我使用的是Kubuntu8.04.1。目前使用的是2.6.24-21-generic的内核
机子是ondaN61GT的板子，显卡是板载的NVIDIA 6150LE。显示器是DX-777NS（17寸纯平显示器）。
显卡驱动是使用Hard Driver Manager直接安装的。。貌似自动帮我装上NIVIDIA GLX-NEW
我在显示器与监视器里面检测不到自己的显示器型号，于是打算自己手动选型号，无奈里面没有我显示器的型号于是就选了通用Monitor 1024*768。。然后重启选上1024*768的分辨率。但是我在WINDOWS里面能使用75或者85HZ的模式啊。他这里给我选的刷新率没一个是正常的。。。。连70或者75都不给我选。要是就是62或者68那样，现在显示起来就像是在近距离看电视的样子，很明显看到一行一行的在显示。而且这个刷新率的闪烁速度看的眼睛很辛苦.很恶心阿。有哪位高人能帮帮我。让我能正常工作在1024*768*75HZ的环境下啊。。。现在很囧啊。
下面是我xorg。conf文件的内容
# xorg.conf (X.Org X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the xorg.conf manual page.
# (Type "man xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
# sudo dpkg-reconfigure -phigh xserver-xorg
Section "InputDevice"
Identifier "Generic Keyboard"
Driver "kbd"
Option "XkbRules" "xorg"
Option "XkbModel" "pc105"
Option "XkbLayout" "us"
Option "XkbOptions" "shun"
EndSection
Section "InputDevice"
Identifier "Configured Mouse"
Driver "mouse"
Option "CorePointer"
EndSection
Section "Device"
Identifier "Configured Video Device"
Boardname "NVIDIA GeForce 6 Series"
Busid "PCI:0:5:0"
Driver "nvidia"
Screen 0
Vendorname "NVIDIA"
EndSection
Section "Monitor"
Identifier "Configured Monitor"
Vendorname "Generic CRT Display"
Modelname "Monitor 1024x768"
Horizsync 31.5-61.0
Vertrefresh 50-75
modeline "640x480@60" 25.2 640 656 752 800 480 490 492 525 -vsync -hsync
modeline "640x480@72" 31.5 640 664 704 832 480 489 491 520 -vsync -hsync
modeline "640x480@75" 31.5 640 656 720 840 480 481 484 500 -vsync -hsync
modeline "800x600@56" 36.0 800 824 896 1024 600 601 603 625 +hsync +vsync
modeline "800x600@72" 50.0 800 856 976 1040 600 637 643 666 +hsync +vsync
modeline "800x600@75" 49.5 800 816 896 1056 600 601 604 625 +hsync +vsync
modeline "800x600@60" 40.0 800 840 968 1056 600 601 605 628 +hsync +vsync
modeline "832x624@75" 57.284 832 864 928 1152 624 625 628 667 -vsync -hsync
modeline "1024x768@75" 78.8 1024 1040 1136 1312 768 769 772 800 +hsync +vsync
modeline "1024x768@70" 75.0 1024 1048 1184 1328 768 771 777 806 -vsync -hsync
modeline "1024x768@60" 65.0 1024 1048 1184 1344 768 771 777 806 -vsync -hsync
modeline "1280x960@60" 102.1 1280 1360 1496 1712 960 961 964 994 -hsync +vsync
Gamma 1.0
EndSection
Section "Screen"
Identifier "Default Screen"
Monitor "Configured Monitor"
Device "Configured Video Device"
Defaultdepth 24
SubSection "Display"
Depth 24
Virtual 1280 960
Modes "1024x768@60" "1280x960@60" "1024x768@70" "1024x768@75" "832x624@75" "800x600@60" "800x600@75" "800x600@72" "800x600@56" "640x480@75" "640x480@72" "640x480@60"
EndSubSection
EndSection
Section "ServerLayout"
Identifier "Default Layout"
screen 0 "Default Screen" 0 0
EndSection
Section "Module"
Load "glx"
Load "v4l"
EndSection
Section "ServerFlags"
EndSection
[问题]哪位达人帮忙看看关于我的显示器刷新率的问题阿
-
shun
- 帖子： 11
- 注册时间： 2008-08-17 8:36
-
shun
- 帖子： 11
- 注册时间： 2008-08-17 8:36
-
shun
- 帖子： 11
- 注册时间： 2008-08-17 8:36
-
poet
- 帖子： 2841
- 注册时间： 2006-09-11 22:47
你的 xorg.conf 里面有两行：
Horizsync 31.5-61.0
Vertrefresh 50-75
把它们改成：
Horizsync 31.5-80.0
Vertrefresh 50-100
然后
Virtual 1280 960
Modes "1024x768@60" "1280x960@60" "1024x768@70" "1024x768@75" ...
改成
Virtual 1024 768
Modes "1024x768@75" "1024x768@70" "1024x768@60" "1280x960@60" ...（只改前面几个，后面照抄）
然后重启 xwindow 就可以在那个分辨率对话框里面修改刷新率。如果不够，数字再改大一点。
方法二：安装 nvidia-settings，用这个程序进行设置。
Horizsync 31.5-61.0
Vertrefresh 50-75
把它们改成：
Horizsync 31.5-80.0
Vertrefresh 50-100
然后
Virtual 1280 960
Modes "1024x768@60" "1280x960@60" "1024x768@70" "1024x768@75" ...
改成
Virtual 1024 768
Modes "1024x768@75" "1024x768@70" "1024x768@60" "1280x960@60" ...（只改前面几个，后面照抄）
然后重启 xwindow 就可以在那个分辨率对话框里面修改刷新率。如果不够，数字再改大一点。
方法二：安装 nvidia-settings，用这个程序进行设置。