[分享]nVIDIA gefoce4 MX 440显卡安装成功

[Cnchina]

之前两天按网上去下载最新的.run包，但一直编译不过（参考了网上很多地方的方法，都没成功）。
今天重做了系统后，头件事去搞显卡驱动。

在“受限硬件驱动”里，安装了驱动，重启后只能调到800*600。
我再装上nvidia-settings，发现能调整分辩率，我调到1280*960，保存入xorg.conf。我是HYUNDAI ImageFlat F771D的显示器，但nvidia-settings认为是IQT F770。不过也无大碍。
但重启后显卡又不能正常工作了（黑屏）。
再重启，在recovery mode里面把Xorg的设置重设。
再进桌面，用nvidia-settings改过分辩率后保存设置，显示正常。

这时，我修改/etc/X11/xorg.conf文件，
发现nvidia-settings保存Xorg设定的时候并没有删除原来不正确的设置，而直接在每项后面增加自己的设置。
那么我就把原来带的设置那几行给用#注释掉。

再重启的时候，已经完全没问题了。

[Cnchina]

我把xorg.conf弄上来看下：

代码： 全选

# nvidia-settings: X configuration file generated by nvidia-settings
# nvidia-settings:  version 1.0  (buildd@vernadsky)  Tue Mar  4 20:24:34 UTC 2008

# xorg.conf (X.Org X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the xorg.conf manual page.
# (Type "man xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
#   sudo dpkg-reconfigure -phigh xserver-xorg

Section "ServerLayout"
    Identifier     "Default Layout"
    Screen      0  "Screen0" 0 0
EndSection

Section "Module"
    Load           "glx"
EndSection

Section "ServerFlags"
    Option         "Xinerama" "0"
EndSection

Section "InputDevice"
    Identifier     "Generic Keyboard"
    Driver         "kbd"
    Option         "XkbRules" "xorg"
    Option         "XkbModel" "pc105"
    Option         "XkbLayout" "cn"
    Option         "XkbOptions" "lv3:ralt_switch"
EndSection

Section "InputDevice"
    Identifier     "Configured Mouse"
    Driver         "mouse"
    Option         "CorePointer"
EndSection

#Section "Monitor"
#    Identifier     "Configured Monitor"
#EndSection

Section "Monitor"
    Identifier     "Monitor0"
    VendorName     "Unknown"
    ModelName      "IQT F770"
    HorizSync       30.0 - 70.0
    VertRefresh     50.0 - 150.0
EndSection

#Section "Device"
#    Identifier     "Configured Video Device"
#    Driver         "nvidia"
#    Option         "NoLogo" "True"
#EndSection

Section "Device"
    Identifier     "Videocard0"
    Driver         "nvidia"
    VendorName     "NVIDIA Corporation"
    BoardName      "GeForce4 MX 440 with AGP8X"
EndSection

#Section "Screen"
#    Identifier     "Default Screen"
#    Device         "Configured Video Device"
#    Monitor        "Configured Monitor"
#    DefaultDepth    24
#    Option         "AddARGBGLXVisuals" "True"
#EndSection

Section "Screen"
    Identifier     "Screen0"
    Device         "Videocard0"
    Monitor        "Monitor0"
    DefaultDepth    24
    Option         "TwinView" "0"
    Option         "TwinViewXineramaInfoOrder" "CRT-0"
    Option         "metamodes" "CRT: 1280x960 +0+0"
EndSection

中间几行加＃号的是我注释掉的。[/code]

[janry]

，我是新手

[hcym]

，我是新手

掉坑里了还笑

MX 440

[bjsm]

这也值得炫耀么？

[Cnchina]

你认为我炫耀么。。。
本着分享原则罢了。。

[dexle]

呵呵 学习一下！！我是nv 6100集成显卡！