这样启动正常吗?

系统安装、升级讨论
版面规则
我们都知道新人的确很菜,也喜欢抱怨,并且带有浓厚的Windows习惯,但既然在这里询问,我们就应该有责任帮助他们解决问题,而不是直接泼冷水、简单的否定或发表对解决问题没有任何帮助的帖子。乐于分享,以人为本,这正是Ubuntu的精神所在。
头像
rroamor
帖子: 112
注册时间: 2008-08-21 17:15
来自: 浙江

这样启动正常吗?

#1

帖子 rroamor » 2008-08-24 16:58

每次开机启动进入橙色滚动条时,滚到一半左右就会突然进入类似dos的界面,一堆英文显示在黑屏里。我只注意到有个英文是login。过一会自动转到输入帐号的登录界面。我第一次装时橙色进度条会一滚到底,然后快速的闪几个黑屏就到登录界面,不会有英文字在上停那么久。
注消时也是先到黑屏再到登录界面。
还有我玩时都是把亮度调得很低,但每次注消或重启时亮度都会自动调最高 :shock:

请问系统这样启动正常吗? 若不正常,怎样改??
图片
头像
CLOCKWORKHEART
帖子: 635
注册时间: 2007-11-05 19:26

#2

帖子 CLOCKWORKHEART » 2008-08-24 17:06

前面是正常的,如果感觉不妥可以装startup manager管理一下
至于后面的亮度,我还重来没注意过
Everything that has a beginning has an end.
头像
rroamor
帖子: 112
注册时间: 2008-08-21 17:15
来自: 浙江

#3

帖子 rroamor » 2008-08-24 17:09

CLOCKWORKHEART 写了:前面是正常的,如果感觉不妥可以装startup manager管理一下
至于后面的亮度,我还重来没注意过
哦,谢谢,你是说进入类似dos满屏英文的界面是正常的?
图片
头像
sinyadvan
帖子: 724
注册时间: 2008-04-02 15:36
来自: O_O

#4

帖子 sinyadvan » 2008-08-24 18:04

类似dos
:oops:
把 /boot/grub/menu.lst 里的splash去了,就都dos了
^o^ && O_O && ^_^
One World|One Dream|One Piece
愛 ^_^ 這個 美麗的世界O_O

本公司专治各种不服、不爽、谩骂、挑衅。
头像
rroamor
帖子: 112
注册时间: 2008-08-21 17:15
来自: 浙江

#5

帖子 rroamor » 2008-08-24 18:29

sinyadvan 写了:
类似dos
:oops:
把 /boot/grub/menu.lst 里的splash去了,就都dos了
- -!!我不想要那dos,我想让滚动条一滚到底。有办法不?
图片
头像
Angus_Yann
帖子: 1736
注册时间: 2008-03-20 23:29
来自: ZJU

#6

帖子 Angus_Yann » 2008-08-24 20:34

字符显示多帅啊~
80后俊男一枚,Arch党,软件洁癖,标准果粉,萝莉控
欢迎Follow我的Twitter:@AngusYann <--点击前请自学[穿·墙·术]
头像
sinyadvan
帖子: 724
注册时间: 2008-04-02 15:36
来自: O_O

#7

帖子 sinyadvan » 2008-08-24 20:47

Angus_Yann 写了:字符显示多帅啊~
9494多有matrix的感觉
^o^ && O_O && ^_^
One World|One Dream|One Piece
愛 ^_^ 這個 美麗的世界O_O

本公司专治各种不服、不爽、谩骂、挑衅。
头像
emptyzone
帖子: 27
注册时间: 2008-05-28 10:41

#8

帖子 emptyzone » 2008-08-24 20:50

rroamor 写了:
sinyadvan 写了:
类似dos
:oops:
把 /boot/grub/menu.lst 里的splash去了,就都dos了
- -!!我不想要那dos,我想让滚动条一滚到底。有办法不?

先去http://www.gnome-look.org下载一个usplash主题,在splash screen分类里,一般标着usplash的都行,随便找一个下载吧

然后安装启动管理器
sudo apt-get install startupmanager

然后找到“系统-系统管理-启动管理器”

在外观选项卡里找到关于usplash主题的地方
点"管理usplash主题",把刚才你下载的那个.so的文件添加进看来

最后把usplash主题设置成新的就行了

总体来讲这个思路就是“换一个新的usplash主题,这个时候会重写usplash的设置文件,也就可以修正启动中的问题了“。
头像
rroamor
帖子: 112
注册时间: 2008-08-21 17:15
来自: 浙江

#9

帖子 rroamor » 2008-08-24 20:51

:shock: 那你们也是字符进程??不会吧 ,等我学了linux命令我再完matrix吧。
图片
头像
rroamor
帖子: 112
注册时间: 2008-08-21 17:15
来自: 浙江

#10

帖子 rroamor » 2008-08-24 20:53

emptyzone 写了:
rroamor 写了:
sinyadvan 写了:
类似dos
:oops:
把 /boot/grub/menu.lst 里的splash去了,就都dos了
- -!!我不想要那dos,我想让滚动条一滚到底。有办法不?

先去http://www.gnome-look.org下载一个usplash主题,在splash screen分类里,一般标着usplash的都行,随便找一个下载吧

然后安装启动管理器
sudo apt-get install startupmanager

然后找到“系统-系统管理-启动管理器”

在外观选项卡里找到关于usplash主题的地方
点"管理usplash主题",把刚才你下载的那个.so的文件添加进看来

最后把usplash主题设置成新的就行了

总体来讲这个思路就是“换一个新的usplash主题,这个时候会重写usplash的设置文件,也就可以修正启动中的问题了“。

ho~ yeah yeah,我先邯郸学步试一下。谢谢!
图片
头像
rroamor
帖子: 112
注册时间: 2008-08-21 17:15
来自: 浙江

#11

帖子 rroamor » 2008-08-24 21:37

8楼兄弟,还是不行阿。我换了splash,新的splash还是进度条快滚到一半是转入黑屏字符界面。再出现登录界面。我刚才点重启后,先是进入黑屏字符界面,等了10多秒才离开那界面重启的。亮度又跑到最高了。- -!!!
图片
delectate
帖子: 18311
注册时间: 2008-01-09 22:41

#12

帖子 delectate » 2008-08-24 21:43

rroamor 写了:
CLOCKWORKHEART 写了:前面是正常的,如果感觉不妥可以装startup manager管理一下
至于后面的亮度,我还重来没注意过
哦,谢谢,你是说进入类似dos满屏英文的界面是正常的?
不正常

值得研究
头像
emptyzone
帖子: 27
注册时间: 2008-05-28 10:41

#13

帖子 emptyzone » 2008-08-24 21:59

rroamor 写了:8楼兄弟,还是不行阿。我换了splash,新的splash还是进度条快滚到一半是转入黑屏字符界面。再出现登录界面。我刚才点重启后,先是进入黑屏字符界面,等了10多秒才离开那界面重启的。亮度又跑到最高了。- -!!!
那我也不知道了哎。。。我的原来 也出过这个问题。。。就用这种方法解决掉了。。。。

亮度的事没办法的。。。。那是硬件驱动的问题。。。还好我没碰到。。。。
头像
Angus_Yann
帖子: 1736
注册时间: 2008-03-20 23:29
来自: ZJU

#14

帖子 Angus_Yann » 2008-08-24 22:03

sinyadvan 写了:
Angus_Yann 写了:字符显示多帅啊~
9494多有matrix的感觉
同道中人呐~
呵呵
80后俊男一枚,Arch党,软件洁癖,标准果粉,萝莉控
欢迎Follow我的Twitter:@AngusYann <--点击前请自学[穿·墙·术]
头像
rroamor
帖子: 112
注册时间: 2008-08-21 17:15
来自: 浙江

#15

帖子 rroamor » 2008-08-24 22:04

哦,我还真倒霉,这是第三次装。不知道是不是windows下装系统的缘故。8楼兄弟叫我输入如下命令得到的结果。
dmesg
ls -lh /etc/rc2.d
ls -lh /etc/rc6.d
ls -lh /etc/rc0.d

[ 26.428714] system 00:06: ioport range 0x700-0x703 has been reserved
[ 26.428717] system 00:06: ioport range 0x800-0x80f has been reserved
[ 26.428720] system 00:06: ioport range 0x1000-0x107f has been reserved
[ 26.428723] system 00:06: ioport range 0x1180-0x11bf has been reserved
[ 26.428726] system 00:06: ioport range 0x1640-0x164f has been reserved
[ 26.428730] system 00:06: ioport range 0xfe00-0xfe00 has been reserved
[ 26.428733] system 00:06: ioport range 0xff00-0xff7f has been reserved
[ 26.429232] PCI: Bridge: 0000:00:1c.0
[ 26.429236] IO window: 2000-2fff
[ 26.429242] MEM window: c0000000-c3ffffff
[ 26.429247] PREFETCH window: cc000000-cdffffff
[ 26.429255] PCI: Bridge: 0000:00:1c.1
[ 26.429258] IO window: 3000-3fff
[ 26.429264] MEM window: f0000000-f3ffffff
[ 26.429269] PREFETCH window: fa000000-fbffffff
[ 26.429278] PCI: Bridge: 0000:00:1c.2
[ 26.429283] IO window: 4000-4fff
[ 26.429295] MEM window: f4000000-f7ffffff
[ 26.429304] PREFETCH window: fc000000-fdffffff
[ 26.429317] PCI: Bridge: 0000:00:1c.3
[ 26.429322] IO window: 5000-5fff
[ 26.429332] MEM window: b8000000-bbffffff
[ 26.429337] PREFETCH window: c8000000-c9ffffff
[ 26.429344] PCI: Bridge: 0000:00:1c.4
[ 26.429345] IO window: disabled.
[ 26.429352] MEM window: disabled.
[ 26.429356] PREFETCH window: disabled.
[ 26.429362] PCI: Bridge: 0000:00:1c.5
[ 26.429363] IO window: disabled.
[ 26.429370] MEM window: f8200000-f82fffff
[ 26.429375] PREFETCH window: disabled.
[ 26.429389] PCI: Bus 15, cardbus bridge: 0000:0e:04.0
[ 26.429391] IO window: 00001400-000014ff
[ 26.429396] IO window: 00006000-000060ff
[ 26.429402] PREFETCH window: 54000000-57ffffff
[ 26.429407] MEM window: 58000000-5bffffff
[ 26.429413] PCI: Bridge: 0000:00:1e.0
[ 26.429414] IO window: disabled.
[ 26.429420] MEM window: f8300000-f83fffff
[ 26.429425] PREFETCH window: disabled.
[ 26.429463] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 17 (level, low) -> IRQ 17
[ 26.429471] PCI: Setting latency timer of device 0000:00:1c.0 to 64
[ 26.429498] ACPI: PCI Interrupt 0000:00:1c.1 -> GSI 16 (level, low) -> IRQ 16
[ 26.429504] PCI: Setting latency timer of device 0000:00:1c.1 to 64
[ 26.429532] ACPI: PCI Interrupt 0000:00:1c.2[C] -> GSI 18 (level, low) -> IRQ 18
[ 26.429538] PCI: Setting latency timer of device 0000:00:1c.2 to 64
[ 26.429565] ACPI: PCI Interrupt 0000:00:1c.3[D] -> GSI 19 (level, low) -> IRQ 19
[ 26.429571] PCI: Setting latency timer of device 0000:00:1c.3 to 64
[ 26.429598] ACPI: PCI Interrupt 0000:00:1c.4[A] -> GSI 17 (level, low) -> IRQ 17
[ 26.429604] PCI: Setting latency timer of device 0000:00:1c.4 to 64
[ 26.429635] ACPI: PCI Interrupt 0000:00:1c.5 -> GSI 16 (level, low) -> IRQ 16
[ 26.429640] PCI: Setting latency timer of device 0000:00:1c.5 to 64
[ 26.429656] PCI: Setting latency timer of device 0000:00:1e.0 to 64
[ 26.429674] ACPI: PCI Interrupt 0000:0e:04.0[A] -> GSI 18 (level, low) -> IRQ 18
[ 26.429689] NET: Registered protocol family 2
[ 26.464688] IP route cache hash table entries: 32768 (order: 6, 262144 bytes)
[ 26.465209] TCP established hash table entries: 131072 (order: 9, 2097152 bytes)
[ 26.466733] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 26.467523] TCP: Hash tables configured (established 131072 bind 65536)
[ 26.467527] TCP reno registered
[ 26.476798] checking if image is initramfs... it is
[ 27.372898] Freeing initrd memory: 8393k freed
[ 27.379601] Simple Boot Flag at 0x37 set to 0x1
[ 27.380615] audit: initializing netlink socket (disabled)
[ 27.380640] audit(1219613485.756:1): initialized
[ 27.382961] VFS: Disk quotas dquot_6.5.1
[ 27.383039] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 27.383179] io scheduler noop registered
[ 27.383181] io scheduler anticipatory registered
[ 27.383183] io scheduler deadline registered
[ 27.383307] io scheduler cfq registered (default)
[ 27.383322] Boot video device is 0000:00:02.0
[ 27.384962] PCI: Setting latency timer of device 0000:00:1c.0 to 64
[ 27.385106] assign_interrupt_mode Found MSI capability
[ 27.385220] Allocate Port Service[0000:00:1c.0:pcie00]
[ 27.385261] Allocate Port Service[0000:00:1c.0:pcie02]
[ 27.385467] PCI: Setting latency timer of device 0000:00:1c.1 to 64
[ 27.385609] assign_interrupt_mode Found MSI capability
[ 27.385720] Allocate Port Service[0000:00:1c.1:pcie00]
[ 27.385758] Allocate Port Service[0000:00:1c.1:pcie02]
[ 27.385971] PCI: Setting latency timer of device 0000:00:1c.2 to 64
[ 27.386113] assign_interrupt_mode Found MSI capability
[ 27.386224] Allocate Port Service[0000:00:1c.2:pcie00]
[ 27.386260] Allocate Port Service[0000:00:1c.2:pcie02]
[ 27.386461] PCI: Setting latency timer of device 0000:00:1c.3 to 64
[ 27.386604] assign_interrupt_mode Found MSI capability
[ 27.386717] Allocate Port Service[0000:00:1c.3:pcie00]
[ 27.386755] Allocate Port Service[0000:00:1c.3:pcie02]
[ 27.386961] PCI: Setting latency timer of device 0000:00:1c.4 to 64
[ 27.387103] assign_interrupt_mode Found MSI capability
[ 27.387210] Allocate Port Service[0000:00:1c.4:pcie00]
[ 27.387247] Allocate Port Service[0000:00:1c.4:pcie02]
[ 27.387452] PCI: Setting latency timer of device 0000:00:1c.5 to 64
[ 27.387589] assign_interrupt_mode Found MSI capability
[ 27.387695] Allocate Port Service[0000:00:1c.5:pcie00]
[ 27.387732] Allocate Port Service[0000:00:1c.5:pcie02]
[ 27.417378] Real Time Clock Driver v1.12ac
[ 27.417658] hpet_resources: 0xfed00000 is busy
[ 27.417698] Linux agpgart interface v0.102
[ 27.417701] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[ 27.417881] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 27.418593] 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 27.419420] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[ 27.419499] input: Macintosh mouse button emulation as /devices/virtual/input/input0
[ 27.419612] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 27.460850] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 27.460856] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 27.472694] mice: PS/2 mouse device common for all mice
[ 27.472741] cpuidle: using governor ladder
[ 27.472744] cpuidle: using governor menu
[ 27.472895] NET: Registered protocol family 1
[ 27.473022] registered taskstats version 1
[ 27.473166] Magic number: 4:522:551
[ 27.473287] hash matches device PNP0C0F:02
[ 27.473300] /build/buildd/linux-2.6.24/drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
[ 27.473303] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 27.473305] EDD information not available.
[ 27.473314] Freeing unused kernel memory: 320k freed
[ 27.503648] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
[ 28.704810] fuse init (API version 7.9)
[ 28.726229] ACPI: SSDT 3F6D8BB7, 0238 (r1 PmRef Cpu0Ist 3000 INTL 20050624)
[ 28.726497] ACPI: SSDT 3F6D8688, 04AA (r1 PmRef Cpu0Cst 3001 INTL 20050624)
[ 28.734501] Monitor-Mwait will be used to enter C-1 state
[ 28.734505] Monitor-Mwait will be used to enter C-2 state
[ 28.734507] Monitor-Mwait will be used to enter C-3 state
[ 28.734705] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
[ 28.734712] ACPI: Processor [CPU0] (supports 8 throttling states)
[ 28.735020] ACPI: SSDT 3F6D8DEF, 00C8 (r1 PmRef Cpu1Ist 3000 INTL 20050624)
[ 28.735273] ACPI: SSDT 3F6D8B32, 0085 (r1 PmRef Cpu1Cst 3000 INTL 20050624)
[ 28.736439] ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3])
[ 28.736445] ACPI: Processor [CPU1] (supports 8 throttling states)
[ 28.938617] usbcore: registered new interface driver usbfs
[ 28.938643] usbcore: registered new interface driver hub
[ 28.938684] usbcore: registered new device driver usb
[ 28.939891] USB Universal Host Controller Interface driver v3.0
[ 28.939950] ACPI: PCI Interrupt 0000:00:1a.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 28.939967] PCI: Setting latency timer of device 0000:00:1a.0 to 64
[ 28.939974] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[ 28.940261] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
[ 28.940311] uhci_hcd 0000:00:1a.0: irq 16, io base 0x00001820
[ 28.940459] usb usb1: configuration #1 chosen from 1 choice
[ 28.940484] hub 1-0:1.0: USB hub found
[ 28.940490] hub 1-0:1.0: 2 ports detected
[ 29.047237] ACPI: PCI Interrupt 0000:00:1a.1 -> GSI 21 (level, low) -> IRQ 21
[ 29.047255] PCI: Setting latency timer of device 0000:00:1a.1 to 64
[ 29.047262] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[ 29.047287] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 2
[ 29.047333] uhci_hcd 0000:00:1a.1: irq 21, io base 0x00001840
[ 29.047456] usb usb2: configuration #1 chosen from 1 choice
[ 29.047481] hub 2-0:1.0: USB hub found
[ 29.047487] hub 2-0:1.0: 2 ports detected
[ 29.151086] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 23
[ 29.151105] PCI: Setting latency timer of device 0000:00:1d.0 to 64
[ 29.151111] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 29.151141] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 3
[ 29.151189] uhci_hcd 0000:00:1d.0: irq 23, io base 0x00001860
[ 29.151322] usb usb3: configuration #1 chosen from 1 choice
[ 29.151349] hub 3-0:1.0: USB hub found
[ 29.151354] hub 3-0:1.0: 2 ports detected
[ 29.233606] SCSI subsystem initialized
[ 29.254986] ACPI: PCI Interrupt 0000:00:1d.1 -> GSI 19 (level, low) -> IRQ 19
[ 29.255008] PCI: Setting latency timer of device 0000:00:1d.1 to 64
[ 29.255014] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 29.255051] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 4
[ 29.255098] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00001880
[ 29.255219] usb usb4: configuration #1 chosen from 1 choice
[ 29.255245] hub 4-0:1.0: USB hub found
[ 29.255251] hub 4-0:1.0: 2 ports detected
[ 29.260886] libata version 3.00 loaded.
[ 29.358864] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18
[ 29.358887] PCI: Setting latency timer of device 0000:00:1d.2 to 64
[ 29.358894] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 29.358923] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 5
[ 29.358976] uhci_hcd 0000:00:1d.2: irq 18, io base 0x000018a0
[ 29.359116] usb usb5: configuration #1 chosen from 1 choice
[ 29.359145] hub 5-0:1.0: USB hub found
[ 29.359152] hub 5-0:1.0: 2 ports detected
[ 29.462868] ACPI: PCI Interrupt 0000:0e:06.0[A] -> GSI 22 (level, low) -> IRQ 22
[ 29.462886] ACPI: PCI Interrupt 0000:00:1a.7[C] -> GSI 18 (level, low) -> IRQ 18
[ 29.463210] PCI: Setting latency timer of device 0000:00:1a.7 to 64
[ 29.463219] ehci_hcd 0000:00:1a.7: EHCI Host Controller
[ 29.463274] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 6
[ 29.467204] ehci_hcd 0000:00:1a.7: debug port 1
[ 29.467217] PCI: cache line size of 32 is not supported by device 0000:00:1a.7
[ 29.467225] ehci_hcd 0000:00:1a.7: irq 18, io mem 0xf8604000
[ 29.486650] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[ 29.486804] usb usb6: configuration #1 chosen from 1 choice
[ 29.486831] hub 6-0:1.0: USB hub found
[ 29.486839] hub 6-0:1.0: 4 ports detected
[ 29.516268] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[22] MMIO=[f8301000-f83017ff] Max Packet=[2048] IR/IT contexts=[4/4]
[ 29.590684] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 23
[ 29.591028] PCI: Setting latency timer of device 0000:00:1d.7 to 64
[ 29.591037] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 29.591094] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 7
[ 29.595047] ehci_hcd 0000:00:1d.7: debug port 1
[ 29.595060] PCI: cache line size of 32 is not supported by device 0000:00:1d.7
[ 29.595068] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xf8604400
[ 29.618522] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[ 29.618671] usb usb7: configuration #1 chosen from 1 choice
[ 29.618702] hub 7-0:1.0: USB hub found
[ 29.618710] hub 7-0:1.0: 6 ports detected
[ 29.726674] tg3.c:v3.86 (November 9, 2007)
[ 29.726772] ACPI: PCI Interrupt 0000:04:00.0[A] -> GSI 17 (level, low) -> IRQ 17
[ 29.726795] PCI: Setting latency timer of device 0000:04:00.0 to 64
[ 30.019348] eth0: Tigon3 [partno(BCM95906) rev c002 PHY(5906)] (PCI Express) 10/100Base-TX Ethernet 00:1b:38:a3:8f:e3
[ 30.019355] eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] WireSpeed[0] TSOcap[1]
[ 30.019358] eth0: dma_rwctrl[76180000] dma_mask[64-bit]
[ 30.022129] ata_piix 0000:00:1f.1: version 2.12
[ 30.022161] ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 19 (level, low) -> IRQ 19
[ 30.022212] PCI: Setting latency timer of device 0000:00:1f.1 to 64
[ 30.039396] scsi0 : ata_piix
[ 30.039472] scsi1 : ata_piix
[ 30.040155] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x1810 irq 14
[ 30.040158] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x1818 irq 15
[ 30.116570] usb 1-1: new low speed USB device using uhci_hcd and address 2
[ 30.185698] usb 1-1: configuration #1 chosen from 1 choice
[ 30.196794] ata1.00: ATAPI: Optiarc CD-RW CRX880A, KX07, max UDMA/33
[ 30.208095] usbcore: registered new interface driver hiddev
[ 30.214488] input: USB Mouse as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1:1.0/input/input2
[ 30.227359] input,hidraw0: USB HID v1.10 Mouse [USB Mouse] on usb-0000:00:1a.0-1
[ 30.227388] usbcore: registered new interface driver usbhid
[ 30.227392] /build/buildd/linux-2.6.24/drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
[ 30.287101] ata1.00: configured for UDMA/33
[ 30.302138] Clocksource tsc unstable (delta = -263710485 ns)
[ 30.363032] scsi 0:0:0:0: CD-ROM Optiarc CD-RW CRX880A KX07 PQ: 0 ANSI: 5
[ 30.363144] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
[ 30.378518] ieee1394: Host added: ID:BUS[0-00:1023] GUID[00023f7cb5402f1d]
[ 30.426125] ACPI: PCI Interrupt 0000:00:1f.2 -> GSI 19 (level, low) -> IRQ 19
[ 30.426186] PCI: Setting latency timer of device 0000:00:1f.2 to 64
[ 30.426258] scsi2 : ata_piix
[ 30.426331] scsi3 : ata_piix
[ 30.427660] ata3: SATA max UDMA/133 cmd 0x18e0 ctl 0x18f0 bmdma 0x1920 irq 19
[ 30.427663] ata4: SATA max UDMA/133 cmd 0x1900 ctl 0x1910 bmdma 0x1928 irq 19
[ 30.519306] ata3.00: ATA-8: WDC WD1200BEVS-22UST0, 01.01A01, max UDMA/133
[ 30.519311] ata3.00: 234441648 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 30.522158] ata3.00: configured for UDMA/133
[ 30.598902] scsi 2:0:0:0: Direct-Access ATA WDC WD1200BEVS-2 01.0 PQ: 0 ANSI: 5
[ 30.622309] Driver 'sd' needs updating - please use bus_type methods
[ 30.622446] sd 2:0:0:0: [sda] 234441648 512-byte hardware sectors (120034 MB)
[ 30.622461] sd 2:0:0:0: [sda] Write Protect is off
[ 30.622464] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 30.622482] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 30.622564] sd 2:0:0:0: [sda] 234441648 512-byte hardware sectors (120034 MB)
[ 30.622576] sd 2:0:0:0: [sda] Write Protect is off
[ 30.622578] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 30.622595] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 30.622599] sda:<4>Driver 'sr' needs updating - please use bus_type methods
[ 30.631519] sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray
[ 30.631524] Uniform CD-ROM driver Revision: 3.20
[ 30.631582] sr 0:0:0:0: Attached scsi CD-ROM sr0
[ 30.633638] sda1 sda2 < sda5 sda6 sda7 sda8 >
[ 30.689482] sd 2:0:0:0: [sda] Attached SCSI disk
[ 30.694081] sr 0:0:0:0: Attached scsi generic sg0 type 5
[ 30.694108] sd 2:0:0:0: Attached scsi generic sg1 type 0
[ 31.505554] loop: module loaded
[ 31.530184] kjournald starting. Commit interval 5 seconds
[ 31.530211] EXT3-fs: mounted filesystem with ordered data mode.
[ 39.495915] iTCO_vendor_support: vendor-support=0
[ 39.522713] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.02 (26-Jul-2007)
[ 39.522832] iTCO_wdt: Found a ICH8M TCO device (Version=2, TCOBASE=0x1060)
[ 39.522880] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 39.557643] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 39.573370] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 39.620339] ACPI: EC: non-query interrupt received, switching to interrupt mode
[ 39.621584] agpgart: Detected an Intel 965GM Chipset.
[ 39.622157] agpgart: Detected 7676K stolen memory.
[ 39.638361] agpgart: AGP aperture is 256M @ 0xd0000000
[ 39.645964] input: PC Speaker as /devices/platform/pcspkr/input/input3
[ 39.713609] input: Power Button (FF) as /devices/virtual/input/input4
[ 39.733341] ACPI: Power Button (FF) [PWRF]
[ 39.733478] input: Lid Switch as /devices/virtual/input/input5
[ 39.733562] ACPI: Lid Switch [LID0]
[ 39.733626] input: Power Button (CM) as /devices/virtual/input/input6
[ 39.769282] ACPI: Power Button (CM) [PWRB]
[ 40.391594] Yenta: CardBus bridge found at 0000:0e:04.0 [17aa:3828]
[ 40.391645] Yenta: Using CSCINT to route CSC interrupts to PCI
[ 40.391647] Yenta: Routing CardBus interrupts to PCI
[ 40.391656] Yenta TI: socket 0000:0e:04.0, mfunc 0x00111112, devctl 0x44
[ 40.550688] ACPI: WMI-Acer: Mapper loaded
[ 40.600444] ACPI: AC Adapter [ACAD] (on-line)
[ 40.621507] Yenta: ISA IRQ mask 0x0cf8, PCI irq 18
[ 40.621514] Socket status: 30000006
[ 40.621517] Yenta: Raising subordinate bus# of parent bus (#0e) from #0f to #12
[ 40.621525] pcmcia: parent PCI bridge Memory window: 0xf8300000 - 0xf83fffff
[ 40.651909] ACPI: Battery Slot [BAT1] (battery present)
[ 40.781807] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:02/LNXVIDEO:00/input/input7
[ 40.828231] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no)
[ 40.835740] ricoh-mmc: Ricoh MMC Controller disabling driver
[ 40.835746] ricoh-mmc: Copyright(c) Philip Langdale
[ 40.835816] ricoh-mmc: Ricoh MMC controller found at 0000:0e:06.2 [1180:0843] (rev 12)
[ 40.835842] ricoh-mmc: Controller is now disabled.
[ 40.884260] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:01/input/input8
[ 40.908144] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 41.013011] sdhci: Secure Digital Host Controller Interface driver
[ 41.013016] sdhci: Copyright(c) Pierre Ossman
[ 41.013073] sdhci: SDHCI controller found at 0000:0e:06.1 [1180:0822] (rev 22)
[ 41.013115] ACPI: PCI Interrupt 0000:0e:06.1 -> GSI 23 (level, low) -> IRQ 23
[ 41.013433] sdhci:slot0: Will use DMA mode even though HW doesn't fully claim to support it.
[ 41.013533] mmc0: SDHCI at 0xf8301800 irq 23 DMA
[ 41.289701] iwl3945: Intel(R) PRO/Wireless 3945ABG/BG Network Connection driver for Linux, 1.2.0
[ 41.289705] iwl3945: Copyright(c) 2003-2007 Intel Corporation
[ 41.289894] ACPI: PCI Interrupt 0000:0c:00.0[A] -> GSI 17 (level, low) -> IRQ 17
[ 41.289915] PCI: Setting latency timer of device 0000:0c:00.0 to 64
[ 41.290225] iwl3945: Detected Intel PRO/Wireless 3945ABG Network Connection
[ 41.483934] NET: Registered protocol family 10
[ 41.484176] lo: Disabled Privacy Extensions
[ 41.484532] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 41.636184] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 20 (level, low) -> IRQ 20
[ 41.636562] PCI: Setting latency timer of device 0000:00:1b.0 to 64
[ 41.669197] hda_codec: Unknown model for ALC268, trying auto-probe from BIOS...
[ 42.642511] tg3: eth0: Link is up at 100 Mbps, full duplex.
[ 42.642515] tg3: eth0: Flow control is on for TX and on for RX.
[ 42.644094] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 42.726068] iwl3945: Radio Frequency Kill Switch is On:
[ 42.726071] Kill switch must be turned off for wireless networking to work.
[ 42.726965] iwl3945: WARNING: Requesting MAC access during RFKILL wakes up NIC
[ 42.737103] iwl3945: WARNING: Requesting MAC access during RFKILL wakes up NIC
[ 42.757241] iwl3945: WARNING: Requesting MAC access during RFKILL wakes up NIC
[ 42.784855] iwl3945: WARNING: Requesting MAC access during RFKILL wakes up NIC
[ 42.804983] iwl3945: Tunable channels: 13 802.11bg, 4 802.11a channels
[ 42.966334] input: ImPS/2 Logitech Wheel Mouse as /devices/platform/i8042/serio1/input/input9
[ 43.609420] lp: driver loaded but no devices found
[ 44.138435] EXT3 FS on loop0, internal journal
[ 52.489949] eth0: no IPv6 routers present
[ 80.929636] Adding 976552k swap on /host/ubuntu/disks/swap.disk. Priority:-1 extents:1675 across:17816048k
[ 83.547241] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 83.843319] PPP generic driver version 2.4.2
[ 83.877657] NET: Registered protocol family 17
[ 84.067161] NET: Registered protocol family 24
[ 84.360040] No dock devices found.
[ 87.451879] Bluetooth: Core ver 2.11
[ 87.452083] NET: Registered protocol family 31
[ 87.452087] Bluetooth: HCI device and connection manager initialized
[ 87.452095] Bluetooth: HCI socket layer initialized
[ 87.499129] Bluetooth: L2CAP ver 2.9
[ 87.499137] Bluetooth: L2CAP socket layer initialized
[ 87.584485] Bluetooth: RFCOMM socket layer initialized
[ 87.584680] Bluetooth: RFCOMM TTY layer initialized
[ 87.584685] Bluetooth: RFCOMM ver 1.8
[ 89.805057] [drm] Initialized drm 1.1.0 20060810
[ 89.809348] ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 89.809364] PCI: Setting latency timer of device 0000:00:02.0 to 64
[ 89.809500] [drm] Initialized i915 1.6.0 20060119 on minor 0
[ 107.692108] CPU0 attaching NULL sched-domain.
[ 107.692117] CPU1 attaching NULL sched-domain.
[ 107.710908] CPU0 attaching sched-domain:
[ 107.710916] domain 0: span 03
[ 107.710918] groups: 01 02
[ 107.710922] domain 1: span 03
[ 107.710924] groups: 03
[ 107.710926] CPU1 attaching sched-domain:
[ 107.710928] domain 0: span 03
[ 107.710930] groups: 02 01
[ 107.710934] domain 1: span 03
[ 107.710936] groups: 03
tabacco@tabacco-laptop:~$ ls -lh /etc/rc2.d
总用量 4.0K
-rw-r--r-- 1 root root 556 2008-04-19 13:05 README
lrwxrwxrwx 1 root root 19 2008-08-23 05:11 S01policykit -> ../init.d/policykit
lrwxrwxrwx 1 root root 17 2008-08-23 05:11 S05vbesave -> ../init.d/vbesave
lrwxrwxrwx 1 root root 15 2008-08-23 05:11 S10acpid -> ../init.d/acpid
lrwxrwxrwx 1 root root 25 2008-08-23 05:11 S10powernowd.early -> ../init.d/powernowd.early
lrwxrwxrwx 1 root root 18 2008-08-23 05:11 S10sysklogd -> ../init.d/sysklogd
lrwxrwxrwx 1 root root 34 2008-08-23 05:11 S10xserver-xorg-input-wacom -> ../init.d/xserver-xorg-input-wacom
lrwxrwxrwx 1 root root 15 2008-08-23 05:11 S11klogd -> ../init.d/klogd
lrwxrwxrwx 1 root root 23 2008-08-23 10:25 S12915resolution -> ../init.d/915resolution
lrwxrwxrwx 1 root root 14 2008-08-23 05:11 S12dbus -> ../init.d/dbus
lrwxrwxrwx 1 root root 22 2008-08-23 05:11 S18avahi-daemon -> ../init.d/avahi-daemon
lrwxrwxrwx 1 root root 16 2008-08-23 05:11 S20apport -> ../init.d/apport
lrwxrwxrwx 1 root root 22 2008-08-23 05:11 S20hotkey-setup -> ../init.d/hotkey-setup
lrwxrwxrwx 1 root root 23 2008-08-23 05:11 S20nvidia-kernel -> ../init.d/nvidia-kernel
lrwxrwxrwx 1 root root 19 2008-08-23 05:11 S20powernowd -> ../init.d/powernowd
lrwxrwxrwx 1 root root 15 2008-08-23 05:11 S20rsync -> ../init.d/rsync
lrwxrwxrwx 1 root root 16 2008-08-23 05:11 S24dhcdbd -> ../init.d/dhcdbd
lrwxrwxrwx 1 root root 13 2008-08-23 05:11 S24hal -> ../init.d/hal
lrwxrwxrwx 1 root root 19 2008-08-23 05:11 S25bluetooth -> ../init.d/bluetooth
lrwxrwxrwx 1 root root 20 2008-08-23 05:11 S25pulseaudio -> ../init.d/pulseaudio
lrwxrwxrwx 1 root root 13 2008-08-23 05:11 S30gdm -> ../init.d/gdm
lrwxrwxrwx 1 root root 16 2008-08-24 17:13 S50brltty -> ../init.d/brltty
lrwxrwxrwx 1 root root 17 2008-08-23 05:11 S89anacron -> ../init.d/anacron
lrwxrwxrwx 1 root root 13 2008-08-23 05:11 S89atd -> ../init.d/atd
lrwxrwxrwx 1 root root 14 2008-08-23 05:11 S89cron -> ../init.d/cron
lrwxrwxrwx 1 root root 17 2008-08-23 05:11 S98usplash -> ../init.d/usplash
lrwxrwxrwx 1 root root 22 2008-08-23 05:11 S99acpi-support -> ../init.d/acpi-support
lrwxrwxrwx 1 root root 21 2008-08-23 05:11 S99laptop-mode -> ../init.d/laptop-mode
lrwxrwxrwx 1 root root 18 2008-08-23 05:11 S99rc.local -> ../init.d/rc.local
lrwxrwxrwx 1 root root 19 2008-08-23 05:11 S99rmnologin -> ../init.d/rmnologin
lrwxrwxrwx 1 root root 24 2008-08-23 05:11 S99stop-readahead -> ../init.d/stop-readahead
tabacco@tabacco-laptop:~$ ls -lh /etc/rc6.d
总用量 4.0K
lrwxrwxrwx 1 root root 13 2008-08-23 05:11 K01gdm -> ../init.d/gdm
lrwxrwxrwx 1 root root 17 2008-08-23 05:11 K01usplash -> ../init.d/usplash
lrwxrwxrwx 1 root root 23 2008-08-23 10:25 K12915resolution -> ../init.d/915resolution
lrwxrwxrwx 1 root root 16 2008-08-23 05:11 K16dhcdbd -> ../init.d/dhcdbd
lrwxrwxrwx 1 root root 16 2008-08-23 05:11 K20apport -> ../init.d/apport
lrwxrwxrwx 1 root root 22 2008-08-23 05:11 K20avahi-daemon -> ../init.d/avahi-daemon
lrwxrwxrwx 1 root root 20 2008-08-23 05:11 K25hwclock.sh -> ../init.d/hwclock.sh
lrwxrwxrwx 1 root root 13 2008-08-23 05:11 K39ufw -> ../init.d/ufw
lrwxrwxrwx 1 root root 20 2008-08-23 05:11 K50alsa-utils -> ../init.d/alsa-utils
lrwxrwxrwx 1 root root 26 2008-08-23 05:11 K59mountoverflowtmp -> ../init.d/mountoverflowtmp
lrwxrwxrwx 1 root root 21 2008-08-23 05:11 K99laptop-mode -> ../init.d/laptop-mode
-rw-r--r-- 1 root root 353 2008-04-19 13:05 README
lrwxrwxrwx 1 root root 41 2008-08-23 05:11 S01linux-restricted-modules-common -> ../init.d/linux-restricted-modules-common
lrwxrwxrwx 1 root root 22 2008-08-23 05:11 S15wpa-ifupdown -> ../init.d/wpa-ifupdown
lrwxrwxrwx 1 root root 18 2008-08-23 05:11 S20sendsigs -> ../init.d/sendsigs
lrwxrwxrwx 1 root root 17 2008-08-23 05:11 S30urandom -> ../init.d/urandom
lrwxrwxrwx 1 root root 22 2008-08-23 05:11 S31umountnfs.sh -> ../init.d/umountnfs.sh
lrwxrwxrwx 1 root root 18 2008-08-23 05:11 S40umountfs -> ../init.d/umountfs
lrwxrwxrwx 1 root root 20 2008-08-23 05:11 S60umountroot -> ../init.d/umountroot
lrwxrwxrwx 1 root root 16 2008-08-23 05:11 S90reboot -> ../init.d/reboot
tabacco@tabacco-laptop:~$ ls -lh /etc/rc0.d
图片
回复