[已解决]Ubuntu假死时的一部分日志，懂的人帮看看[请为灾区捐款]

[wjpwu]

笔记本电脑 acer 5583，Ubuntu8.04
系统偶尔会假死几秒，比如 用firefox 假死时 firefox浏览器会暗下来。播放音频时会卡住

May 6 14:17:01 user /USR/SBIN/CRON[27224]: (root) CMD ( cd / && run-parts --report /etc/cron.hourly)
May 6 14:30:53 user -- MARK --
May 6 14:36:41 user kernel: [11451.736157] ata1.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
May 6 14:36:41 user kernel: [11451.736177] ata1.01: cmd a0/00:00:00:08:00/00:00:00:00:00/b0 tag 0 pio 8 in
May 6 14:36:41 user kernel: [11451.736179] cdb 25 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
May 6 14:36:41 user kernel: [11451.736181] res 40/00:03:00:00:00/00:00:00:00:00/b0 Emask 0x4 (timeout)
May 6 14:36:41 user kernel: [11451.736187] ata1.01: status: { DRDY }
May 6 14:36:46 user kernel: [11456.771914] ata1: port is slow to respond, please be patient (Status 0xd0)
May 6 14:36:51 user kernel: [11461.753743] ata1: device not ready (errno=-16), forcing hardreset
May 6 14:36:51 user kernel: [11461.753752] ata1: soft resetting link
May 6 14:36:51 user kernel: [11462.146540] ata1.00: configured for UDMA/100
May 6 14:36:51 user kernel: [11462.333808] ata1.01: configured for UDMA/33
May 6 14:36:51 user kernel: [11462.333827] ata1: EH complete
May 6 14:36:51 user kernel: [11462.349865] sd 0:0:0:0: [sda] 234441648 512-byte hardware sectors (120034 MB)
May 6 14:36:52 user kernel: [11462.824486] sd 0:0:0:0: [sda] Write Protect is off
May 6 14:36:52 user kernel: [11462.824495] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
May 6 14:36:52 user kernel: [11462.852530] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
May 6 14:36:52 user kernel: [11462.880787] sd 0:0:0:0: [sda] 234441648 512-byte hardware sectors (120034 MB)
May 6 14:36:52 user kernel: [11462.900425] sd 0:0:0:0: [sda] Write Protect is off
May 6 14:36:52 user kernel: [11462.900434] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
May 6 14:36:52 user kernel: [11462.936384] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
May 6 14:50:53 user -- MARK --

[wjpwu]

May 9 10:19:07 wjpwu-desktop kernel: [ 1424.591071] ata1.01: qc timeout (cmd 0xa0)
May 9 10:19:07 wjpwu-desktop kernel: [ 1424.591091] ata1.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
May 9 10:19:07 wjpwu-desktop kernel: [ 1424.591107] ata1.01: cmd a0/00:00:00:0c:00/00:00:00:00:00/b0 tag 0 pio 12 in
May 9 10:19:07 wjpwu-desktop kernel: [ 1424.591109] cdb 43 00 00 00 00 00 00 00 0c 00 00 00 00 00 00 00
May 9 10:19:07 wjpwu-desktop kernel: [ 1424.591112] res 51/20:03:00:00:00/00:00:00:00:00/b0 Emask 0x5 (timeout)
May 9 10:19:07 wjpwu-desktop kernel: [ 1424.591117] ata1.01: status: { DRDY ERR }
May 9 10:19:12 wjpwu-desktop kernel: [ 1427.620550] ata1: port is slow to respond, please be patient (Status 0xd1)
May 9 10:19:17 wjpwu-desktop kernel: [ 1430.805468] ata1: device not ready (errno=-16), forcing hardreset
May 9 10:19:17 wjpwu-desktop kernel: [ 1430.805477] ata1: soft resetting link
May 9 10:19:17 wjpwu-desktop kernel: [ 1431.000683] ata1.00: configured for UDMA/100
May 9 10:19:17 wjpwu-desktop kernel: [ 1431.114059] ata1.01: configured for UDMA/33
May 9 10:19:17 wjpwu-desktop kernel: [ 1431.114085] ata1: EH complete
May 9 10:19:17 wjpwu-desktop kernel: [ 1431.124170] sd 0:0:0:0: [sda] 234441648 512-byte hardware sectors (120034 MB)
May 9 10:19:17 wjpwu-desktop kernel: [ 1431.137854] sd 0:0:0:0: [sda] Write Protect is off
May 9 10:19:17 wjpwu-desktop kernel: [ 1431.137861] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
May 9 10:19:17 wjpwu-desktop kernel: [ 1431.156274] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
May 9 10:19:17 wjpwu-desktop kernel: [ 1431.169656] sd 0:0:0:0: [sda] 234441648 512-byte hardware sectors (120034 MB)
May 9 10:19:17 wjpwu-desktop kernel: [ 1431.175919] sd 0:0:0:0: [sda] Write Protect is off
May 9 10:19:17 wjpwu-desktop kernel: [ 1431.175925] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
May 9 10:19:17 wjpwu-desktop kernel: [ 1431.196407] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA

[wjpwu]

uname -a
Linux wjpwu-desktop 2.6.24-17-generic #1 SMP Thu May 1 14:31:33 UTC 2008 i686 GNU/Linux
dmesg部分
[ 20.067393] ata_piix 0000:00:1f.1: version 2.12
[ 20.067417] ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 18
[ 20.067472] PCI: Setting latency timer of device 0000:00:1f.1 to 64
[ 20.067551] scsi0 : ata_piix
[ 20.067601] scsi1 : ata_piix
[ 20.067729] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x1880 irq 14
[ 20.067732] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x1888 irq 15
[ 20.194025] Clocksource tsc unstable (delta = -1690410389 ns)
[ 20.199004] Time: hpet clocksource has been installed.
[ 20.260895] ata1.00: ATA-7: SAMSUNG HM120JC, YL100-19, max UDMA/100
[ 20.260901] ata1.00: 234441648 sectors, multi 16: LBA48
[ 20.260948] ata1.01: ATAPI: TSSTcorpCD/DVDW TS-L632D, ac00, max UDMA/33
[ 20.263079] ata1.00: configured for UDMA/100
[ 20.278153] ata1.01: configured for UDMA/33
[ 20.314684] scsi 0:0:0:0: Direct-Access ATA SAMSUNG HM120JC YL10 PQ: 0 ANSI: 5
[ 20.315735] scsi 0:0:1:0: CD-ROM TSSTcorp CD/DVDW TS-L632D ac00 PQ: 0 ANSI: 5
[ 20.327914] Driver 'sd' needs updating - please use bus_type methods
[ 20.327985] sd 0:0:0:0: [sda] 234441648 512-byte hardware sectors (120034 MB)
[ 20.327997] sd 0:0:0:0: [sda] Write Protect is off
[ 20.328000] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 20.328017] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 20.328064] sd 0:0:0:0: [sda] 234441648 512-byte hardware sectors (120034 MB)
[ 20.328075] sd 0:0:0:0: [sda] Write Protect is off
[ 20.328077] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 20.328094] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 20.328097] sda:<4>Driver 'sr' needs updating - please use bus_type methods
[ 20.359611] sda1 sda2 < sda5 sda6 sda7 sda8 sda9 sda10 sda11 >
[ 20.444389] sd 0:0:0:0: [sda] Attached SCSI disk
[ 20.449986] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 20.450006] sr 0:0:1:0: Attached scsi generic sg1 type 5
[ 20.456400] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[ 20.456404] Uniform CD-ROM driver Revision: 3.20
[ 20.456459] sr 0:0:1:0: Attached scsi CD-ROM sr0

[wjpwu]

dmesg > dmesg.log
sudo lspci -vvnn > lspci-vvnn.log


帮看看，谢谢~

[wjpwu]

问题已找到，是光驱TS-L632D所致。
现在的做法是将固件强行刷到SC04版,以前是AC00版。
ata1.01: ATAPI: TSSTcorpCD/DVDW TS-L632D, SC04, max UDMA/33.
现在在观察期,出现同样问题再报告。

另外，希望大家涌跃为四川振灾捐款捐物，帮助他们渡过最困难的时期，都是同胞，同舟共济！

[qianjigui]

貌似我也出现了类似的问题。菜鸟我问一句，这个固件是如何刷新的？谢谢.

[stevegy]

好像8.0.4现在的kernel 2.6.24-17磁盘设备的驱动还是有问题的，用2.6.22，一切都没有问题，包括我现在机器上的HPT366的IDE卡，都一切正常的，但是升级到8.0.4的内核，现在启动的时候就死掉了，最后显示的是
sda:<4>Driver 'sr' needs updating - please use bus_type methods
google了好久了，一直找不到就解决

[frankyong]

我也有同样的问题阿，没次都期待新的版本里能够解决，为什么要这么对我，阿阿阿阿阿
[ 787.006584] ata1.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[ 787.006605] ata1.01: cmd a0/00:00:00:00:00/00:00:00:00:00/b0 tag 0
[ 787.006607] cdb 1e 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 787.006609] res 40/00:02:00:08:00/00:00:00:00:00/b0 Emask 0x4 (timeout)
[ 787.006616] ata1.01: status: { DRDY }
[ 792.044137] ata1: link is slow to respond, please be patient (ready=0)
[ 797.028021] ata1: device not ready (errno=-16), forcing hardreset
[ 797.028033] ata1: soft resetting link
[ 797.256561] ata1.00: configured for UDMA/100
[ 797.288305] ata1.01: configured for UDMA/33
[ 797.296418] ata1: EH complete
[ 1172.007666] ata1.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[ 1172.007687] ata1.01: cmd a0/00:00:00:00:00/00:00:00:00:00/b0 tag 0
[ 1172.007689] cdb 1e 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 1172.007691] res 40/00:02:00:08:00/00:00:00:00:00/b0 Emask 0x4 (timeout)
[ 1172.007698] ata1.01: status: { DRDY }
[ 1177.049230] ata1: link is slow to respond, please be patient (ready=0)
[ 1182.041181] ata1: device not ready (errno=-16), forcing hardreset
[ 1182.041197] ata1: soft resetting link
[ 1182.245831] ata1.00: configured for UDMA/100
[ 1182.277499] ata1.01: configured for UDMA/33
[ 1182.285665] ata1: EH complete
[ 1782.541657] ata1.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[ 1782.541666] ata1.01: ST_FIRST: !(DRQ|ERR|DF)
[ 1782.541682] ata1.01: cmd a0/00:00:00:00:00/00:00:00:00:00/b0 tag 0
[ 1782.541685] cdb 1e 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 1782.541687] res 50/00:00:00:00:00/00:00:00:00:00/b0 Emask 0x2 (HSM violation)
[ 1782.541693] ata1.01: status: { DRDY }
[ 1782.541737] ata1: soft resetting link
[ 1782.744787] ata1.00: configured for UDMA/100
[ 1782.784496] ata1.01: configured for UDMA/33
[ 1782.792627] ata1: EH complete
[ 1942.756158] __ratelimit: 3 callbacks suppressed
[ 1942.756164] ACPI: EC: missing confirmations, switch off interrupt mode.
[ 2676.007232] ata1.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[ 2676.007254] ata1.01: cmd a0/00:00:00:08:00/00:00:00:00:00/b0 tag 0 pio 16392 in
[ 2676.007257] cdb 4a 01 00 00 10 00 00 00 08 00 00 00 00 00 00 00
[ 2676.007259] res 40/00:03:00:00:00/00:00:00:00:00/b0 Emask 0x4 (timeout)
[ 2676.007265] ata1.01: status: { DRDY }
[ 2681.053060] ata1: link is slow to respond, please be patient (ready=0)
[ 2686.045140] ata1: device not ready (errno=-16), forcing hardreset
[ 2686.045156] ata1: soft resetting link
[ 2686.265855] ata1.00: configured for UDMA/100
[ 2686.305526] ata1.01: configured for UDMA/33
[ 2686.316955] ata1: EH complete

[zwhuang]

怎么刷啊，我这也有类似的问题

代码： 全选

[  521.000064] ata1: lost interrupt (Status 0x58)
[  521.004021] ata1: drained 32768 bytes to clear DRQ.
[  521.093440] ata1.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[  521.093466] ata1.01: cmd a0/00:00:00:00:00/00:00:00:00:00/b0 tag 0
[  521.093469]          cdb 00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00
[  521.093473]          res 58/00:01:00:00:00/00:00:00:00:00/b0 Emask 0x2 (HSM violation)
[  521.093481] ata1.01: status: { DRDY DRQ }
[  521.093525] ata1: soft resetting link
[  521.296512] ata1.00: configured for UDMA/100
[  521.328357] ata1.01: configured for UDMA/33
[  521.348150] ata1: EH complete
[  921.000052] ata1: lost interrupt (Status 0x58)
[  921.004017] ata1: drained 32768 bytes to clear DRQ.
[  921.093319] ata1.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[  921.093345] ata1.01: cmd a0/00:00:00:00:00/00:00:00:00:00/b0 tag 0
[  921.093348]          cdb 00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00
[  921.093351]          res 58/00:01:00:00:00/00:00:00:00:00/b0 Emask 0x2 (HSM violation)
[  921.093360] ata1.01: status: { DRDY DRQ }
[  921.093403] ata1: soft resetting link
[  921.296507] ata1.00: configured for UDMA/100
[  921.328353] ata1.01: configured for UDMA/33
[  921.348116] ata1: EH complete

ata1.01是光驱

代码： 全选

[    0.996611] ata1.01: ATAPI: TSSTcorpCDW/DVD TS-L462D, CH00, max UDMA/33
[    1.012447] ata1.00: configured for UDMA/100
[    1.044489] ata1.01: configured for UDMA/33

问题已找到，是光驱TS-L632D所致。
现在的做法是将固件强行刷到SC04版,以前是AC00版。
ata1.01: ATAPI: TSSTcorpCD/DVDW TS-L632D, SC04, max UDMA/33.
现在在观察期,出现同样问题再报告。

另外，希望大家涌跃为四川振灾捐款捐物，帮助他们渡过最困难的时期，都是同胞，同舟共济！

[qianjigui]

具体固件烧写方法，参加 http://qianjigui.javaeye.com/blog/900571