[问题]求助大侠

[yijiexiao]

我在我的东芝SS2000 上装的UBUNTU
主板是ALI的 也不指望什么3D了
只是装然后 分辨率只有800X600
按照很多介绍改了以后就无法进入桌面了
我的xorg 文件是这样的
Section "Screen"
Identifier "Default Screen"
Monitor "Configured Monitor"
Device "Configured Video Device"
EndSection
只有这三项 我都不知道如何下手
希望大侠多多指点

[qiang_liu8183]

不要重复发帖

[yijiexiao]

不要重复发帖

下次 注意！ 各位大虾帮忙啊

[cnkilior]

应该是没有安装显卡驱动。

--
报上显卡型号！

[yijiexiao]

应该是没有安装显卡驱动。

--
报上显卡型号！

16M Trident Cyber Aladdin-T显卡
不知道有没有相关的驱动

[yijiexiao]

不指望什么特效， 能够分辨率搞到 1024 我就非常知足里

[yijiexiao]

四楼的大虾，有办法吗

[yijiexiao]

四楼的大虾，有办法吗

[aric286]

这个最是烦人，不好弄啊，我这里可发生不少次这种事了，现在还是没辙，几乎完全是听天由命，正在看linux教程，学会了帮你，现在帮你顶顶

[yijiexiao]

要不要驱动都无所谓 我只是为了方便用aircrack的 只要能够改到 1024 就太知足里

[yijiexiao]

要不要驱动都无所谓 我只是为了方便用aircrack的 只要能够改到 1024 就太知足里

[qiang_liu8183]

Trident显卡用开源驱动即可，RedHat 9都能很好的支持，Ubuntu更没问题了

xorg.conf都改了什么？改回去不久行了？

[yijiexiao]

Trident显卡用开源驱动即可，RedHat 9都能很好的支持，Ubuntu更没问题了

xorg.conf都改了什么？改回去不久行了？

大虾 我是菜鸟 你说的开源驱动 具体要如何搞呢 谢谢

[qiang_liu8183]

Trident显卡用开源驱动即可，RedHat 9都能很好的支持，Ubuntu更没问题了

xorg.conf都改了什么？改回去不久行了？

大虾 我是菜鸟 你说的开源驱动 具体要如何搞呢 谢谢

新立得里搜索一下Trident，我现在没用ubuntu，没法帮你查具体是哪个驱动

[wymangp]

the english version for this problem, has been workout on oct.2008 you can just take a refernce from the ubuntu.org or details below, i am trying this way at present. see what happens
------------------------------
HOWTO: Get proper video resolution with trident video card and Ubuntu 8.04

--------------------------------------------------------------------------------

This guide assumes that you are doing a fresh install of ubuntu 8.04 and you get a wrong resolution with a trident video card.

These are the steps I did:

1. Boot up the ubuntu live cd. I selected "Try Ubuntu without any change to your computer".

2. Once it has booted up open up a terminal and enter "sudo displayconfig-gtk" (without the speech marks)

3. A window should pop up. Select Graphics Card from top. Click the button where it says 'Driver'. A window will pop up. Select the button where it says 'Choose Driver by model'

4. On the list box on the left select 'Other' then on the right list box select 'VESA (generic driver)' or something to do with 'VESA'

5. Click ok or apply to all the dialog boxes. Log out and Ubuntu will automatically log back on in 10 seconds. Once it has logged back in. go back into terminal and enter "sudo displayconfig-gtk" (without the speech marks).

6. Click on the button where it says 'Model' and a dialog box will pop up. Select 'Generic' on the left list box and 'LCD Panel ' & what ever your laptop's native resolution is. Click ok on that box. Then click ok on the other box. Log out again and wait 10 seconds.

7. Click the icon on the desktop called 'Install' and install Ubuntu on your computer with whatever settings you want. Once Ubuntu is installed then reboot.

8. Log on with your user account that you created during the install. Open up terminal and enter "sudo displayconfig-gtk" (without the speech marks). The terminal will ask for a password. Just put in the PASSWORD that you normally log on with your username with.

9. A dialog box will pop up. Select Graphics Card from top. Click the button where it says 'Driver'. A window will pop up. Select the button where it says 'Choose Driver by model'

10. Select 'trident' on the left list box. On the right list box select what type of trident card you have (In my case I had a CyberBlade)

11. Click OK. Then Click ok on the other dialog box. Then restart the computer. When you log back in you will have the right resolution with your laptop. Enjoy


I hope you can understand this guide. I typed what I remembered at the back of my head. Sorry for the Spelling Mistakes and Grammar (hey i'm only 14 years old). I take no responsibility if it stuffs up your computer somehow (but it won't)


Feel free to post whether it worked or not

--------------------------------------------------------------------------------
Last edited by ilovelinux33467; April 23rd, 2008 at 07:30 PM. copyright