[问题]如何在ubuntu下玩暗黑
-
- 帖子: 14
- 注册时间: 2007-10-16 12:48
[问题]如何在ubuntu下玩暗黑
不知道现在还有没有玩暗黑的了,我以前超级喜欢玩,自从安装了ubuntu了就想在ubuntu试一下怎么玩
那位大哥哥,大姐姐教教我啊!我是新手中的新手,最好详细一点,呵呵
那位大哥哥,大姐姐教教我啊!我是新手中的新手,最好详细一点,呵呵
-
- 帖子: 14
- 注册时间: 2007-10-16 12:48
- luojie-dune
- 帖子: 22033
- 注册时间: 2007-07-30 18:28
- 系统: Linux
- 来自: 空气中
那么 是2代吗?
Running Diablo 2 under Wine
by Jesse Allen the3dfxdude at gmail com
Last updated 2008-05-15
Before you get started
This HOWTO only lists information specific to this app. Please keep comments and test reports brief. Please don't post copies of wine logs here! If you have trouble, see other ways of getting help.
Wine+Diablo 2 Status
Generally perfect for Linux users since wine 0.9.12. FreeBSD kernel 6.2 might work, but copy protection will likely be broken.
Minimum Requirements
* winecfg: A drive letter for your cdrom, and running as Win2k, XP or later.
* Support for 640x480 and 800x600 video modes.
* Correct network configuration for online play.
* A REAL COPY OF THE GAME -- The game probably won't work right if you don't have a real copy.
**Bad Versions**
It's recommended to not use these versions of software because they break the game's copy protection:
* Linux vanilla x86 kernel: 2.6.9, 2.6.10
* Linux vanilla x86-64 kernel: 2.6.9-2.6.15
* Linux kernel versions less than 2.6
* Wine built with GCC 4.0.0-4.0.2
* Native msvcrt.dll
* Fedora core 6 modified linux kernel, unless updated to 2.6.18-1.2784.fc6 or later.
* FreeBSD
* Incorrectly installed video drivers
Installing the Game
Launch winecfg to perform the following tasks:
* Make sure the Windows version for Diablo 2 is NT 4.0, 2000, XP, or 2003 for correct copy protection support. Diablo 2 supports Win NT 4.0 or later.
* Create a drive letter for your cdrom if you have not already. For each cdrom drive letter, click advanced, and set the drive type from automatic to cdrom.
It helps to add a device node symlink, so do the following. If your cd-rom drive letter in winecfg is d: and the corresponding device node to your mount point is /dev/hdc then run the following command:
$ ln -s /dev/hdc ~/.wine/dosdevices/d\:\:
Note, you *must* have two colons! You can tell what your device node is in /etc/fstab or viewing your boot-log.
For running the multi-disk install, it helps to run the install using the drive letter and to not switch your shell to the cdrom's path. For example:
~/.wine/drive_c$ wine "D:\setup.exe" (where D: is the assigned letter of your CD drive).
If you run while having a current working directory of /mnt/cdrom, for example, then you will lock the drive and you won't be able to eject the disk.
If during the game's install the progress bar stops, the game is probably prompting you for the next disc, but the dialog is under the installer's window. For full install, the order is Install Disc, Play Disc, then Cinematics Disc. Just swap discs and hit enter when the progress stops.
Running and Playing Diablo 2
Do not use the '-opengl' switch to run the game. Blizzard never completed OpenGL support so they removed it, but left the switch in. All you see when you run it is a badly initialized DDraw mode.
If you use the window option "-w", the game will drop to ddraw mode no matter what.
Do not use virtual desktop with the game! It's not designed to be windowed like that! It still thinks it's full-screen!
If you have missing in-game speech, animation, videos, or crashes between acts, these problems are typically from using a modified executable. Install your game properly.
Multiplayer Setup
Make sure you have the correct ports open. Open outbound and inbound, TCP and UDP, port 6112 and 4000. More on Network Ports
If you are going to play a direct TCP/IP game and the game tells you that it could not detect a valid address, make sure about things:
1. Have a valid internet addressible IP address for internet play or proper NAT forwarding.
2. Have a hostname other than localhost.
3. In /etc/hosts, have a valid hostname of your computer listed with your current IP address you want to use and do not have your hostname listed with 127.0.0.1. Do not have "localhost 127.0.0.1" listed first either.
来自 http://appdb.winehq.org/appview.php?iVersionId=49
我觉得没什么特殊的, 直接安装个wine就可以了吧.
Running Diablo 2 under Wine
by Jesse Allen the3dfxdude at gmail com
Last updated 2008-05-15
Before you get started
This HOWTO only lists information specific to this app. Please keep comments and test reports brief. Please don't post copies of wine logs here! If you have trouble, see other ways of getting help.
Wine+Diablo 2 Status
Generally perfect for Linux users since wine 0.9.12. FreeBSD kernel 6.2 might work, but copy protection will likely be broken.
Minimum Requirements
* winecfg: A drive letter for your cdrom, and running as Win2k, XP or later.
* Support for 640x480 and 800x600 video modes.
* Correct network configuration for online play.
* A REAL COPY OF THE GAME -- The game probably won't work right if you don't have a real copy.
**Bad Versions**
It's recommended to not use these versions of software because they break the game's copy protection:
* Linux vanilla x86 kernel: 2.6.9, 2.6.10
* Linux vanilla x86-64 kernel: 2.6.9-2.6.15
* Linux kernel versions less than 2.6
* Wine built with GCC 4.0.0-4.0.2
* Native msvcrt.dll
* Fedora core 6 modified linux kernel, unless updated to 2.6.18-1.2784.fc6 or later.
* FreeBSD
* Incorrectly installed video drivers
Installing the Game
Launch winecfg to perform the following tasks:
* Make sure the Windows version for Diablo 2 is NT 4.0, 2000, XP, or 2003 for correct copy protection support. Diablo 2 supports Win NT 4.0 or later.
* Create a drive letter for your cdrom if you have not already. For each cdrom drive letter, click advanced, and set the drive type from automatic to cdrom.
It helps to add a device node symlink, so do the following. If your cd-rom drive letter in winecfg is d: and the corresponding device node to your mount point is /dev/hdc then run the following command:
$ ln -s /dev/hdc ~/.wine/dosdevices/d\:\:
Note, you *must* have two colons! You can tell what your device node is in /etc/fstab or viewing your boot-log.
For running the multi-disk install, it helps to run the install using the drive letter and to not switch your shell to the cdrom's path. For example:
~/.wine/drive_c$ wine "D:\setup.exe" (where D: is the assigned letter of your CD drive).
If you run while having a current working directory of /mnt/cdrom, for example, then you will lock the drive and you won't be able to eject the disk.
If during the game's install the progress bar stops, the game is probably prompting you for the next disc, but the dialog is under the installer's window. For full install, the order is Install Disc, Play Disc, then Cinematics Disc. Just swap discs and hit enter when the progress stops.
Running and Playing Diablo 2
Do not use the '-opengl' switch to run the game. Blizzard never completed OpenGL support so they removed it, but left the switch in. All you see when you run it is a badly initialized DDraw mode.
If you use the window option "-w", the game will drop to ddraw mode no matter what.
Do not use virtual desktop with the game! It's not designed to be windowed like that! It still thinks it's full-screen!
If you have missing in-game speech, animation, videos, or crashes between acts, these problems are typically from using a modified executable. Install your game properly.
Multiplayer Setup
Make sure you have the correct ports open. Open outbound and inbound, TCP and UDP, port 6112 and 4000. More on Network Ports
If you are going to play a direct TCP/IP game and the game tells you that it could not detect a valid address, make sure about things:
1. Have a valid internet addressible IP address for internet play or proper NAT forwarding.
2. Have a hostname other than localhost.
3. In /etc/hosts, have a valid hostname of your computer listed with your current IP address you want to use and do not have your hostname listed with 127.0.0.1. Do not have "localhost 127.0.0.1" listed first either.
来自 http://appdb.winehq.org/appview.php?iVersionId=49
我觉得没什么特殊的, 直接安装个wine就可以了吧.
-
- 帖子: 14
- 注册时间: 2007-10-16 12:48
- greatgarlic
- 帖子: 1794
- 注册时间: 2007-07-11 12:31
- 来自: neverland
- 联系:
- luojie-dune
- 帖子: 22033
- 注册时间: 2007-07-30 18:28
- 系统: Linux
- 来自: 空气中
-
- 帖子: 54
- 注册时间: 2006-01-15 18:18
-
- 帖子: 54
- 注册时间: 2006-01-15 18:18
- greatgarlic
- 帖子: 1794
- 注册时间: 2007-07-11 12:31
- 来自: neverland
- 联系:
- yooh
- 帖子: 116
- 注册时间: 2008-01-02 22:16
- 联系:
战网也是可以的。。。。。建议用cedega 简单点
战网问题,直接在.cedega文件夹里的你user.reg里的 把BATLNET注册值改成私服IP如218.93.248.226IMPK的
改后文件段落
[Software\\Blizzard Entertainment\\Diablo II] 1213527145
"AllowHardcore"=dword:00000001
"Always Run"=dword:00000001
"AutoMap Left"=dword:00000000
"AutoMap Party"=dword:00000001
"AutoMap Party Names"=dword:00000001
"AutoMapFade"=dword:00000000
"Aux Battle.net"="216.148.246.34"
"Blended Shadows"=dword:00000000
"BNETIP"="218.93.248.226"
"Contrast"=dword:00000064
"GAMEOVER"=dword:00000000
"Gamma"=dword:000000b9
"Help Menu"=dword:00000001
"InstallPath"="G:\\media\\sda6\\ask\\"
用WINE模拟的在WINE文件夹里的注册表里本地用户locel use?里的blizzard里把battlnet的键值改为私服的ip
viewtopic.php?p=732973&highlight=#732973
有疑问的 PM我
来个图
战网问题,直接在.cedega文件夹里的你user.reg里的 把BATLNET注册值改成私服IP如218.93.248.226IMPK的
改后文件段落
[Software\\Blizzard Entertainment\\Diablo II] 1213527145
"AllowHardcore"=dword:00000001
"Always Run"=dword:00000001
"AutoMap Left"=dword:00000000
"AutoMap Party"=dword:00000001
"AutoMap Party Names"=dword:00000001
"AutoMapFade"=dword:00000000
"Aux Battle.net"="216.148.246.34"
"Blended Shadows"=dword:00000000
"BNETIP"="218.93.248.226"
"Contrast"=dword:00000064
"GAMEOVER"=dword:00000000
"Gamma"=dword:000000b9
"Help Menu"=dword:00000001
"InstallPath"="G:\\media\\sda6\\ask\\"
用WINE模拟的在WINE文件夹里的注册表里本地用户locel use?里的blizzard里把battlnet的键值改为私服的ip
viewtopic.php?p=732973&highlight=#732973
有疑问的 PM我
来个图
- fywww
- 帖子: 138
- 注册时间: 2008-05-18 15:18
- 联系:
- kofshower
- 帖子: 1343
- 注册时间: 2007-03-13 11:23
- 联系: