我的配置文件
#
# /etc/rc.conf - Main Configuration for Arch Linux
#
# -----------------------------------------------------------------------
# LOCALIZATION
# -----------------------------------------------------------------------
#
# LOCALE: available languages can be listed with the 'locale -a' command
# HARDWARECLOCK: set to "UTC" or "localtime"
# USEDIRECTISA: use direct I/O requests instead of /dev/rtc for hwclock
# TIMEZONE: timezones are found in /usr/share/zoneinfo
# KEYMAP: keymaps are found in /usr/share/kbd/keymaps
# CONSOLEFONT: found in /usr/share/kbd/consolefonts (only needed for non-US)
# CONSOLEMAP: found in /usr/share/kbd/consoletrans
# USECOLOR: use ANSI color sequences in startup messages
#
LOCALE="en_US.utf8"
HARDWARECLOCK="localtime"
USEDIRECTISA="no"
TIMEZONE="Canada/Pacific"
KEYMAP="us"
CONSOLEFONT=
CONSOLEMAP=
USECOLOR="yes"
# -----------------------------------------------------------------------
# HARDWARE
# -----------------------------------------------------------------------
#
# MOD_AUTOLOAD: Allow autoloading of modules at boot and when needed
# MOD_BLACKLIST: Prevent udev from loading these modules
# MODULES: Modules to load at boot-up. Prefix with a ! to blacklist.
#
# NOTE: Use of 'MOD_BLACKLIST' is deprecated. Please use ! in the MODULES array.
#
MOD_AUTOLOAD="yes"
#MOD_BLACKLIST=() #deprecated
MODULES=(!usbhid !appletouch acpi_cpufreq cpufreq_conservative ndiswrapper sky2 !snd-mixer-oss !snd-pcm-oss !snd-hwdep !snd-page-alloc !snd-pcm !snd-timer !snd snd-hda-intel snd-pcm-oss soundcore)
# Scan for LVM volume groups at startup, required if you use LVM
USELVM="no"
# -----------------------------------------------------------------------
# NETWORKING
# -----------------------------------------------------------------------
#
# HOSTNAME: Hostname of machine. Should also be put in /etc/hosts
#
HOSTNAME="myhost"
# Use 'ifconfig -a' or 'ls /sys/class/net/' to see all available interfaces.
#
# Interfaces to start at boot-up (in this order)
# Declare each interface then list in INTERFACES
# - prefix an entry in INTERFACES with a ! to disable it
# - no hyphens in your interface names - Bash doesn't like it
#
# DHCP: Set your interface to "dhcp" (eth0="dhcp")
# Wireless: See network profiles below
#
eth0="eth0 192.168.0.10 netmask 255.255.255.0 broadcast 192.168.0.255"
INTERFACES=(eth0)
#lo="lo 127.0.0.1"
#BRIDGE_INTERFACES=(br0)
#bridge_br0=(eth0)
#br0="dhcp"
#eth0="eth0 0.0.0.0 promisc"
#INTERFACES=(lo br0 eth0)
# Routes to start at boot-up (in this order)
# Declare each route then list in ROUTES
# - prefix an entry in ROUTES with a ! to disable it
#
gateway="default gw 192.168.0.1"
ROUTES=(!gateway)
# Enable these network profiles at boot-up. These are only useful
# if you happen to need multiple network configurations (ie, laptop users)
# - set to 'menu' to present a menu during boot-up (dialog package required)
# - prefix an entry with a ! to disable it
#
# Network profiles are found in /etc/network.d
#
# This now requires the netcfg package
#
#NETWORKS=(main)
# -----------------------------------------------------------------------
# DAEMONS
# -----------------------------------------------------------------------
#
# Daemons to start at boot-up (in this order)
# - prefix a daemon with a ! to disable it
# - prefix a daemon with a @ to start it up in the background
#
DAEMONS=(syslog-ng network netfs crond 囗囗囗囗囗囗囗 alsa hal fam sensors vmware pommed)
我的Arch For Macbook
-
Mr.J
- 帖子： 204
- 注册时间： 2008-07-14 16:58
-
Mr.J
- 帖子： 204
- 注册时间： 2008-07-14 16:58
#!/bin/bash
#
# /etc/rc.local: Local multi-user startup script.
#
# Frequency Scaling
cpufreq-set -c 0 -g conservative
cpufreq-set -c 1 -g conservative
# For appletouch
/sbin/modprobe appletouch
sleep 5
/sbin/modprobe usbhid
# Start vboxdrv
# If you do not wish this to be executed here then comment it out,
# and the installer will skip it next time.
if [ -x /etc/rc.d/rc.vboxdrv ]; then
/etc/rc.d/rc.vboxdrv start
fi
# Start vboxnet
# If you do not wish this to be executed here then comment it out,
# and the installer will skip it next time.
if [ -x /etc/rc.d/rc.vboxnet ]; then
/etc/rc.d/rc.vboxnet start
fi
#
# /etc/rc.local: Local multi-user startup script.
#
# Frequency Scaling
cpufreq-set -c 0 -g conservative
cpufreq-set -c 1 -g conservative
# For appletouch
/sbin/modprobe appletouch
sleep 5
/sbin/modprobe usbhid
# Start vboxdrv
# If you do not wish this to be executed here then comment it out,
# and the installer will skip it next time.
if [ -x /etc/rc.d/rc.vboxdrv ]; then
/etc/rc.d/rc.vboxdrv start
fi
# Start vboxnet
# If you do not wish this to be executed here then comment it out,
# and the installer will skip it next time.
if [ -x /etc/rc.d/rc.vboxnet ]; then
/etc/rc.d/rc.vboxnet start
fi
-
Mr.J
- 帖子： 204
- 注册时间： 2008-07-14 16:58
#
# Configuration file for pommed
#
# General configuration
general {
# fnmode: functions keys first (no need to use fn) or last
# Value is either 1 or 2, effect is hardware-dependent
fnmode = 2
}
# ATI X1600 backlight control (MacBook Pro v1 & v2)
lcd_x1600 {
# initial backlight level [200] (0 - 255, -1 to disable)
init = -1
# step value (1 - 127)
step = 10
# backlight level when on battery [80] (1 - 255, 0 to disable)
on_batt = 80
}
# Intel 945GM, 965GM backlight control (MacBook, MacBook Air)
lcd_gma950 {
# initial backlight level [0x6f] (0x1f - 0x94 usually, -1 to disable)
init = -1
# step value (0x01 - 0x20)
step = 0x0f
# backlight level when on battery [0x40] (0x1f - 0x94 usually, 0 to disable)
on_batt = 0x40
}
# nVidia GeForce 8600M GT backlight control (MacBook Pro v3 & v4)
lcd_nv8600mgt {
# initial backlight level [12] (0 - 15, -1 to disable)
init = -1
# step value (1 - 2)
step = 1
# backlight level when on battery [6] (1 - 15, 0 to disable)
on_batt = 6
}
# Audio support
audio {
# Use amixer or alsamixer/alsamixergui to determine the sound card
# and the mixer elements to use here.
# sound card to use
card = "default"
# initial volume [80] (0 - 100%, -1 to disable)
init = -1
# step value (1 - 50%)
step = 10
# beep on volume change
beep = yes
# mixer element for volume adjustment
volume = "Master"
# mixer element for muting the speakers
speakers = "Master"
# mixer element for muting the headphones
headphones = "Headphone"
}
# Keyboard backlight control
kbd {
# default value for automatic backlight (0 - 255)
default = 100
# step value (1 - 127)
step = 10
# ambient light thresholds for automatic backlight (0 - 255)
on_threshold = 20
off_threshold = 40
# enable/disable automatic backlight
auto = yes
# idle timer - switches off keyboard backlight automatically (timeout in seconds, -1 to disable)
idle_timer = 60
}
# CD/DVD drive ejection
eject {
# enable/disable eject key
enabled = yes
# CD/DVD device
device = "/dev/dvd"
}
# Beeper
beep {
# enable/disable beeper
enabled = yes
# WAV file to use (from pommed: goutte.wav or click.wav in /usr/share/pommed)
beepfile = "/usr/share/pommed/goutte.wav"
}
# Apple Remote - deprecated
# Note: the appleir driver is required for this to work; this driver has been
# obsoleted with Linux 2.6.22, so unless you are running a kernel < 2.6.22 or
# use the appleir driver on a newer kernel, this won't work.
# You should use LIRC instead.
appleir {
# enable/disable the appleir support
enabled = no
}
# Configuration file for pommed
#
# General configuration
general {
# fnmode: functions keys first (no need to use fn) or last
# Value is either 1 or 2, effect is hardware-dependent
fnmode = 2
}
# ATI X1600 backlight control (MacBook Pro v1 & v2)
lcd_x1600 {
# initial backlight level [200] (0 - 255, -1 to disable)
init = -1
# step value (1 - 127)
step = 10
# backlight level when on battery [80] (1 - 255, 0 to disable)
on_batt = 80
}
# Intel 945GM, 965GM backlight control (MacBook, MacBook Air)
lcd_gma950 {
# initial backlight level [0x6f] (0x1f - 0x94 usually, -1 to disable)
init = -1
# step value (0x01 - 0x20)
step = 0x0f
# backlight level when on battery [0x40] (0x1f - 0x94 usually, 0 to disable)
on_batt = 0x40
}
# nVidia GeForce 8600M GT backlight control (MacBook Pro v3 & v4)
lcd_nv8600mgt {
# initial backlight level [12] (0 - 15, -1 to disable)
init = -1
# step value (1 - 2)
step = 1
# backlight level when on battery [6] (1 - 15, 0 to disable)
on_batt = 6
}
# Audio support
audio {
# Use amixer or alsamixer/alsamixergui to determine the sound card
# and the mixer elements to use here.
# sound card to use
card = "default"
# initial volume [80] (0 - 100%, -1 to disable)
init = -1
# step value (1 - 50%)
step = 10
# beep on volume change
beep = yes
# mixer element for volume adjustment
volume = "Master"
# mixer element for muting the speakers
speakers = "Master"
# mixer element for muting the headphones
headphones = "Headphone"
}
# Keyboard backlight control
kbd {
# default value for automatic backlight (0 - 255)
default = 100
# step value (1 - 127)
step = 10
# ambient light thresholds for automatic backlight (0 - 255)
on_threshold = 20
off_threshold = 40
# enable/disable automatic backlight
auto = yes
# idle timer - switches off keyboard backlight automatically (timeout in seconds, -1 to disable)
idle_timer = 60
}
# CD/DVD drive ejection
eject {
# enable/disable eject key
enabled = yes
# CD/DVD device
device = "/dev/dvd"
}
# Beeper
beep {
# enable/disable beeper
enabled = yes
# WAV file to use (from pommed: goutte.wav or click.wav in /usr/share/pommed)
beepfile = "/usr/share/pommed/goutte.wav"
}
# Apple Remote - deprecated
# Note: the appleir driver is required for this to work; this driver has been
# obsoleted with Linux 2.6.22, so unless you are running a kernel < 2.6.22 or
# use the appleir driver on a newer kernel, this won't work.
# You should use LIRC instead.
appleir {
# enable/disable the appleir support
enabled = no
}
-
Mr.J
- 帖子： 204
- 注册时间： 2008-07-14 16:58
# set to yes if you want Conky to be forked in the background
background no
cpu_avg_samples 2
net_avg_samples 2
out_to_console no
# X font when Xft is disabled, you can pick one with program xfontsel
#font 7x12
#font 6x10
#font 7x13
#font 8x13
#font 7x12
#font *mintsmild.se*
#font -*-*-*-*-*-*-34-*-*-*-*-*-*-*
#font -artwiz-snap-normal-r-normal-*-*-100-*-*-p-*-iso8859-1
# Use Xft?
use_xft yes
# Xft font when Xft is enabled
xftfont Bitstream Vera Sans Mono:size=8
own_window_transparent yes
#own_window_colour blue
own_window_type root
# Text alpha when using Xft
xftalpha 0.8
#on_bottom yes
# mail spool
mail_spool $MAIL
# Update interval in seconds
update_interval 1
# Create own window instead of using desktop (required in nautilus)
own_window yes
# Use double buffering (reduces flicker, may not work for everyone)
double_buffer yes
# Minimum size of text area
#minimum_size 280 5
#maximum_width 150
# Draw shades?
draw_shades no
# Draw outlines?
draw_outline no
# Draw borders around text
draw_borders no
# Stippled borders?
stippled_borders 10
# border margins
border_margin 4
# border width
border_width 1
# Default colors and also border colors
default_color white
default_shade_color white
default_outline_color white
# Text alignment, other possible values are commented
#alignment top_left
#minimum_size 10 10
gap_x 10
gap_y 10
#alignment top_right
alignment bottom_left
#alignment bottom_right
# Gap between borders of screen and text
# Add spaces to keep things from moving about? This only affects certain objects.
use_spacer none
# Subtract file system buffers from used memory?
no_buffers yes
# set to yes if you want all text to be in uppercase
uppercase no
# boinc (seti) dir
# seti_dir /opt/seti
# Possible variables to be used:
#
# Variable Arguments Description
# acpiacadapter ACPI ac adapter state.
# acpifan ACPI fan state
# acpitemp ACPI temperature.
# adt746xcpu CPU temperature from therm_adt746x
# adt746xfan Fan speed from therm_adt746x
# battery (num) Remaining capasity in ACPI or APM
# battery. ACPI battery number can be
# given as argument (default is BAT0).
# buffers Amount of memory buffered
# cached Amount of memory cached
# color (color) Change drawing color to color
# cpu CPU usage in percents
# cpubar (height) Bar that shows CPU usage, height is
# bar's height in pixels
# downspeed net Download speed in kilobytes
# downspeedf net Download speed in kilobytes with one
# decimal
# exec shell command Executes a shell command and displays
# the output in torsmo. warning: this
# takes a lot more resources than other
# variables. I'd recommend coding wanted
# behaviour in C and posting a patch
.
# execi interval, shell Same as exec but with specific interval.
# command Interval can't be less than
# update_interval in configuration.
# fs_bar (height), (fs) Bar that shows how much space is used on
# a file system. height is the height in
# pixels. fs is any file on that file
# system.
# fs_free (fs) Free space on a file system available
# for users.
# fs_free_perc (fs) Free percentage of space on a file
# system available for users.
# fs_size (fs) File system size
# fs_used (fs) File system used space
# hr (height) Horizontal line, height is the height in
# pixels
# i2c (dev), type, n I2C sensor from sysfs (Linux 2.6). dev
# may be omitted if you have only one I2C
# device. type is either in (or vol)
# meaning voltage, fan meaning fan or temp
# meaning temperature. n is number of the
# sensor. See /sys/bus/i2c/devices/ on
# your local computer.
# kernel Kernel version
# loadavg (1), (2), (3) System load average, 1 is for past 1
# minute, 2 for past 5 minutes and 3 for
# past 15 minutes.
# machine Machine, i686 for example
# mails Mail count in mail spool. You can use
# program like fetchmail to get mails from
# some server using your favourite
# protocol. See also new_mails.
# mem Amount of memory in use
# membar (height) Bar that shows amount of memory in use
# memmax Total amount of memory
# memperc Percentage of memory in use
# new_mails Unread mail count in mail spool.
# nodename Hostname
# outlinecolor (color) Change outline color
# pre_exec shell command Executes a shell command one time before
# torsmo displays anything and puts output
# as text.
# processes Total processes (sleeping and running)
# running_processes Running processes (not sleeping),
# requires Linux 2.6
# shadecolor (color) Change shading color
# stippled_hr (space), Stippled (dashed) horizontal line
# (height)
# swapbar (height) Bar that shows amount of swap in use
# swap Amount of swap in use
# swapmax Total amount of swap
# swapperc Percentage of swap in use
# sysname System name, Linux for example
# time (format) Local time, see man strftime to get more
# information about format
# totaldown net Total download, overflows at 4 GB on
# Linux with 32-bit arch and there doesn't
# seem to be a way to know how many times
# it has already done that before torsmo
# has started.
# totalup net Total upload, this one too, may overflow
# updates Number of updates (for debugging)
# upspeed net Upload speed in kilobytes
# upspeedf net Upload speed in kilobytes with one
# decimal
# uptime Uptime
# uptime_short Uptime in a shorter format
#
# seti_prog Seti@home current progress
# seti_progbar (height) Seti@home current progress bar
# seti_credit Seti@hoome total user credit
# variable is given either in format $variable or in ${variable}. Latter
# allows characters right after the variable and must be used in network
# stuff because of an argument
#${font Dungeon:style=Bold:pixelsize=10}I can change the font as well
#${font Verdana:size=10}as many times as I choose
#${font Perry:size=10}Including UTF-8,
#${font Luxi Mono:size=10}justo como este texto que o google traduz fêz o português
# stuff after 'TEXT' will be formatted on screen
#${font Grunge:size=12}${time %a %b %d}${alignr -25}${time %k:%M}
TEXT
$nodename - $sysname $kernel on $machine
$stippled_hr
${color lightgrey}Uptime:$color $uptime ${color lightgrey}- Load:$color $loadavg
${color lightgrey}CPU Usage:${color #5000a0} ${cpu}% ${cpubar}
${color black}${cpugraph 000000 5000a0}
${color lightgrey}RAM Usage:$color $mem/$memmax - $memperc% $membar
${color lightgrey}Swap Usage:$color $swap/$swapmax - $swapperc% ${swapbar}
${color lightgrey}Processes:$color $processes ${color grey}Running:$color $running_processes
$color$stippled_hr
${color lightgrey}Networking:
Down:${color #8844ee} ${downspeed wlan0} k/s${color lightgrey} ${offset 70}Up:${color #22ccff} ${upspeed wlan0} k/s
${color black}${downspeedgraph wlan0 32,150 ff0000 0000ff} $alignr${color black}${upspeedgraph wlan0 32,150 0000ff ff0000}
${color lightgrey}File systems:
/ $color${fs_used /}/${fs_size /} ${fs_bar /}
${color lightgrey}Temperatures:
CPU:$color ${hwmon 0 temp 1}C${color grey} - MB:$color ${hwmon 1 temp 1}C
${font Dungeon:style=Bold:pixelsize=12}${color #88aadd}MPD: ${alignc}$mpd_artist - $mpd_title
${color #88aadd}$mpd_bar
${color #88aadd}${alignc}$mpd_status
${color}Name PID CPU% MEM%
${color #ddaa00} ${top name 1} ${top pid 1} ${top cpu 1} ${top mem 1}
${color lightgrey} ${top name 2} ${top pid 2} ${top cpu 2} ${top mem 2}
${color lightgrey} ${top name 3} ${top pid 3} ${top cpu 3} ${top mem 3}
${color}Mem usage
${color #ddaa00} ${top_mem name 1} ${top_mem pid 1} ${top_mem cpu 1} ${top_mem mem 1}
${color lightgrey} ${top_mem name 2} ${top_mem pid 2} ${top_mem cpu 2} ${top_mem mem 2}
${color lightgrey} ${top_mem name 3} ${top_mem pid 3} ${top_mem cpu 3} ${top_mem mem 3}
background no
cpu_avg_samples 2
net_avg_samples 2
out_to_console no
# X font when Xft is disabled, you can pick one with program xfontsel
#font 7x12
#font 6x10
#font 7x13
#font 8x13
#font 7x12
#font *mintsmild.se*
#font -*-*-*-*-*-*-34-*-*-*-*-*-*-*
#font -artwiz-snap-normal-r-normal-*-*-100-*-*-p-*-iso8859-1
# Use Xft?
use_xft yes
# Xft font when Xft is enabled
xftfont Bitstream Vera Sans Mono:size=8
own_window_transparent yes
#own_window_colour blue
own_window_type root
# Text alpha when using Xft
xftalpha 0.8
#on_bottom yes
# mail spool
mail_spool $MAIL
# Update interval in seconds
update_interval 1
# Create own window instead of using desktop (required in nautilus)
own_window yes
# Use double buffering (reduces flicker, may not work for everyone)
double_buffer yes
# Minimum size of text area
#minimum_size 280 5
#maximum_width 150
# Draw shades?
draw_shades no
# Draw outlines?
draw_outline no
# Draw borders around text
draw_borders no
# Stippled borders?
stippled_borders 10
# border margins
border_margin 4
# border width
border_width 1
# Default colors and also border colors
default_color white
default_shade_color white
default_outline_color white
# Text alignment, other possible values are commented
#alignment top_left
#minimum_size 10 10
gap_x 10
gap_y 10
#alignment top_right
alignment bottom_left
#alignment bottom_right
# Gap between borders of screen and text
# Add spaces to keep things from moving about? This only affects certain objects.
use_spacer none
# Subtract file system buffers from used memory?
no_buffers yes
# set to yes if you want all text to be in uppercase
uppercase no
# boinc (seti) dir
# seti_dir /opt/seti
# Possible variables to be used:
#
# Variable Arguments Description
# acpiacadapter ACPI ac adapter state.
# acpifan ACPI fan state
# acpitemp ACPI temperature.
# adt746xcpu CPU temperature from therm_adt746x
# adt746xfan Fan speed from therm_adt746x
# battery (num) Remaining capasity in ACPI or APM
# battery. ACPI battery number can be
# given as argument (default is BAT0).
# buffers Amount of memory buffered
# cached Amount of memory cached
# color (color) Change drawing color to color
# cpu CPU usage in percents
# cpubar (height) Bar that shows CPU usage, height is
# bar's height in pixels
# downspeed net Download speed in kilobytes
# downspeedf net Download speed in kilobytes with one
# decimal
# exec shell command Executes a shell command and displays
# the output in torsmo. warning: this
# takes a lot more resources than other
# variables. I'd recommend coding wanted
# behaviour in C and posting a patch
. # execi interval, shell Same as exec but with specific interval.
# command Interval can't be less than
# update_interval in configuration.
# fs_bar (height), (fs) Bar that shows how much space is used on
# a file system. height is the height in
# pixels. fs is any file on that file
# system.
# fs_free (fs) Free space on a file system available
# for users.
# fs_free_perc (fs) Free percentage of space on a file
# system available for users.
# fs_size (fs) File system size
# fs_used (fs) File system used space
# hr (height) Horizontal line, height is the height in
# pixels
# i2c (dev), type, n I2C sensor from sysfs (Linux 2.6). dev
# may be omitted if you have only one I2C
# device. type is either in (or vol)
# meaning voltage, fan meaning fan or temp
# meaning temperature. n is number of the
# sensor. See /sys/bus/i2c/devices/ on
# your local computer.
# kernel Kernel version
# loadavg (1), (2), (3) System load average, 1 is for past 1
# minute, 2 for past 5 minutes and 3 for
# past 15 minutes.
# machine Machine, i686 for example
# mails Mail count in mail spool. You can use
# program like fetchmail to get mails from
# some server using your favourite
# protocol. See also new_mails.
# mem Amount of memory in use
# membar (height) Bar that shows amount of memory in use
# memmax Total amount of memory
# memperc Percentage of memory in use
# new_mails Unread mail count in mail spool.
# nodename Hostname
# outlinecolor (color) Change outline color
# pre_exec shell command Executes a shell command one time before
# torsmo displays anything and puts output
# as text.
# processes Total processes (sleeping and running)
# running_processes Running processes (not sleeping),
# requires Linux 2.6
# shadecolor (color) Change shading color
# stippled_hr (space), Stippled (dashed) horizontal line
# (height)
# swapbar (height) Bar that shows amount of swap in use
# swap Amount of swap in use
# swapmax Total amount of swap
# swapperc Percentage of swap in use
# sysname System name, Linux for example
# time (format) Local time, see man strftime to get more
# information about format
# totaldown net Total download, overflows at 4 GB on
# Linux with 32-bit arch and there doesn't
# seem to be a way to know how many times
# it has already done that before torsmo
# has started.
# totalup net Total upload, this one too, may overflow
# updates Number of updates (for debugging)
# upspeed net Upload speed in kilobytes
# upspeedf net Upload speed in kilobytes with one
# decimal
# uptime Uptime
# uptime_short Uptime in a shorter format
#
# seti_prog Seti@home current progress
# seti_progbar (height) Seti@home current progress bar
# seti_credit Seti@hoome total user credit
# variable is given either in format $variable or in ${variable}. Latter
# allows characters right after the variable and must be used in network
# stuff because of an argument
#${font Dungeon:style=Bold:pixelsize=10}I can change the font as well
#${font Verdana:size=10}as many times as I choose
#${font Perry:size=10}Including UTF-8,
#${font Luxi Mono:size=10}justo como este texto que o google traduz fêz o português
# stuff after 'TEXT' will be formatted on screen
#${font Grunge:size=12}${time %a %b %d}${alignr -25}${time %k:%M}
TEXT
$nodename - $sysname $kernel on $machine
$stippled_hr
${color lightgrey}Uptime:$color $uptime ${color lightgrey}- Load:$color $loadavg
${color lightgrey}CPU Usage:${color #5000a0} ${cpu}% ${cpubar}
${color black}${cpugraph 000000 5000a0}
${color lightgrey}RAM Usage:$color $mem/$memmax - $memperc% $membar
${color lightgrey}Swap Usage:$color $swap/$swapmax - $swapperc% ${swapbar}
${color lightgrey}Processes:$color $processes ${color grey}Running:$color $running_processes
$color$stippled_hr
${color lightgrey}Networking:
Down:${color #8844ee} ${downspeed wlan0} k/s${color lightgrey} ${offset 70}Up:${color #22ccff} ${upspeed wlan0} k/s
${color black}${downspeedgraph wlan0 32,150 ff0000 0000ff} $alignr${color black}${upspeedgraph wlan0 32,150 0000ff ff0000}
${color lightgrey}File systems:
/ $color${fs_used /}/${fs_size /} ${fs_bar /}
${color lightgrey}Temperatures:
CPU:$color ${hwmon 0 temp 1}C${color grey} - MB:$color ${hwmon 1 temp 1}C
${font Dungeon:style=Bold:pixelsize=12}${color #88aadd}MPD: ${alignc}$mpd_artist - $mpd_title
${color #88aadd}$mpd_bar
${color #88aadd}${alignc}$mpd_status
${color}Name PID CPU% MEM%
${color #ddaa00} ${top name 1} ${top pid 1} ${top cpu 1} ${top mem 1}
${color lightgrey} ${top name 2} ${top pid 2} ${top cpu 2} ${top mem 2}
${color lightgrey} ${top name 3} ${top pid 3} ${top cpu 3} ${top mem 3}
${color}Mem usage
${color #ddaa00} ${top_mem name 1} ${top_mem pid 1} ${top_mem cpu 1} ${top_mem mem 1}
${color lightgrey} ${top_mem name 2} ${top_mem pid 2} ${top_mem cpu 2} ${top_mem mem 2}
${color lightgrey} ${top_mem name 3} ${top_mem pid 3} ${top_mem cpu 3} ${top_mem mem 3}
-
Mr.J
- 帖子： 204
- 注册时间： 2008-07-14 16:58
Section "ServerLayout"
Identifier "X.org Configured"
Screen 0 "Screen0" 0 0
InputDevice "Mouse0" #"CorePointer"
InputDevice "Keyboard0" #"CoreKeyboard"
InputDevice "Synaptics Touchpad" #"CorePointer"
Option "AIGLX" "true"
EndSection
Section "Files"
RgbPath "/usr/share/X11/rgb"
ModulePath "/usr/lib/xorg/modules"
FontPath "/usr/share/fonts/wenquanyi/wqy-zenhei/"
# FontPath "/usr/share/fonts/wenquanyi/wqy-bitmapfont-gb18030/"
# FontPath "/usr/share/fonts/misc"
# FontPath "/usr/share/fonts/100dpi:unscaled"
# FontPath "/usr/share/fonts/75dpi:unscaled"
FontPath "/usr/share/fonts/TTF"
# FontPath "/usr/share/fonts/Type1"
EndSection
Section "Module"
Load "glx"
# Load "GLcore"
Load "record"
Load "dbe"
Load "xtrap"
Load "extmod"
Load "dri"
Load "freetype"
Load "synaptics"
EndSection
Section "Extensions"
Option "Composite" "Enable"
EndSection
#Section "InputDevice"
# Identifier "Keyboard0"
# Driver "keyboard"
# Option "CoreKeyboard"
# Option "XkbRules" "xorg"
# #Option "XkbModel" "pc105"
# Option "XkbLayout" "us"
# Option "XkbVariant" "intl"
#EndSection
Section "InputDevice"
Identifier "Keyboard0"
Driver "kbd"
EndSection
Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/input/mice"
Option "ZAxisMapping" "4 5 6 7"
EndSection
Section "InputDevice"
# updated 2007-12-07
# use command "synclient -m 1" to see raw output
# common stuff
Identifier "Synaptics Touchpad"
Driver "synaptics"
Option "CorePointer"
Option "Device" "/dev/input/mouse0"
Option "Protocol" "auto-dev"
# not using edge scrolling
Option "HorizEdgeScroll" "0"
Option "VertEdgeScroll" "0"
# use two finger scrolling
Option "VertTwoFingerScroll" "0"
Option "HorizTwoFingerScroll" "0" # set to 0 if you don't want horizontal scrolling
# scroll speed, lower is faster
Option "HorizScrollDelta" "15"
Option "VertScrollDelta" "15"
# minimum pressure motion factor
Option "PressureMotionMinZ" "10"
# touch and untouch thresholds, higher numbers if you like to push hard
Option "FingerLow" "10"
Option "FingerHigh" "20" # change to 30 or 40 if you like
# borders based on output from synclient
Option "LeftEdge" "20"
Option "RightEdge" "1200"
Option "TopEdge" "20"
Option "BottomEdge" "370"
# speeds, smaller number for a slower mouse
Option "MinSpeed" "1" # 0.5 is very slow, 1.5 is very fast
Option "MaxSpeed" "1.4" # up to 1.5 works ok
Option "AccelFactor" "0.10"
# tap times, change to suit your tapping habits
#Option "MaxTapMove" "100"
#Option "MaxTapTime" "100"
#Option "MaxDoubleTapTime" "200"
# don't change these or two finger tap stops working
#Option "TapButton2" "3"
#Option "TapButton3" "2"
# must be commented out or normal tapping wont work
#Option "TapButton1" "0"
#Tapping the top right-hand corner will trigger a right click
#Option "RTCornerButton" "3"
#An ordinary tap will not trigger a click
Option "TapButton1" "0"
Option "TapButton2" "0"
Option "TapButton3" "0"
# needed for disabled while typing fix
Option "SHMConfig" "on"
EndSection
Section "Monitor"
#DisplaySize 290 180 # mm
Identifier "Monitor0"
VendorName "APP"
ModelName "Color LCD"
Option "DPMS"
EndSection
Section "Device"
Identifier "Card0"
### Available Driver options are:-
### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
### <string>: "String", <freq>: "<f> Hz/kHz/MHz"
### [arg]: arg optional
#Option "NoAccel" # [<bool>]
#Option "SWcursor" # [<bool>]
#Option "ColorKey" # <i>
#Option "CacheLines" # <i>
#Option "Dac6Bit" # [<bool>]
Option "DRI" "true" # [<bool>]
#Option "NoDDC" # [<bool>]
#Option "ShowCache" # [<bool>]
#Option "XvMCSurfaces" # <i>
#Option "PageFlip" # [<bool>]
Option "XAANoOffscreenPixmaps" "true"
#
Driver "intel"
VendorName "Intel Corporation"
BoardName "Mobile GM965/GL960 Integrated Graphics Controller"
BusID "PCI:0:2:0"
EndSection
Section "DRI"
Mode 0666
EndSection
Section "Screen"
Identifier "Screen0"
Device "Card0"
Monitor "Monitor0"
SubSection "Display"
Viewport 0 0
Depth 1
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 4
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 8
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 15
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 16
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 24
EndSubSection
EndSection
Identifier "X.org Configured"
Screen 0 "Screen0" 0 0
InputDevice "Mouse0" #"CorePointer"
InputDevice "Keyboard0" #"CoreKeyboard"
InputDevice "Synaptics Touchpad" #"CorePointer"
Option "AIGLX" "true"
EndSection
Section "Files"
RgbPath "/usr/share/X11/rgb"
ModulePath "/usr/lib/xorg/modules"
FontPath "/usr/share/fonts/wenquanyi/wqy-zenhei/"
# FontPath "/usr/share/fonts/wenquanyi/wqy-bitmapfont-gb18030/"
# FontPath "/usr/share/fonts/misc"
# FontPath "/usr/share/fonts/100dpi:unscaled"
# FontPath "/usr/share/fonts/75dpi:unscaled"
FontPath "/usr/share/fonts/TTF"
# FontPath "/usr/share/fonts/Type1"
EndSection
Section "Module"
Load "glx"
# Load "GLcore"
Load "record"
Load "dbe"
Load "xtrap"
Load "extmod"
Load "dri"
Load "freetype"
Load "synaptics"
EndSection
Section "Extensions"
Option "Composite" "Enable"
EndSection
#Section "InputDevice"
# Identifier "Keyboard0"
# Driver "keyboard"
# Option "CoreKeyboard"
# Option "XkbRules" "xorg"
# #Option "XkbModel" "pc105"
# Option "XkbLayout" "us"
# Option "XkbVariant" "intl"
#EndSection
Section "InputDevice"
Identifier "Keyboard0"
Driver "kbd"
EndSection
Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/input/mice"
Option "ZAxisMapping" "4 5 6 7"
EndSection
Section "InputDevice"
# updated 2007-12-07
# use command "synclient -m 1" to see raw output
# common stuff
Identifier "Synaptics Touchpad"
Driver "synaptics"
Option "CorePointer"
Option "Device" "/dev/input/mouse0"
Option "Protocol" "auto-dev"
# not using edge scrolling
Option "HorizEdgeScroll" "0"
Option "VertEdgeScroll" "0"
# use two finger scrolling
Option "VertTwoFingerScroll" "0"
Option "HorizTwoFingerScroll" "0" # set to 0 if you don't want horizontal scrolling
# scroll speed, lower is faster
Option "HorizScrollDelta" "15"
Option "VertScrollDelta" "15"
# minimum pressure motion factor
Option "PressureMotionMinZ" "10"
# touch and untouch thresholds, higher numbers if you like to push hard
Option "FingerLow" "10"
Option "FingerHigh" "20" # change to 30 or 40 if you like
# borders based on output from synclient
Option "LeftEdge" "20"
Option "RightEdge" "1200"
Option "TopEdge" "20"
Option "BottomEdge" "370"
# speeds, smaller number for a slower mouse
Option "MinSpeed" "1" # 0.5 is very slow, 1.5 is very fast
Option "MaxSpeed" "1.4" # up to 1.5 works ok
Option "AccelFactor" "0.10"
# tap times, change to suit your tapping habits
#Option "MaxTapMove" "100"
#Option "MaxTapTime" "100"
#Option "MaxDoubleTapTime" "200"
# don't change these or two finger tap stops working
#Option "TapButton2" "3"
#Option "TapButton3" "2"
# must be commented out or normal tapping wont work
#Option "TapButton1" "0"
#Tapping the top right-hand corner will trigger a right click
#Option "RTCornerButton" "3"
#An ordinary tap will not trigger a click
Option "TapButton1" "0"
Option "TapButton2" "0"
Option "TapButton3" "0"
# needed for disabled while typing fix
Option "SHMConfig" "on"
EndSection
Section "Monitor"
#DisplaySize 290 180 # mm
Identifier "Monitor0"
VendorName "APP"
ModelName "Color LCD"
Option "DPMS"
EndSection
Section "Device"
Identifier "Card0"
### Available Driver options are:-
### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
### <string>: "String", <freq>: "<f> Hz/kHz/MHz"
### [arg]: arg optional
#Option "NoAccel" # [<bool>]
#Option "SWcursor" # [<bool>]
#Option "ColorKey" # <i>
#Option "CacheLines" # <i>
#Option "Dac6Bit" # [<bool>]
Option "DRI" "true" # [<bool>]
#Option "NoDDC" # [<bool>]
#Option "ShowCache" # [<bool>]
#Option "XvMCSurfaces" # <i>
#Option "PageFlip" # [<bool>]
Option "XAANoOffscreenPixmaps" "true"
#
Driver "intel"
VendorName "Intel Corporation"
BoardName "Mobile GM965/GL960 Integrated Graphics Controller"
BusID "PCI:0:2:0"
EndSection
Section "DRI"
Mode 0666
EndSection
Section "Screen"
Identifier "Screen0"
Device "Card0"
Monitor "Monitor0"
SubSection "Display"
Viewport 0 0
Depth 1
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 4
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 8
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 15
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 16
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 24
EndSubSection
EndSection