[问题]无法复制文件

[Einhorn]

我的7.10突然不能复制任何文件了，用了cp命令后会提示input/output error

就连从镜像文件往dvd里刻录也是这种情况，请问是什么问题，如何解决？

[Einhorn]

我在补充点我的启动信息和错误信息
[/img]

[Einhorn]

下面是我的启动日志
[ 0.000000] Linux version 2.6.22-15-generic (buildd@terranova) (gcc version 4.1.3 20070929 (prerelease) (Ubuntu 4.1.2-16ubuntu2)) #1 SMP Fri Jul 11 19:25:33 UTC 2008 (Ubuntu 2.6.22-15.56-generic)
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 0000000000096800 (usable)
[ 0.000000] BIOS-e820: 0000000000096800 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000007ffef800 (usable)
[ 0.000000] BIOS-e820: 000000007ffef800 - 000000007fff0000 (reserved)
[ 0.000000] BIOS-e820: 000000007fff0000 - 000000007fff3000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000007fff3000 - 0000000080000000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
[ 0.000000] 1151MB HIGHMEM available.
[ 0.000000] 896MB LOWMEM available.
[ 0.000000] found SMP MP-table at 000f3970
[ 0.000000] Entering add_active_range(0, 0, 524271) 0 entries of 256 used
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0 -> 4096
[ 0.000000] Normal 4096 -> 229376
[ 0.000000] HighMem 229376 -> 524271
[ 0.000000] early_node_map[1] active PFN ranges
[ 0.000000] 0: 0 -> 524271
[ 0.000000] On node 0 totalpages: 524271
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 4064 pages, LIFO batch:0
[ 0.000000] Normal zone: 1760 pages used for memmap
[ 0.000000] Normal zone: 223520 pages, LIFO batch:31
[ 0.000000] HighMem zone: 2303 pages used for memmap
[ 0.000000] HighMem zone: 292592 pages, LIFO batch:31
[ 0.000000] DMI 2.2 present.
[ 0.000000] ACPI: RSDP signature @ 0xC00F7AB0 checksum 0
[ 0.000000] ACPI: RSDP 000F7AB0, 0014 (r0 IntelR)
[ 0.000000] ACPI: RSDT 7FFF3040, 0030 (r1 IntelR AWRDACPI 42302E31 AWRD 0)
[ 0.000000] ACPI: FACP 7FFF30C0, 0074 (r1 IntelR AWRDACPI 42302E31 AWRD 0)
[ 0.000000] ACPI: DSDT 7FFF3180, 44A7 (r1 INTELR AWRDACPI 1000 MSFT 100000E)
[ 0.000000] ACPI: FACS 7FFF0000, 0040
[ 0.000000] ACPI: MCFG 7FFF7780, 003C (r1 IntelR AWRDACPI 42302E31 AWRD 0)
[ 0.000000] ACPI: APIC 7FFF7680, 0084 (r1 IntelR AWRDACPI 42302E31 AWRD 0)
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] Processor #0 6:15 APIC version 20
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] Processor #1 6:15 APIC version 20
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] disabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 4, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] Allocating PCI resources starting at 88000000 (gap: 80000000:60000000)
[ 0.000000] Built 1 zonelists. Total pages: 520176
[ 0.000000] Kernel command line: root=UUID=a1651cba-9e39-415b-9edb-aa740168728c ro quiet splash
[ 0.000000] mapped APIC to ffffd000 (fee00000)
[ 0.000000] mapped IOAPIC to ffffc000 (fec00000)
[ 0.000000] Enabling fast FPU save and restore... done.
[ 0.000000] Enabling unmasked SIMD FPU exception support... done.
[ 0.000000] Initializing CPU#0
[ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes)
[ 0.000000] Detected 1804.216 MHz processor.
[ 23.698317] Console: colour VGA+ 80x25
[ 23.698553] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 23.698897] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 23.824310] Memory: 2067548k/2097084k available (2016k kernel code, 28172k reserved, 919k data, 364k init, 1179580k highmem)
[ 23.824322] virtual kernel memory layout:
[ 23.824324] fixmap : 0xfff4d000 - 0xfffff000 ( 712 kB)
[ 23.824325] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 23.824327] vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB)
[ 23.824328] lowmem : 0xc0000000 - 0xf8000000 ( 896 MB)
[ 23.824330] .init : 0xc03e3000 - 0xc043e000 ( 364 kB)
[ 23.824331] .data : 0xc02f8046 - 0xc03dde84 ( 919 kB)
[ 23.824333] .text : 0xc0100000 - 0xc02f8046 (2016 kB)
[ 23.824337] Checking if this processor honours the WP bit even in supervisor mode... Ok.
[ 23.824380] SLUB: Genslabs=22, HWalign=64, Order=0-1, MinObjects=4, CPUs=2, Nodes=1
[ 23.904323] Calibrating delay using timer specific routine.. 3611.57 BogoMIPS (lpj=7223148)
[ 23.904352] Security Framework v1.0.0 initialized
[ 23.904358] SELinux: Disabled at boot.
[ 23.904374] Mount-cache hash table entries: 512
[ 23.904518] CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0000e39d 00000000 00000001
[ 23.904528] monitor/mwait feature present.
[ 23.904531] using mwait in idle threads.
[ 23.904536] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 23.904539] CPU: L2 cache: 2048K
[ 23.904542] CPU: Physical Processor ID: 0
[ 23.904545] CPU: Processor Core ID: 0
[ 23.904547] CPU: After all inits, caps: bfebfbff 20100000 00000000 00003940 0000e39d 00000000 00000001
[ 23.904559] Compat vDSO mapped to ffffe000.
[ 23.904575] Checking 'hlt' instruction... OK.
[ 23.920429] SMP alternatives: switching to UP code
[ 23.920935] Early unpacking initramfs... done
[ 24.371976] ACPI: Core revision 20070126
[ 24.372029] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found.
[ 24.374897] CPU0: Intel(R) Core(TM)2 CPU 4300 @ 1.80GHz stepping 02
[ 24.374916] SMP alternatives: switching to SMP code
[ 24.374985] Booting processor 1/1 eip 3000
[ 24.385262] Initializing CPU#1
[ 24.463762] Calibrating delay using timer specific routine.. 3608.47 BogoMIPS (lpj=7216958)
[ 24.463770] CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0000e39d 00000000 00000001
[ 24.463777] monitor/mwait feature present.
[ 24.463780] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 24.463783] CPU: L2 cache: 2048K
[ 24.463785] CPU: Physical Processor ID: 0
[ 24.463787] CPU: Processor Core ID: 1
[ 24.463789] CPU: After all inits, caps: bfebfbff 20100000 00000000 00003940 0000e39d 00000000 00000001
[ 24.464492] CPU1: Intel(R) Core(TM)2 CPU 4300 @ 1.80GHz stepping 02
[ 24.464516] Total of 2 processors activated (7220.05 BogoMIPS).
[ 24.464660] ENABLING IO-APIC IRQs
[ 24.464841] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 24.611725] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
[ 24.631726] Brought up 2 CPUs
[ 24.787274] migration_cost=73
[ 24.787415] Booting paravirtualized kernel on bare hardware
[ 24.787486] Time: 23:57:44 Date: 06/24/108
[ 24.787508] NET: Registered protocol family 16
[ 24.787603] EISA bus registered
[ 24.787609] ACPI: bus type pci registered
[ 24.788493] PCI: PCI BIOS revision 3.00 entry at 0xfa030, last bus=2
[ 24.788496] PCI: Using configuration type 1
[ 24.788498] Setting up standard PCI resources
[ 24.791363] ACPI: EC: Look up EC in DSDT
[ 24.796954] ACPI: Interpreter enabled
[ 24.796957] ACPI: (supports S0 S1 S4 S5)
[ 24.796979] ACPI: Using IOAPIC for interrupt routing
[ 24.804534] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 24.804541] PCI: Probing PCI hardware (bus 00)
[ 24.805182] PCI quirk: region 0400-047f claimed by ICH6 ACPI/GPIO/TCO
[ 24.805187] PCI quirk: region 0480-04bf claimed by ICH6 GPIO
[ 24.805668] PCI: Transparent bridge - 0000:00:1e.0
[ 24.805711] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 24.805940] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
[ 24.819574] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 *5 7 9 10 11 12 14 15)
[ 24.819725] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 9 *10 11 12 14 15)
[ 24.819873] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 9 10 *11 12 14 15)
[ 24.820020] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 9 10 *11 12 14 15)
[ 24.820166] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 9 *10 11 12 14 15)
[ 24.820313] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
[ 24.820460] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 7 *9 10 11 12 14 15)
[ 24.820606] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
[ 24.820755] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 24.820768] pnp: PnP ACPI init
[ 24.820779] ACPI: bus type pnp registered
[ 24.824586] pnp: PnP ACPI: found 14 devices
[ 24.824589] ACPI: ACPI bus type pnp unregistered
[ 24.824596] PnPBIOS: Disabled by ACPI PNP
[ 24.824654] PCI: Using ACPI for IRQ routing
[ 24.824657] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
[ 24.842686] NET: Registered protocol family 8
[ 24.842689] NET: Registered protocol family 20
[ 24.842759] pnp: 00:0a: ioport range 0x400-0x4bf could not be reserved
[ 24.842767] pnp: 00:0c: iomem range 0xe0000000-0xefffffff could not be reserved
[ 24.842774] pnp: 00:0d: iomem range 0xf0000-0xfffff could not be reserved
[ 24.842778] pnp: 00:0d: iomem range 0x7fff0000-0x7fffffff could not be reserved
[ 24.842782] pnp: 00:0d: iomem range 0x0-0x9ffff could not be reserved
[ 24.842786] pnp: 00:0d: iomem range 0x100000-0x7ffeffff could not be reserved
[ 24.843401] Time: tsc clocksource has been installed.
[ 24.873155] PCI: Bridge: 0000:00:01.0
[ 24.873158] IO window: c000-cfff
[ 24.873164] MEM window: fdd00000-fddfffff
[ 24.873168] PREFETCH window: d0000000-dfffffff
[ 24.873173] PCI: Bridge: 0000:00:1e.0
[ 24.873176] IO window: d000-dfff
[ 24.873182] MEM window: fdc00000-fdcfffff
[ 24.873187] PREFETCH window: fde00000-fdefffff
[ 24.873204] ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 24.873211] PCI: Setting latency timer of device 0000:00:01.0 to 64
[ 24.873223] PCI: Setting latency timer of device 0000:00:1e.0 to 64
[ 24.873235] NET: Registered protocol family 2
[ 24.915356] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 24.915410] TCP established hash table entries: 131072 (order: 8, 1572864 bytes)
[ 24.916202] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 24.916492] TCP: Hash tables configured (established 131072 bind 65536)
[ 24.916495] TCP reno registered
[ 24.927498] checking if image is initramfs... it is
[ 25.370990] Switched to high resolution mode on CPU 1
[ 25.374868] Switched to high resolution mode on CPU 0
[ 25.819030] Freeing initrd memory: 7050k freed
[ 25.819701] audit: initializing netlink socket (disabled)
[ 25.819717] audit(1216943864.400:1): initialized
[ 25.819841] highmem bounce pool size: 64 pages
[ 25.822378] VFS: Disk quotas dquot_6.5.1
[ 25.822442] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 25.822545] io scheduler noop registered
[ 25.822548] io scheduler anticipatory registered
[ 25.822550] io scheduler deadline registered
[ 25.822568] io scheduler cfq registered (default)
[ 25.822683] Boot video device is 0000:01:00.0
[ 25.822779] PCI: Setting latency timer of device 0000:00:01.0 to 64
[ 25.822825] assign_interrupt_mode Found MSI capability
[ 25.822829] Allocate Port Service[0000:00:01.0:pcie00]
[ 25.823007] isapnp: Scanning for PnP cards...
[ 26.175760] isapnp: No Plug & Play device found
[ 26.203268] Real Time Clock Driver v1.12ac
[ 26.203398] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[ 26.203496] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 26.204185] 00:06: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 26.205122] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[ 26.205393] input: Macintosh mouse button emulation as /class/input/input0
[ 26.205500] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 26.208351] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 26.208357] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 26.208559] mice: PS/2 mouse device common for all mice
[ 26.208698] EISA: Probing bus 0 at eisa.0
[ 26.208731] EISA: Detected 0 cards.
[ 26.208826] TCP cubic registered
[ 26.208840] NET: Registered protocol family 1
[ 26.208865] Using IPI No-Shortcut mode
[ 26.209040] Magic number: 0:693:1010
[ 26.209289] Freeing unused kernel memory: 364k freed
[ 26.227587] input: AT Translated Set 2 keyboard as /class/input/input1
[ 27.469580] AppArmor: AppArmor initialized<5>audit(1216943866.400:2): type=1505 info="AppArmor initialized" pid=1216
[ 27.477541] fuse init (API version 7.8)
[ 27.483392] Failure registering capabilities with primary security module.
[ 27.510092] ACPI: Fan [FAN] (on)
[ 27.516555] ACPI Exception (processor_core-0783): AE_NOT_FOUND, Processor Device is not present [20070126]
[ 27.516568] ACPI Exception (processor_core-0783): AE_NOT_FOUND, Processor Device is not present [20070126]
[ 27.518427] ACPI: Thermal Zone [THRM] (40 C)
[ 28.065326] usbcore: registered new interface driver usbfs
[ 28.065354] usbcore: registered new interface driver hub
[ 28.065384] usbcore: registered new device driver usb
[ 28.066426] USB Universal Host Controller Interface driver v3.0
[ 28.066484] ACPI: PCI Interrupt 0000:00:1a.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 28.066499] PCI: Setting latency timer of device 0000:00:1a.0 to 64
[ 28.066503] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[ 28.066643] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
[ 28.066672] uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000ff00
[ 28.066806] usb usb1: configuration #1 chosen from 1 choice
[ 28.066842] hub 1-0:1.0: USB hub found
[ 28.066849] hub 1-0:1.0: 2 ports detected
[ 28.110834] SCSI subsystem initialized
[ 28.117415] libata version 2.21 loaded.
[ 28.168064] ACPI: PCI Interrupt 0000:00:1a.1 -> GSI 21 (level, low) -> IRQ 17
[ 28.168078] PCI: Setting latency timer of device 0000:00:1a.1 to 64
[ 28.168082] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[ 28.168110] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 2
[ 28.168140] uhci_hcd 0000:00:1a.1: irq 17, io base 0x0000fe00
[ 28.168257] usb usb2: configuration #1 chosen from 1 choice
[ 28.168290] hub 2-0:1.0: USB hub found
[ 28.168297] hub 2-0:1.0: 2 ports detected
[ 28.271955] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 18
[ 28.271968] PCI: Setting latency timer of device 0000:00:1d.0 to 64
[ 28.271972] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 28.272002] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 3
[ 28.272031] uhci_hcd 0000:00:1d.0: irq 18, io base 0x0000fd00
[ 28.272156] usb usb3: configuration #1 chosen from 1 choice
[ 28.272189] hub 3-0:1.0: USB hub found
[ 28.272197] hub 3-0:1.0: 2 ports detected
[ 28.375781] ACPI: PCI Interrupt 0000:00:1d.1 -> GSI 19 (level, low) -> IRQ 19
[ 28.375790] PCI: Setting latency timer of device 0000:00:1d.1 to 64
[ 28.375795] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 28.375825] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 4
[ 28.375853] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000fc00
[ 28.375966] usb usb4: configuration #1 chosen from 1 choice
[ 28.375999] hub 4-0:1.0: USB hub found
[ 28.376006] hub 4-0:1.0: 2 ports detected
[ 28.479673] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 20
[ 28.479683] PCI: Setting latency timer of device 0000:00:1d.2 to 64
[ 28.479687] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 28.479718] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 5
[ 28.479746] uhci_hcd 0000:00:1d.2: irq 20, io base 0x0000fb00
[ 28.479863] usb usb5: configuration #1 chosen from 1 choice
[ 28.479896] hub 5-0:1.0: USB hub found
[ 28.479903] hub 5-0:1.0: 2 ports detected
[ 28.511555] usb 2-1: new low speed USB device using uhci_hcd and address 2
[ 28.586677] ata_piix 0000:00:1f.2: version 2.11
[ 28.586684] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
[ 28.586711] ACPI: PCI Interrupt 0000:00:1f.2 -> GSI 19 (level, low) -> IRQ 19
[ 28.586745] PCI: Setting latency timer of device 0000:00:1f.2 to 64
[ 28.586804] scsi0 : ata_piix
[ 28.586853] scsi1 : ata_piix
[ 28.586985] ata1: SATA max UDMA/133 cmd 0x0001fa00 ctl 0x0001f902 bmdma 0x0001f600 irq 19
[ 28.586989] ata2: SATA max UDMA/133 cmd 0x0001f800 ctl 0x0001f702 bmdma 0x0001f608 irq 19
[ 28.688741] usb 2-1: configuration #1 chosen from 1 choice
[ 28.704384] usbcore: registered new interface driver hiddev
[ 28.726672] input: GreenAsia Inc. USB Joystick as /class/input/input2
[ 28.726678] input: USB HID v1.10 Joystick [GreenAsia Inc. USB Joystick ] on usb-0000:00:1a.1-1
[ 28.726692] usbcore: registered new interface driver usbhid
[ 28.726695] /build/buildd/linux-source-2.6.22-2.6.22/drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
[ 28.791607] ata1.00: ATA-7: ST3160812AS 41N3268 LEN, 3.AAK, max UDMA/133
[ 28.791612] ata1.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 28.858165] ata1.00: configured for UDMA/133
[ 29.021840] scsi 0:0:0:0: Direct-Access ATA ST3160812AS 3.AA PQ: 0 ANSI: 5
[ 29.021917] ata_piix 0000:00:1f.5: MAP [ P0 P2 P1 P3 ]
[ 29.021944] ACPI: PCI Interrupt 0000:00:1f.5 -> GSI 19 (level, low) -> IRQ 19
[ 29.021975] PCI: Setting latency timer of device 0000:00:1f.5 to 64
[ 29.022005] scsi2 : ata_piix
[ 29.022053] scsi3 : ata_piix
[ 29.022137] ata3: SATA max UDMA/133 cmd 0x0001f300 ctl 0x0001f202 bmdma 0x0001ef00 irq 19
[ 29.022141] ata4: SATA max UDMA/133 cmd 0x0001f100 ctl 0x0001f002 bmdma 0x0001ef08 irq 19
[ 29.658526] ata4.00: ATAPI: PIONEER DVD-RW DVR-112, 1.15, max UDMA/66
[ 29.658530] ata4.00: applying bridge limits
[ 29.830346] ata4.00: configured for UDMA/66
[ 29.836556] scsi 3:0:0:0: CD-ROM PIONEER DVD-RW DVR-112 1.15 PQ: 0 ANSI: 5
[ 29.836915] r8169 Gigabit Ethernet driver 2.2LK loaded
[ 29.836938] ACPI: PCI Interrupt 0000:02:03.0[A] -> GSI 20 (level, low) -> IRQ 21
[ 29.837866] eth0: RTL8169sc/8110sc at 0xf8814000, 00:f0:4c:8f:a6:d5, XID 18000000 IRQ 21
[ 29.838382] ACPI: PCI Interrupt 0000:00:1a.7[C] -> GSI 18 (level, low) -> IRQ 20
[ 29.838394] PCI: Setting latency timer of device 0000:00:1a.7 to 64
[ 29.838398] ehci_hcd 0000:00:1a.7: EHCI Host Controller
[ 29.838432] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 6
[ 29.838467] PCI: cache line size of 32 is not supported by device 0000:00:1a.7
[ 29.838475] ehci_hcd 0000:00:1a.7: irq 20, io mem 0xfdfff000
[ 29.842344] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[ 29.842453] usb usb6: configuration #1 chosen from 1 choice
[ 29.842492] hub 6-0:1.0: USB hub found
[ 29.842499] hub 6-0:1.0: 4 ports detected
[ 29.844834] sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB)
[ 29.844848] sd 0:0:0:0: [sda] Write Protect is off
[ 29.844852] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 29.844871] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 29.844926] sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB)
[ 29.844939] sd 0:0:0:0: [sda] Write Protect is off
[ 29.844941] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 29.844961] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 29.844966] sda: sda1 sda2 sda3 < sda5 sda6 sda7 >
[ 29.884492] sd 0:0:0:0: [sda] Attached SCSI disk
[ 29.890649] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 29.890678] sr 3:0:0:0: Attached scsi generic sg1 type 5
[ 29.918630] sr0: scsi3-mmc drive: 40x/40x writer dvd-ram cd/rw xa/form2 cdda tray
[ 29.918635] Uniform CD-ROM driver Revision: 3.20
[ 29.918691] sr 3:0:0:0: Attached scsi CD-ROM sr0
[ 29.946201] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 18
[ 29.946215] PCI: Setting latency timer of device 0000:00:1d.7 to 64
[ 29.946220] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 29.946253] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 7
[ 29.946285] PCI: cache line size of 32 is not supported by device 0000:00:1d.7
[ 29.946293] ehci_hcd 0000:00:1d.7: irq 18, io mem 0xfdffe000
[ 29.950204] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[ 29.950306] usb usb7: configuration #1 chosen from 1 choice
[ 29.950342] hub 7-0:1.0: USB hub found
[ 29.950348] hub 7-0:1.0: 6 ports detected
[ 30.129895] usb 2-1: USB disconnect, address 2
[ 30.369615] usb 2-1: new low speed USB device using uhci_hcd and address 3
[ 30.545840] usb 2-1: configuration #1 chosen from 1 choice
[ 30.571778] input: GreenAsia Inc. USB Joystick as /class/input/input3
[ 30.571785] input: USB HID v1.10 Joystick [GreenAsia Inc. USB Joystick ] on usb-0000:00:1a.1-1
[ 31.763685] Attempting manual resume
[ 31.763689] swsusp: Resume From Partition 8:6
[ 31.763692] PM: Checking swsusp image.
[ 31.833900] PM: Resume from disk failed.
[ 31.876327] kjournald starting. Commit interval 5 seconds
[ 31.876334] EXT3-fs: mounted filesystem with ordered data mode.
[ 42.064936] input: PC Speaker as /class/input/input4
[ 42.683750] iTCO_vendor_support: vendor-support=0
[ 42.725859] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.01 (21-Jan-2007)
[ 42.725949] iTCO_wdt: Found a ICH8 or ICH8R TCO device (Version=2, TCOBASE=0x0460)
[ 42.726002] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 42.769007] Linux agpgart interface v0.102 (c) Dave Jones
[ 42.825239] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 42.827051] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 43.138705] usbcore: registered new interface driver xpad
[ 43.138710] /build/buildd/linux-source-2.6.22-2.6.22/drivers/input/joystick/xpad.c: driver for Xbox controllers v0.1.6
[ 43.278521] snd_rawmidi: disagrees about version of symbol snd_info_register
[ 43.278526] snd_rawmidi: Unknown symbol snd_info_register
[ 43.278578] snd_rawmidi: disagrees about version of symbol snd_seq_device_new
[ 43.278581] snd_rawmidi: Unknown symbol snd_seq_device_new
[ 43.278629] snd_rawmidi: disagrees about version of symbol snd_info_free_entry
[ 43.278632] snd_rawmidi: Unknown symbol snd_info_free_entry
[ 43.278682] snd_rawmidi: disagrees about version of symbol snd_unregister_oss_device
[ 43.278685] snd_rawmidi: Unknown symbol snd_unregister_oss_device
[ 43.278738] snd_rawmidi: disagrees about version of symbol snd_register_oss_device
[ 43.278741] snd_rawmidi: Unknown symbol snd_register_oss_device
[ 43.278787] snd_rawmidi: disagrees about version of symbol snd_ctl_register_ioctl
[ 43.278790] snd_rawmidi: Unknown symbol snd_ctl_register_ioctl
[ 43.278828] snd_rawmidi: disagrees about version of symbol snd_card_file_add
[ 43.278831] snd_rawmidi: Unknown symbol snd_card_file_add
[ 43.279033] snd_rawmidi: disagrees about version of symbol snd_unregister_device
[ 43.279036] snd_rawmidi: Unknown symbol snd_unregister_device
[ 43.279090] snd_rawmidi: disagrees about version of symbol snd_device_new
[ 43.279092] snd_rawmidi: Unknown symbol snd_device_new
[ 43.279134] snd_rawmidi: disagrees about version of symbol snd_ctl_unregister_ioctl
[ 43.279137] snd_rawmidi: Unknown symbol snd_ctl_unregister_ioctl
[ 43.279285] snd_rawmidi: disagrees about version of symbol snd_info_create_card_entry
[ 43.279288] snd_rawmidi: Unknown symbol snd_info_create_card_entry
[ 43.279332] snd_rawmidi: disagrees about version of symbol snd_card_file_remove
[ 43.279334] snd_rawmidi: Unknown symbol snd_card_file_remove
[ 43.279375] snd_rawmidi: disagrees about version of symbol snd_register_device_for_dev
[ 43.279378] snd_rawmidi: Unknown symbol snd_register_device_for_dev
[ 43.279420] snd_rawmidi: disagrees about version of symbol snd_device_register
[ 43.279423] snd_rawmidi: Unknown symbol snd_device_register
[ 43.282573] snd_seq_midi: Unknown symbol snd_rawmidi_info_select
[ 43.282698] snd_seq_midi: disagrees about version of symbol snd_seq_kernel_client_dispatch
[ 43.282702] snd_seq_midi: Unknown symbol snd_seq_kernel_client_dispatch
[ 43.282739] snd_seq_midi: disagrees about version of symbol snd_midi_event_encode
[ 43.282741] snd_seq_midi: Unknown symbol snd_midi_event_encode
[ 43.282794] snd_seq_midi: Unknown symbol snd_rawmidi_output_params
[ 43.282832] snd_seq_midi: disagrees about version of symbol snd_seq_dump_var_event
[ 43.282834] snd_seq_midi: Unknown symbol snd_seq_dump_var_event
[ 43.282922] snd_seq_midi: Unknown symbol snd_rawmidi_kernel_read
[ 43.282961] snd_seq_midi: disagrees about version of symbol snd_seq_device_register_driver
[ 43.282964] snd_seq_midi: Unknown symbol snd_seq_device_register_driver
[ 43.283011] snd_seq_midi: Unknown symbol snd_rawmidi_kernel_write
[ 43.283103] snd_seq_midi: Unknown symbol snd_rawmidi_drain_output
[ 43.283259] snd_seq_midi: Unknown symbol snd_rawmidi_input_params
[ 43.283295] snd_seq_midi: disagrees about version of symbol snd_midi_event_decode
[ 43.283298] snd_seq_midi: Unknown symbol snd_midi_event_decode
[ 43.283357] snd_seq_midi: Unknown symbol snd_rawmidi_kernel_open
[ 43.283394] snd_seq_midi: disagrees about version of symbol snd_seq_create_kernel_client
[ 43.283397] snd_seq_midi: Unknown symbol snd_seq_create_kernel_client
[ 43.283448] snd_seq_midi: Unknown symbol snd_rawmidi_kernel_release
[ 43.482096] input: ImPS/2 Logitech Wheel Mouse as /class/input/input5
[ 43.485463] parport_pc 00:07: reported by Plug and Play ACPI
[ 43.485516] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
[ 43.579663] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 22 (level, low) -> IRQ 22
[ 43.579686] PCI: Setting latency timer of device 0000:00:1b.0 to 64
[ 43.609650] hda_codec: Unknown model for ALC660VD/ALC861VD, trying auto-probe from BIOS...
[ 44.263146] lp0: using parport0 (interrupt-driven).
[ 44.309308] Adding 497944k swap on /dev/sda6. Priority:-1 extents:1 across:497944k
[ 45.330302] EXT3 FS on sda2, internal journal
[ 47.180143] kjournald starting. Commit interval 5 seconds
[ 47.180335] EXT3 FS on sda7, internal journal
[ 47.180342] EXT3-fs: mounted filesystem with ordered data mode.
[ 82.686313] No dock devices found.
[ 82.763365] input: Power Button (FF) as /class/input/input6
[ 82.763388] ACPI: Power Button (FF) [PWRF]
[ 82.763441] input: Power Button (CM) as /class/input/input7
[ 82.763459] ACPI: Power Button (CM) [PWRB]
[ 83.988475] Failure registering capabilities with primary security module.
[ 84.175476] ppdev: user-space parallel port driver
[ 84.336474] audit(1216915124.181:3): type=1503 operation="inode_permission" requested_mask="a" denied_mask="a" name="/dev/tty" pid=4860 profile="/usr/sbin/cupsd"
[ 84.382498] apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac)
[ 84.382503] apm: disabled - APM is not SMP safe.
[ 84.411483] r8169: eth0: link up
[ 87.047551] Bluetooth: Core ver 2.11
[ 87.047601] NET: Registered protocol family 31
[ 87.047604] Bluetooth: HCI device and connection manager initialized
[ 87.047607] Bluetooth: HCI socket layer initialized
[ 87.104121] Bluetooth: L2CAP ver 2.8
[ 87.104126] Bluetooth: L2CAP socket layer initialized
[ 87.191222] Bluetooth: RFCOMM socket layer initialized
[ 87.191233] Bluetooth: RFCOMM TTY layer initialized
[ 87.191235] Bluetooth: RFCOMM ver 1.8
[ 90.375003] vmmon: module license 'unspecified' taints kernel.
[ 90.375790] /dev/vmmon[5335]: Module vmmon: registered with major=10 minor=165
[ 90.375845] /dev/vmmon[5335]: Initial HV check: anyNotCapable=1 anyUnlocked=0 anyEnabled=0 anyDisabled=0
[ 90.375849] /dev/vmmon[5335]: Module vmmon: initialized
[ 90.460180] /dev/vmci[5352]: VMCI: Driver initialized.
[ 90.460236] /dev/vmci[5352]: Module vmci: registered with major=10 minor=63
[ 90.460240] /dev/vmci[5352]: Module vmci: initialized
[ 90.512022] vsock: no version for "VMCIDatagram_Send" found: kernel tainted.
[ 90.531181] NET: Registered protocol family 28
[ 90.572832] [fglrx] Maximum main memory to use for locked dma buffers: 1899 MBytes.
[ 90.572933] [fglrx] module loaded - fglrx 8.37.6 [May 25 2007] on minor 0
[ 90.599268] ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 90.949265] /dev/vmnet: open called by PID 5435 (vmnet-bridge)
[ 90.949540] /dev/vmnet: hub 0 does not exist, allocating memory.
[ 90.949802] /dev/vmnet: port on hub 0 successfully opened
[ 90.950043] bridge-eth0: enabling the bridge
[ 90.950277] bridge-eth0: up
[ 90.950457] bridge-eth0: already up
[ 90.950462] bridge-eth0: attached
[ 93.197040] NET: Registered protocol family 17
[ 93.306318] [fglrx] total GART = 130023424
[ 93.306326] [fglrx] free GART = 114032640
[ 93.306329] [fglrx] max single GART = 114032640
[ 93.306332] [fglrx] total LFB = 134086656
[ 93.306334] [fglrx] free LFB = 116256768
[ 93.306337] [fglrx] max single LFB = 116256768
[ 93.306340] [fglrx] total Inv = 134217728
[ 93.306342] [fglrx] free Inv = 134217728
[ 93.306345] [fglrx] max single Inv = 134217728
[ 93.306347] [fglrx] total TIM = 0
[ 98.530091] NET: Registered protocol family 10
[ 98.530327] lo: Disabled Privacy Extensions
[ 102.716105] /dev/vmnet: open called by PID 6031 (vmnet-dhcpd)
[ 102.716262] /dev/vmnet: hub 1 does not exist, allocating memory.
[ 102.716417] /dev/vmnet: port on hub 1 successfully opened
[ 102.787341] /dev/vmnet: open called by PID 6035 (vmnet-netifup)
[ 102.787510] /dev/vmnet: port on hub 1 successfully opened
[ 102.877150] /dev/vmnet: open called by PID 6038 (vmnet-dhcpd)
[ 102.877306] /dev/vmnet: hub 8 does not exist, allocating memory.
[ 102.877461] /dev/vmnet: port on hub 8 successfully opened
[ 102.898947] /dev/vmnet: open called by PID 6040 (vmnet-natd)
[ 102.899107] /dev/vmnet: port on hub 8 successfully opened
[ 102.937113] /dev/vmnet: open called by PID 6044 (vmnet-netifup)
[ 102.937127] /dev/vmnet: port on hub 8 successfully opened
[ 109.243261] eth0: no IPv6 routers present
[ 113.432985] vmnet8: no IPv6 routers present
[ 113.512941] vmnet1: no IPv6 routers present

[cxczqfrx]

没遇到过
关注中....

[BigSnake.NET]

cp 命令的出错贴出来。。

[HuntXu]

估计硬盘坏了...

[eos]

没看出来有什么问题,win下读写正常吗？
感觉硬盘物理上有问题

[eos]

fsck一下试试

[delectate]

先升级到8.04再说……

没遇到过

硬件问题？

不应该啊，否则u根本呢启动不了哦！

试试从光盘拷贝文件到硬盘试试看

[HuntXu]

硬盘坏了ubuntu可以启动的...关键那些没坏就行的...

[delectate]

硬盘坏了ubuntu可以启动的...关键那些没坏就行的...

难道lz每一个分区都是这样子么？

貌似有坏道了

[Einhorn]

郁闷啊，我的第二块硬盘死在了ubuntu手里
之前是一块笔记本的硬盘，现在的优势希捷160G SATA2
在xp下一直都很正常，都是在安装了ubuntu之后3个月内坏的
再说一下现在的情况吧
在ubuntu下不能进行文件复制，图形界面下的错误提示请看一楼图片
命令行下直接就提示input/output error
当错误出现后，我再用win下常用的图形分区工具查看分区信息时该工具已经无法识别，提示分区表损坏
后来作了低格，安装xp一切正常
当再安装ubuntu后没一天就有不行了
想知道下ubuntu对SATA2硬盘能很好的支持吗？
还有就是我的计算机根本不能安装8.04，启动引导时会提示错误

[delectate]

昨天晚上我也遇到类似问题了

u盘无法读取，拷贝，后来好不容易拷贝进去数据了，到另一台xp上，竟然没有任何数据

把dvd盘拿出来，拷数据，提示读取写入错误

晕！

一会我再试试看吧！

估计不是硬盘的问题（刚买的dell，不会这么快就报废吧！）

[2ine]

很诡异

[delectate]

晕

看来是mount的问题

我这里也遇到了

晕

试图解决