[原创]用vmware安装(ubuntu-6.06-desktop-i386)Dapper到硬盘
版面规则
我们都知道新人的确很菜,也喜欢抱怨,并且带有浓厚的Windows习惯,但既然在这里询问,我们就应该有责任帮助他们解决问题,而不是直接泼冷水、简单的否定或发表对解决问题没有任何帮助的帖子。乐于分享,以人为本,这正是Ubuntu的精神所在。
我们都知道新人的确很菜,也喜欢抱怨,并且带有浓厚的Windows习惯,但既然在这里询问,我们就应该有责任帮助他们解决问题,而不是直接泼冷水、简单的否定或发表对解决问题没有任何帮助的帖子。乐于分享,以人为本,这正是Ubuntu的精神所在。
-
- 帖子: 6
- 注册时间: 2006-03-05 19:33
[原创]用vmware安装(ubuntu-6.06-desktop-i386)Dapper到硬盘
硬盘安装有问题的可以参考这种方法,注意vmware建立虚拟机的时候要选择安装到物理硬盘上
Edited by karron
=============================
我用的是西安交大linux服务器ftp://ftp.xjtu.edu.cn下载的iso
大家可以用其他的可以直接硬盘安装的镜像xubuntu-6.06-alternate-i386.iso
我使用的windows+linux双启动 使用OS Loader 引导linux
我用这个方法可以安装成功 但不敢保证所有人都会成功 这里只是告诉大家一种可选的方法
1
安装vmware ftp://ftp.xjtu.edu.cn/XJTU/NewSoftware/ ... %B0%E6.rar
2
下载ubuntu6.06镜像
ftp://linux.xjtu.edu.cn/incoming/Os/lin ... p-i386.iso
ubuntu-6.06-desktop-i386(这个其实也可以硬盘安装的:-))
3
启动vmware
新建一个虚拟机
注意使用custom模式,选择硬盘时选用physical disk,下一步选择整个硬盘
完成后将将镜像挂在光驱上
4
启动刚才建立的虚拟机
开机时按ESC
选择光驱启动
选择start or install Ubuntu
5
进入桌面后
双击 intall
按提示一步一步往下进行 按照平时装系统的步骤 选时区 分区 设置用户和计算机标识
这是我的分区
/dev/hda1 #C:盘 主分区
/dev/hda2 /boot #linux /boot分区 主分区
/dev/hda5 swap
/dev/hda6 /
/dev/hda7 /home
grub 安装在 /dev/hda2 上
打开一个终端
$sudo mount /dev/hda1 /mnt -t vfat -o rw
$sudo dd if=/dev/hda2 of=/mnt/linux.lnx bs=512 count=1
$vi /mnt/boot.ini
加入"c:\linux.lnx="Ubuntu 6.06"
安装完成 关闭虚拟机
6
重启电脑
启动linux
出现 X 错误后
用字符终端登陆
$sudo dpkg-reconfigure xserver-xorg
重新配置xserver
7
之后就可以
$startx
进入桌面了
剩下的事就参照ubuntu.com.cn 的论坛的各种优化设置帖子设置就OK了
上次由 xgnid 在 2006-06-03 12:55,总共编辑 1 次。
- Bailuhuaxiang
- 帖子: 96
- 注册时间: 2006-03-24 18:27
-
- 帖子: 15
- 注册时间: 2005-04-27 18:25
- karron
- 帖子: 6226
- 注册时间: 2005-06-11 14:03
- 来自: 不明真相的群众
- 联系:
楼上的,仔细看看上面的步骤,你执行过6,7两步吗
6
重启电脑
启动linux
出现 X 错误后
用字符终端登陆
$sudo dpkg-reconfigure xserver-xorg
重新配置xserver
7
之后就可以
$startx
进入桌面了
剩下的事就参照ubuntu.com.cn 的论坛的各种优化设置帖子设置就OK了
6
重启电脑
启动linux
出现 X 错误后
用字符终端登陆
$sudo dpkg-reconfigure xserver-xorg
重新配置xserver
7
之后就可以
$startx
进入桌面了
剩下的事就参照ubuntu.com.cn 的论坛的各种优化设置帖子设置就OK了
我的blog,关于技术,软件,linux,vim <---- 所有博客均被河蟹.
- ellickif
- 帖子: 58
- 注册时间: 2006-05-02 2:11
- Bailuhuaxiang
- 帖子: 96
- 注册时间: 2006-03-24 18:27
-
- 帖子: 16
- 注册时间: 2005-11-03 18:16
-
- 帖子: 17
- 注册时间: 2006-02-08 14:10
-
- 帖子: 6
- 注册时间: 2006-03-05 19:33
-
- 帖子: 41
- 注册时间: 2005-07-15 11:26
请问如何修正,我现在就碰到这个问题了alyroot 写了:我光盘引导安装竟然不成功,说不兼容我的光驱。感觉6.06安装程序反而不如老版啊
我后来按照楼主的办法安装成功了,我的osx(完美支持啊,qe和ci都支持)也是这样安装的说,现在是三个桌面系统都有了(用grub引导)。
我安装过程中没有让选择grub安装到哪里去,直接给我安装到mbr了。另外因为vmware里把你的硬盘认作了hdx设备,如果是sata硬盘的话,安装好了须做下修正,主要是引导配置文件和fstab文件。否则引导到root system里就死在那里了。
我的fstab
代码: 全选
# /etc/fstab: static file system information.
#
# <file system> <mount point> <type> <options> <dump> <pass>
proc /proc proc defaults 0 0
/dev/hda9 / ext3 defaults,errors=remount-ro 0 1
/dev/hda1 /media/hda1 ntfs defaults,nls=utf8,umask=007,gid=46 0 1
/dev/hda5 /media/hda5 vfat defaults,utf8,umask=007,gid=46 0 1
/dev/hda6 /media/hda6 vfat defaults,utf8,umask=007,gid=46 0 1
/dev/hda7 /media/hda7 vfat defaults,utf8,umask=007,gid=46 0 1
/dev/hda8 /media/hda8 vfat defaults,utf8,umask=007,gid=46 0 1
/dev/hda10 none swap sw 0 0
/dev/hdc /media/cdrom0 udf,iso9660 user,noauto 0 0
代码: 全选
## ## Start Default Options ##
## default kernel options
## default kernel options for automagic boot options
## If you want special options for specific kernels use kopt_x_y_z
## where x.y.z is kernel version. Minor versions can be omitted.
## e.g. kopt=root=/dev/hda1 ro
## kopt_2_6_8=root=/dev/hdc1 ro
## kopt_2_6_8_2_686=root=/dev/hdc2 ro
# kopt=root=/dev/hda9 ro
## default grub root device
## e.g. groot=(hd0,0)
# groot=(hd0,8)
## should update-grub create alternative automagic boot options
## e.g. alternative=true
## alternative=false
# alternative=true
## should update-grub lock alternative automagic boot options
## e.g. lockalternative=true
## lockalternative=false
# lockalternative=false
## additional options to use with the default boot option, but not with the
## alternatives
## e.g. defoptions=vga=791 resume=/dev/hda5
# defoptions=quiet splash
## altoption boot targets option
## multiple altoptions lines are allowed
## e.g. altoptions=(extra menu suffix) extra boot options
## altoptions=(recovery mode) single
# altoptions=(recovery mode) single
## controls how many kernels should be put into the menu.lst
## only counts the first occurence of a kernel, not the
## alternative kernel options
## e.g. howmany=all
## howmany=7
# howmany=all
## should update-grub create memtest86 boot option
## e.g. memtest86=true
## memtest86=false
# memtest86=true
## should update-grub adjust the value of the default booted system
## can be true or false
# updatedefaultentry=false
## ## End Default Options ##
title Ubuntu, kernel 2.6.15-23-amd64-generic
root (hd0,8)
kernel /boot/vmlinuz-2.6.15-23-amd64-generic root=/dev/hda9 ro quiet splash
initrd /boot/initrd.img-2.6.15-23-amd64-generic
savedefault
boot
title Ubuntu, kernel 2.6.15-23-amd64-generic (recovery mode)
root (hd0,8)
kernel /boot/vmlinuz-2.6.15-23-amd64-generic root=/dev/hda9 ro single
initrd /boot/initrd.img-2.6.15-23-amd64-generic
boot
title Ubuntu, memtest86+
root (hd0,8)
kernel /boot/memtest86+.bin
boot
### END DEBIAN AUTOMAGIC KERNELS LIST
# This is a divider, added to separate the menu items below from the Debian
# ones.
title Other operating systems:
root
# This entry automatically added by the Debian installer for a non-linux OS
# on /dev/hda1
title Microsoft Windows XP Professional
root (hd0,0)
savedefault
makeactive
chainloader +1