lspci请教一下我的是什么显卡？

[rosn]

我的系统是ubuntu studio14.10,显卡一直无法安装，lspci又看不出来哪个是显卡。只好帖出来让大家帮忙指导一下如何找到显卡并安装驱动。谢谢。
lspci
00:00.0 Host bridge: Intel Corporation Core Processor DRAM Controller (rev 18)
00:01.0 PCI bridge: Intel Corporation Core Processor PCI Express x16 Root Port (rev 18)
00:16.0 Communication controller: Intel Corporation 5 Series/3400 Series Chipset HECI Controller (rev 06)
00:16.2 IDE interface: Intel Corporation 5 Series/3400 Series Chipset PT IDER Controller (rev 06)
00:16.3 Serial controller: Intel Corporation 5 Series/3400 Series Chipset KT Controller (rev 06)
00:19.0 Ethernet controller: Intel Corporation 82578DC Gigabit Network Connection (rev 06)
00:1a.0 USB controller: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller (rev 06)
00:1b.0 Audio device: Intel Corporation 5 Series/3400 Series Chipset High Definition Audio (rev 06)
00:1c.0 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 1 (rev 06)
00:1c.4 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 5 (rev 06)
00:1d.0 USB controller: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller (rev 06)
00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev a6)
00:1f.0 ISA bridge: Intel Corporation 5 Series Chipset LPC Interface Controller (rev 06)
00:1f.2 IDE interface: Intel Corporation 5 Series/3400 Series Chipset 4 port SATA IDE Controller (rev 06)
00:1f.3 SMBus: Intel Corporation 5 Series/3400 Series Chipset SMBus Controller (rev 06)
00:1f.5 IDE interface: Intel Corporation 5 Series/3400 Series Chipset 2 port SATA IDE Controller (rev 06)
01:00.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] RV515 PRO [Radeon X1300/X1550 Series]
01:00.1 Display controller: Advanced Micro Devices, Inc. [AMD/ATI] RV515 PRO [Radeon X1300/X1550 Series] (Secondary)
04:00.0 FireWire (IEEE 1394): Texas Instruments TSB43AB21 IEEE-1394a-2000 Controller (PHY/Link)
3f:00.0 Host bridge: Intel Corporation Core Processor QuickPath Architecture Generic Non-core Registers (rev 05)
3f:00.1 Host bridge: Intel Corporation Core Processor QuickPath Architecture System Address Decoder (rev 05)
3f:02.0 Host bridge: Intel Corporation Core Processor QPI Link 0 (rev 05)
3f:02.1 Host bridge: Intel Corporation Core Processor QPI Physical 0 (rev 05)
3f:02.2 Host bridge: Intel Corporation Core Processor Reserved (rev 05)
3f:02.3 Host bridge: Intel Corporation Core Processor Reserved (rev 05)

[月下叹逍遥]

01:00.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] RV515 PRO [Radeon X1300/X1550 Series]
01:00.1 Display controller: Advanced Micro Devices, Inc. [AMD/ATI] RV515 PRO [Radeon X1300/X1550 Series] (Secondary)

[rosn]

谢谢，终于知道我的是什么显卡了：[AMD/ATI] RV515 PRO [Radeon X1300/X1550 Series]，下一步应该如何安装它的驱动呢。还请各位能人指点一下。谢谢。

[poloshiao]

01:00.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] RV515 PRO [Radeon X1300/X1550 Series]
01:00.1 Display controller: Advanced Micro Devices, Inc. [AMD/ATI] RV515 PRO [Radeon X1300/X1550 Series] (Secondary)

參閱
https://wiki.ubuntu.com/X/Config/Hybrid ... stallation
AMD systems:

[rosn]

參閱
https://wiki.ubuntu.com/X/Config/Hybrid ... stallation
AMD systems:

谢谢，我参考这个来安装，安装正常，关机后重启分辨率为1600X1200（只有1600X1200这个分辨率，不可调整），看来是安装了显卡驱动了，但系统变得非常慢，而且可能因为分辨率不适合字变小了，也模糊不清，还不如没装驱动前低分辨率的字清晰，打开AMD管理器时提示如图，请问还要怎么做才能让分辨率达到1920X1200呢，谢谢！：

[poloshiao]

关机后重启分辨率为1600X1200（只有1600X1200这个分辨率，不可调整）

viewtopic.php?p=3120013#p3120013

而且可能因为分辨率不适合字变小了，也模糊不清，

如果是登入 unity 安裝 unity-tweak-tool 可以微調 包含字型
如果是登入 gnome 安裝 gnome-tweak-tool 可以微調 包含字型

无标题.png

顯示還沒初始化
sudo aticonfig --initial
或
sudo amdconfig --initial
或
sudo aticonfig --adapter=all --initial
或
sudo amdconfig --adapter=all --initial
參閱
https://help.ubuntu.com/community/BinaryDriverHowto/AMD

[wtry]

01:00.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] RV515 PRO [Radeon X1300/X1550 Series]

[poloshiao]

01:00.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] RV515 PRO [Radeon X1300/X1550 Series]

01:00.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] RV515 PRO [Radeon X1300/X1550 Series]
01:00.1 Display controller: Advanced Micro Devices, Inc. [AMD/ATI] RV515 PRO [Radeon X1300/X1550 Series] (Secondary)

0. 如果是較新的單顯卡
sudo amdconfig --initial

1. 如果是較新的雙顯卡
sudo amdconfig --adapter=all --initial

2. 還需要把 開源驅動 radeon 列入載入黑名單
參閱
https://help.ubuntu.com/community/BinaryDriverHowto/AMD

3. 重新開機 後
把下面指令 複製 貼進終端機 執行
3-1. uname -r
3-2. sudo lspci -knn
3-3. sudo lshw -numeric -class video
把結果直接 選取/複製 貼上來
不必擷圖

[rosn]

谢谢楼上的前辈们，我参阅https://help.ubuntu.com/community/BinaryDriverHowto/AMD进行操作，因为是英文要翻译，意思不太明确，只进行前面几步操作，我现把操作的终端帖上来，以便前辈们进一步的指导：

~$ sudo amdconfig --initial

amdconfig: No supported adapters detected

~$ sudo amdconfig --adapter=all --initial

amdconfig: No supported adapters detected

~$ lspci -vvnn | grep VGA

Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
BridgeCtl: Parity- SERR- NoISA- VGA+ MAbort- >Reset- FastB2B-
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
01:00.0 VGA compatible controller [0300]: Advanced Micro Devices, Inc. [AMD/ATI] RV515 PRO [Radeon X1300/X1550 Series] [1002:7142] (prog-if 00 [VGA controller])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-

~$ fglrxinfo

X Error of failed request: BadRequest (invalid request code or no such operation)
Major opcode of failed request: 155 (GLX)
Minor opcode of failed request: 19 (X_GLXQueryServerString)
Serial number of failed request: 12
Current serial number in output stream: 12

~$

[rosn]

谢谢楼上的前辈们，我参阅https://help.ubuntu.com/community/BinaryDriverHowto/AMD进行操作，因为是英文要翻译，意思不太明确，只进行前面几步操作，我现把操作的终端帖上来，以便前辈们进一步的指导：

~$ sudo amdconfig --initial

amdconfig: No supported adapters detected

~$ sudo amdconfig --adapter=all --initial

amdconfig: No supported adapters detected

~$ lspci -vvnn | grep VGA

Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
BridgeCtl: Parity- SERR- NoISA- VGA+ MAbort- >Reset- FastB2B-
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
01:00.0 VGA compatible controller [0300]: Advanced Micro Devices, Inc. [AMD/ATI] RV515 PRO [Radeon X1300/X1550 Series] [1002:7142] (prog-if 00 [VGA controller])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-

~$ fglrxinfo

X Error of failed request: BadRequest (invalid request code or no such operation)
Major opcode of failed request: 155 (GLX)
Minor opcode of failed request: 19 (X_GLXQueryServerString)
Serial number of failed request: 12
Current serial number in output stream: 12

~$

[rosn]

不好意思，论坛出错我以为没发出去重发了几次，没想到每次都发成功了。

[poloshiao]

~$ lspci -vvnn | grep VGA
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
...以下略

懷疑 你的記憶體 (內存) 可能有問題
重新開機
開機選單 選擇 Memory test (memtest86+)
測試一下 記憶體 (內存)
看看能否連續 3 個 PASSED
https://help.ubuntu.com/community/MemoryTest

如果開機沒有出現開機選單
開機 按住 ESC 或 SHIFT 鍵不放 可以強迫出現開機選單

论坛出错我以为没发出去重发了几次，没想到每次都发成功了。

如果發現重發當下 後面還沒有人跟著貼文 你可以按下該篇重發文右下方的編輯/刪除 打勾
就可以自己刪除

[rosn]

測試記憶體連續 3 個 PASSED,8G内存测试了整整一个下午。内存没问题了，下一步应该如何是好呢。

[poloshiao]

下一步应该如何是好呢。

viewtopic.php?p=3120141#p3120141
3. 重新開機 後
把下面指令 複製 貼進終端機 執行
3-1. uname -r
3-2. sudo lspci -knn
3-3. sudo lshw -numeric -class video
把結果直接 選取/複製 貼上來
不必擷圖

[rosn]

谢谢poloshiao,结果如下：

~$ uname -r
3.13.0-43-lowlatency
~$ sudo lspci -knn
[sudo] password for ssss:
00:00.0 Host bridge [0600]: Intel Corporation Core Processor DRAM Controller [8086:0040] (rev 18)
Subsystem: Intel Corporation Device [8086:0037]
00:01.0 PCI bridge [0604]: Intel Corporation Core Processor PCI Express x16 Root Port [8086:0041] (rev 18)
Kernel driver in use: pcieport
00:16.0 Communication controller [0780]: Intel Corporation 5 Series/3400 Series Chipset HECI Controller [8086:3b64] (rev 06)
Subsystem: Intel Corporation Device [8086:0037]
Kernel driver in use: mei_me
00:16.2 IDE interface [0101]: Intel Corporation 5 Series/3400 Series Chipset PT IDER Controller [8086:3b66] (rev 06)
Subsystem: Intel Corporation Device [8086:0037]
Kernel driver in use: ata_generic
00:16.3 Serial controller [0700]: Intel Corporation 5 Series/3400 Series Chipset KT Controller [8086:3b67] (rev 06)
Subsystem: Intel Corporation Device [8086:0037]
Kernel driver in use: serial
00:19.0 Ethernet controller [0200]: Intel Corporation 82578DC Gigabit Network Connection [8086:10f0] (rev 06)
Subsystem: Intel Corporation Device [8086:0037]
Kernel driver in use: e1000e
00:1a.0 USB controller [0c03]: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller [8086:3b3c] (rev 06)
Subsystem: Intel Corporation Device [8086:0037]
Kernel driver in use: ehci-pci
00:1b.0 Audio device [0403]: Intel Corporation 5 Series/3400 Series Chipset High Definition Audio [8086:3b56] (rev 06)
Subsystem: Intel Corporation Device [8086:0037]
Kernel driver in use: snd_hda_intel
00:1c.0 PCI bridge [0604]: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 1 [8086:3b42] (rev 06)
Kernel driver in use: pcieport
00:1c.4 PCI bridge [0604]: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 5 [8086:3b4a] (rev 06)
Kernel driver in use: pcieport
00:1d.0 USB controller [0c03]: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller [8086:3b34] (rev 06)
Subsystem: Intel Corporation Device [8086:0037]
Kernel driver in use: ehci-pci
00:1e.0 PCI bridge [0604]: Intel Corporation 82801 PCI Bridge [8086:244e] (rev a6)
00:1f.0 ISA bridge [0601]: Intel Corporation 5 Series Chipset LPC Interface Controller [8086:3b06] (rev 06)
Subsystem: Intel Corporation Device [8086:0037]
Kernel driver in use: lpc_ich
00:1f.2 IDE interface [0101]: Intel Corporation 5 Series/3400 Series Chipset 4 port SATA IDE Controller [8086:3b20] (rev 06)
Subsystem: Intel Corporation Device [8086:0037]
Kernel driver in use: ata_piix
00:1f.3 SMBus [0c05]: Intel Corporation 5 Series/3400 Series Chipset SMBus Controller [8086:3b30] (rev 06)
Subsystem: Intel Corporation Device [8086:0037]
00:1f.5 IDE interface [0101]: Intel Corporation 5 Series/3400 Series Chipset 2 port SATA IDE Controller [8086:3b26] (rev 06)
Subsystem: Intel Corporation Device [8086:0037]
Kernel driver in use: ata_piix
01:00.0 VGA compatible controller [0300]: Advanced Micro Devices, Inc. [AMD/ATI] RV515 PRO [Radeon X1300/X1550 Series] [1002:7142]
Subsystem: ASUSTeK Computer Inc. EAX1300PRO/TD/256M [1043:0142]
01:00.1 Display controller [0380]: Advanced Micro Devices, Inc. [AMD/ATI] RV515 PRO [Radeon X1300/X1550 Series] (Secondary) [1002:7162]
Subsystem: ASUSTeK Computer Inc. Device [1043:0143]
04:00.0 FireWire (IEEE 1394) [0c00]: Texas Instruments TSB43AB21 IEEE-1394a-2000 Controller (PHY/Link) [104c:8026]
Subsystem: Pinnacle Systems Inc. Device [11bd:000e]
Kernel driver in use: firewire_ohci
3f:00.0 Host bridge [0600]: Intel Corporation Core Processor QuickPath Architecture Generic Non-core Registers [8086:2c61] (rev 05)
Subsystem: Intel Corporation Device [8086:8086]
3f:00.1 Host bridge [0600]: Intel Corporation Core Processor QuickPath Architecture System Address Decoder [8086:2d01] (rev 05)
Subsystem: Intel Corporation Device [8086:8086]
3f:02.0 Host bridge [0600]: Intel Corporation Core Processor QPI Link 0 [8086:2d10] (rev 05)
Subsystem: Intel Corporation Device [8086:8086]
3f:02.1 Host bridge [0600]: Intel Corporation Core Processor QPI Physical 0 [8086:2d11] (rev 05)
Subsystem: Intel Corporation Device [8086:8086]
3f:02.2 Host bridge [0600]: Intel Corporation Core Processor Reserved [8086:2d12] (rev 05)
Subsystem: Intel Corporation Device [8086:8086]
3f:02.3 Host bridge [0600]: Intel Corporation Core Processor Reserved [8086:2d13] (rev 05)
Subsystem: Intel Corporation Device [8086:8086]
~$ sudo lshw -numeric -class video
*-display:0 UNCLAIMED
description: VGA compatible controller
product: RV515 PRO [Radeon X1300/X1550 Series] [1002:7142]
vendor: Advanced Micro Devices, Inc. [AMD/ATI] [1002]
physical id: 0
bus info: pci@0000:01:00.0
version: 00
width: 64 bits
clock: 33MHz
capabilities: pm pciexpress msi vga_controller bus_master cap_list
configuration: latency=0
resources: memory:d0000000-dfffffff memory:fe630000-fe63ffff ioport:e000(size=256) memory:fe600000-fe61ffff
*-display:1 UNCLAIMED
description: Display controller
product: RV515 PRO [Radeon X1300/X1550 Series] (Secondary) [1002:7162]
vendor: Advanced Micro Devices, Inc. [AMD/ATI] [1002]
physical id: 0.1
bus info: pci@0000:01:00.1
version: 00
width: 64 bits
clock: 33MHz
capabilities: pm pciexpress bus_master cap_list
configuration: latency=0
resources: memory:fe620000-fe62ffff
~$