当前时区为 UTC + 8 小时



发表新帖 回复这个主题  [ 14 篇帖子 ] 
作者 内容
1 楼 
 文章标题 : 12.04内核3.13.0.44升级后0.46后无法进入系统
帖子发表于 : 2015-02-28 16:21 
头像

注册: 2013-03-08 0:26
帖子: 32
系统: ubuntu(x64)
送出感谢: 1
接收感谢: 0 次
如题,开机进入进度条后了,如图一,

按esc后如图二

请大神赐教,系统资料很重要,不能重装。

更新说明,media/public 是一个ntfs的启动挂载盘,之前一直正常,更新后才出此问题


附件:
image.jpg
image.jpg [ 1.77 MiB | 被浏览 2357 次 ]



最后由 skcmm 编辑于 2015-02-28 19:12,总共编辑了 1 次
页首
 用户资料  
 
2 楼 
 文章标题 : Re: 12.04内核3.13.0.44升级后0.46后无法进入系统
帖子发表于 : 2015-02-28 16:26 

注册: 2009-05-16 13:41
帖子: 21
系统: Archlinux
送出感谢: 0 次
接收感谢: 0 次
1、Ctrl+Alt+F2,进tty
2、dmesg或者/var/log下看启动错误信息
3、处理启动错误


页首
 用户资料  
 
3 楼 
 文章标题 : Re: 12.04内核3.13.0.44升级后0.46后无法进入系统
帖子发表于 : 2015-02-28 16:36 
头像

注册: 2013-03-08 0:26
帖子: 32
系统: ubuntu(x64)
送出感谢: 1
接收感谢: 0 次
TeddyHouse 写道:
1、Ctrl+Alt+F2,进tty
2、dmesg或者/var/log下看启动错误信息
3、处理启动错误


无法进入命令行呀 哥们


页首
 用户资料  
 
4 楼 
 文章标题 : Re: 12.04内核3.13.0.44升级后0.46后无法进入系统
帖子发表于 : 2015-02-28 17:03 
头像

注册: 2008-02-17 23:47
帖子: 22120
地址: 美丽富饶的那啥星球
送出感谢: 11
接收感谢: 84
启动菜单里还有旧内核选项嘛,试试


_________________
明天就换大三八!
——8核CPU、8G内存、8T硬盘……
8卡交火,80寸大屏放8个……
IPv8的光纤要8条……

---------------------------------------------------------------------------------
[图片版]新手当自强(续)FAQ
[新手进阶]挂载、fstab、调整linux分区
[图片版]E17桌面环境配置手把手


页首
 用户资料  
 
5 楼 
 文章标题 : Re: 12.04内核3.13.0.44升级后0.46后无法进入系统
帖子发表于 : 2015-02-28 17:07 

注册: 2009-05-16 13:41
帖子: 21
系统: Archlinux
送出感谢: 0 次
接收感谢: 0 次
按这个帖子的操作,修改grub启动参数,以Text模式进系统
http://www.jb51.net/os/Ubuntu/128747.html


页首
 用户资料  
 
6 楼 
 文章标题 : Re: 12.04内核3.13.0.44升级后0.46后无法进入系统
帖子发表于 : 2015-02-28 18:30 

注册: 2009-08-04 16:33
帖子: 16882
送出感谢: 21
接收感谢: 1825
引用:
12.04内核3.13.0.44升级后0.46后无法进入系统

從開機選單 選擇原來的 内核 3.13.0.44 開機 看看 能否登入桌面
如果沒有出現開機選單 請再貼文


页首
 用户资料  
 
7 楼 
 文章标题 : Re: 12.04内核3.13.0.44升级后0.46后无法进入系统
帖子发表于 : 2015-02-28 18:55 
头像

注册: 2013-03-08 0:26
帖子: 32
系统: ubuntu(x64)
送出感谢: 1
接收感谢: 0 次
adagio 写道:
启动菜单里还有旧内核选项嘛,试试

旧内核一样进入到这个界面


页首
 用户资料  
 
8 楼 
 文章标题 : Re: 12.04内核3.13.0.44升级后0.46后无法进入系统
帖子发表于 : 2015-02-28 18:57 

注册: 2009-08-04 16:33
帖子: 16882
送出感谢: 21
接收感谢: 1825
選 Recovery Mode 看看

如果還是一樣
使用 Ubuntu Live USB/DVD 開機 看看 能否登入 試用桌面


页首
 用户资料  
 
9 楼 
 文章标题 : Re: 12.04内核3.13.0.44升级后0.46后无法进入系统
帖子发表于 : 2015-02-28 19:10 
头像

注册: 2013-03-08 0:26
帖子: 32
系统: ubuntu(x64)
送出感谢: 1
接收感谢: 0 次
poloshiao 写道:
引用:
12.04内核3.13.0.44升级后0.46后无法进入系统

從開機選單 選擇原來的 内核 3.13.0.44 開機 看看 能否登入桌面
如果沒有出現開機選單 請再貼文


选择旧内核一样进入此错误界面


页首
 用户资料  
 
10 楼 
 文章标题 : Re: 12.04内核3.13.0.44升级后0.46后无法进入系统
帖子发表于 : 2015-02-28 19:23 
头像

注册: 2013-03-08 0:26
帖子: 32
系统: ubuntu(x64)
送出感谢: 1
接收感谢: 0 次
感谢各位的回帖,现在用手机回帖不方便。


页首
 用户资料  
 
11 楼 
 文章标题 : Re: 12.04内核3.13.0.44升级后0.46后无法进入系统
帖子发表于 : 2015-03-10 23:33 
头像

注册: 2013-03-08 0:26
帖子: 32
系统: ubuntu(x64)
送出感谢: 1
接收感谢: 0 次
感谢各位的耐心回帖,目前我急需解决几个问题。
首先交待一下软、硬件环境,HDD + SSD 的结构,SSD 是将原有光驱位替换得来。系统安装在SSD上,
/etc/fstab 添加了一行配置: # in start mount /dev/sda9 /media/public ntfs defaults,locale=zh_CN.UTF-8 0 0

1、系统更新后,原来的 N 卡驱动无效了,已经重新手动安装了最新版本的驱动,但不知以后更新时,是否会有问题?
2、系统更新后,启动时提示的乱码为(上图中的乱码):为 /media/public 准备的磁盘不存在 ,按 S 进行跳过,或按 M 进行编辑
此现象导致,按 S 进行跳过后,系统无法加载原来的磁盘了。许多资料是放在 HDD 上的。(试过手动装载( mount 命令),能成功)
3、最关键的是我的无线网卡无法启动了,在网络下找不到无线这个选项。(请优先解决 哈哈)
4、其他问题未知


页首
 用户资料  
 
12 楼 
 文章标题 : Re: 12.04内核3.13.0.44升级后0.46后无法进入系统
帖子发表于 : 2015-03-10 23:36 
头像

注册: 2013-03-08 0:26
帖子: 32
系统: ubuntu(x64)
送出感谢: 1
接收感谢: 0 次
顺便贴上 dmesg log 信息:
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 3.13.0-46-generic (buildd@toyol) (gcc version 4.6.3 (Ubuntu/Linaro 4.6.3-1ubuntu5) ) #77~precise1-Ubuntu SMP Mon Mar 2 23:24:50 UTC 2015 (Ubuntu 3.13.0-46.77~precise1-generic 3.13.11-ckt15)
[ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-3.13.0-46-generic root=UUID=fba27914-66eb-48c8-8acc-5b653d06a500 ro quiet splash vt.handoff=7
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] Centaur CentaurHauls
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009e7ff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009e800-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000d2000-0x00000000000d3fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000dc000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000bf27bfff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000bf27c000-0x00000000bf281fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000bf282000-0x00000000bf35efff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000bf35f000-0x00000000bf370fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000bf371000-0x00000000bf3f1fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000bf3f2000-0x00000000bf40efff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000bf40f000-0x00000000bf46efff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000bf46f000-0x00000000bf667fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000bf668000-0x00000000bf6e7fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000bf6e8000-0x00000000bf70efff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000bf70f000-0x00000000bf716fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000bf717000-0x00000000bf71efff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000bf71f000-0x00000000bf76bfff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000bf76c000-0x00000000bf777fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000bf778000-0x00000000bf77afff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000bf77b000-0x00000000bf78afff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000bf78b000-0x00000000bf78bfff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000bf78c000-0x00000000bf79efff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000bf79f000-0x00000000bf7fefff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000bf7ff000-0x00000000bf7fffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000bf800000-0x00000000bfffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000feaff000-0x00000000feafffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec0ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed003ff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed8ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x00000001fbffffff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000200000000-0x000000023bffffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.6 present.
[ 0.000000] DMI: LENOVO 2522RD7/2522RD7, BIOS 6IET81WW (1.41 ) 02/09/2012
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] No AGP bridge found
[ 0.000000] e820: last_pfn = 0x23c000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-D3FFF write-protect
[ 0.000000] D4000-DBFFF uncachable
[ 0.000000] DC000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 disabled
[ 0.000000] 1 base 000000000 mask F80000000 write-back
[ 0.000000] 2 base 080000000 mask FC0000000 write-back
[ 0.000000] 3 base 100000000 mask F00000000 write-back
[ 0.000000] 4 base 200000000 mask FC0000000 write-back
[ 0.000000] 5 base 23C000000 mask FFC000000 uncachable
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] original variable MTRRs
[ 0.000000] reg 1, base: 0GB, range: 2GB, type WB
[ 0.000000] reg 2, base: 2GB, range: 1GB, type WB
[ 0.000000] reg 3, base: 4GB, range: 4GB, type WB
[ 0.000000] reg 4, base: 8GB, range: 1GB, type WB
[ 0.000000] reg 5, base: 9152MB, range: 64MB, type UC
[ 0.000000] total RAM covered: 8128M
[ 0.000000] Found optimal setting for mtrr clean up
[ 0.000000] gran_size: 64K chunk_size: 128M num_reg: 5 lose cover RAM: 0G
[ 0.000000] New variable MTRRs
[ 0.000000] reg 0, base: 0GB, range: 2GB, type WB
[ 0.000000] reg 1, base: 2GB, range: 1GB, type WB
[ 0.000000] reg 2, base: 4GB, range: 4GB, type WB
[ 0.000000] reg 3, base: 8GB, range: 1GB, type WB
[ 0.000000] reg 4, base: 9152MB, range: 64MB, type UC
[ 0.000000] e820: update [mem 0xc0000000-0xffffffff] usable ==> reserved
[ 0.000000] e820: last_pfn = 0xbf800 max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [mem 0x000f68b0-0x000f68bf] mapped at [ffff8800000f68b0]
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] Base memory trampoline at [ffff880000098000] 98000 size 24576
[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[ 0.000000] [mem 0x00000000-0x000fffff] page 4k
[ 0.000000] BRK [0x01fe5000, 0x01fe5fff] PGTABLE
[ 0.000000] BRK [0x01fe6000, 0x01fe6fff] PGTABLE
[ 0.000000] BRK [0x01fe7000, 0x01fe7fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x23be00000-0x23bffffff]
[ 0.000000] [mem 0x23be00000-0x23bffffff] page 2M
[ 0.000000] BRK [0x01fe8000, 0x01fe8fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x238000000-0x23bdfffff]
[ 0.000000] [mem 0x238000000-0x23bdfffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x200000000-0x237ffffff]
[ 0.000000] [mem 0x200000000-0x237ffffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x00100000-0xbf27bfff]
[ 0.000000] [mem 0x00100000-0x001fffff] page 4k
[ 0.000000] [mem 0x00200000-0xbf1fffff] page 2M
[ 0.000000] [mem 0xbf200000-0xbf27bfff] page 4k
[ 0.000000] init_memory_mapping: [mem 0xbf282000-0xbf35efff]
[ 0.000000] [mem 0xbf282000-0xbf35efff] page 4k
[ 0.000000] init_memory_mapping: [mem 0xbf40f000-0xbf46efff]
[ 0.000000] [mem 0xbf40f000-0xbf46efff] page 4k
[ 0.000000] BRK [0x01fe9000, 0x01fe9fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0xbf70f000-0xbf716fff]
[ 0.000000] [mem 0xbf70f000-0xbf716fff] page 4k
[ 0.000000] BRK [0x01fea000, 0x01feafff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0xbf71f000-0xbf76bfff]
[ 0.000000] [mem 0xbf71f000-0xbf76bfff] page 4k
[ 0.000000] init_memory_mapping: [mem 0xbf7ff000-0xbf7fffff]
[ 0.000000] [mem 0xbf7ff000-0xbf7fffff] page 4k
[ 0.000000] init_memory_mapping: [mem 0x100000000-0x1fbffffff]
[ 0.000000] [mem 0x100000000-0x1fbffffff] page 2M
[ 0.000000] RAMDISK: [mem 0x35bd6000-0x36de2fff]
[ 0.000000] ACPI: RSDP 00000000000f6870 000024 (v02 LENOVO)
[ 0.000000] ACPI: XSDT 00000000bf7ef118 000094 (v01 LENOVO TP-6I 00001410 LTP 00000000)
[ 0.000000] ACPI: FACP 00000000bf7ef200 0000F4 (v04 LENOVO TP-6I 00001410 LNVO 00000001)
[ 0.000000] ACPI: DSDT 00000000bf7ef5d1 00F518 (v01 LENOVO TP-6I 00001410 MSFT 03000001)
[ 0.000000] ACPI: FACS 00000000bf6e7000 000040
[ 0.000000] ACPI: SSDT 00000000bf7ef3b4 00021D (v01 LENOVO TP-6I 00001410 MSFT 03000001)
[ 0.000000] ACPI: ECDT 00000000bf7feae9 000052 (v01 LENOVO TP-6I 00001410 LNVO 00000001)
[ 0.000000] ACPI: APIC 00000000bf7feb3b 000084 (v01 LENOVO TP-6I 00001410 LNVO 00000001)
[ 0.000000] ACPI: MCFG 00000000bf7febf7 00003C (v01 LENOVO TP-6I 00001410 LNVO 00000001)
[ 0.000000] ACPI: HPET 00000000bf7fec33 000038 (v01 LENOVO TP-6I 00001410 LNVO 00000001)
[ 0.000000] ACPI: ASF! 00000000bf7fedbe 0000A4 (v16 LENOVO TP-6I 00001410 PTL 00000001)
[ 0.000000] ACPI: SLIC 00000000bf7fee62 000176 (v01 LENOVO TP-6I 00001410 LTP 00000000)
[ 0.000000] ACPI: BOOT 00000000bf7fefd8 000028 (v01 LENOVO TP-6I 00001410 LTP 00000001)
[ 0.000000] ACPI: SSDT 00000000bf6e591a 00084B (v01 LENOVO TP-6I 00001410 INTL 20050513)
[ 0.000000] ACPI: TCPA 00000000bf78b000 000032 (v02 PTL CRESTLN 06040000 00005A52)
[ 0.000000] ACPI: SSDT 00000000bf77a000 0009F1 (v01 PmRef CpuPm 00003000 INTL 20061109)
[ 0.000000] ACPI: SSDT 00000000bf779000 000259 (v01 PmRef Cpu0Tst 00003000 INTL 20061109)
[ 0.000000] ACPI: SSDT 00000000bf778000 00049F (v01 PmRef ApTst 00003000 INTL 20061109)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000023bffffff]
[ 0.000000] Initmem setup node 0 [mem 0x00000000-0x23bffffff]
[ 0.000000] NODE_DATA [mem 0x23bff4000-0x23bff8fff]
[ 0.000000] [ffffea0000000000-ffffea0008ffffff] PMD -> [ffff880233600000-ffff88023b5fffff] on node 0
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x00001000-0x00ffffff]
[ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
[ 0.000000] Normal [mem 0x100000000-0x23bffffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00001000-0x0009dfff]
[ 0.000000] node 0: [mem 0x00100000-0xbf27bfff]
[ 0.000000] node 0: [mem 0xbf282000-0xbf35efff]
[ 0.000000] node 0: [mem 0xbf40f000-0xbf46efff]
[ 0.000000] node 0: [mem 0xbf70f000-0xbf716fff]
[ 0.000000] node 0: [mem 0xbf71f000-0xbf76bfff]
[ 0.000000] node 0: [mem 0xbf7ff000-0xbf7fffff]
[ 0.000000] node 0: [mem 0x100000000-0x1fbffffff]
[ 0.000000] node 0: [mem 0x200000000-0x23bffffff]
[ 0.000000] On node 0 totalpages: 2061228
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 21 pages reserved
[ 0.000000] DMA zone: 3997 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 12177 pages used for memmap
[ 0.000000] DMA32 zone: 779279 pages, LIFO batch:31
[ 0.000000] Normal zone: 20224 pages used for memmap
[ 0.000000] Normal zone: 1277952 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x1008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x04] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x05] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[ 0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009efff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000d1fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000d2000-0x000d3fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000d4000-0x000dbfff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000dc000-0x000fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbf27c000-0xbf281fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbf35f000-0xbf370fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbf371000-0xbf3f1fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbf3f2000-0xbf40efff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbf46f000-0xbf667fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbf668000-0xbf6e7fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbf6e8000-0xbf70efff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbf717000-0xbf71efff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbf76c000-0xbf777fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbf778000-0xbf77afff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbf77b000-0xbf78afff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbf78b000-0xbf78bfff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbf78c000-0xbf79efff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbf79f000-0xbf7fefff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbf800000-0xbfffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xc0000000-0xdfffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xe0000000-0xefffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xf0000000-0xfeafefff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfeaff000-0xfeafffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfeb00000-0xfebfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec0ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec10000-0xfecfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed00000-0xfed1bfff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed8ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed90000-0xfedfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x1fc000000-0x1ffffffff]
[ 0.000000] e820: [mem 0xc0000000-0xdfffffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff88023bc00000 s82368 r8192 d24128 u524288
[ 0.000000] pcpu-alloc: s82368 r8192 d24128 u524288 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 2028742
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-3.13.0-46-generic root=UUID=fba27914-66eb-48c8-8acc-5b653d06a500 ro quiet splash vt.handoff=7
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 8012168K/8244912K available (7625K kernel code, 1140K rwdata, 3492K rodata, 1360K init, 1444K bss, 232744K reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=4.
[ 0.000000] Offload RCU callbacks from all CPUs
[ 0.000000] Offload RCU callbacks from CPUs: 0-3.
[ 0.000000] NR_IRQS:16640 nr_irqs:712 16
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] allocated 33554432 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.004000] tsc: Detected 2527.149 MHz processor
[ 0.000003] Calibrating delay loop (skipped), value calculated using timer frequency.. 5054.29 BogoMIPS (lpj=10108596)
[ 0.000005] pid_max: default: 32768 minimum: 301
[ 0.000030] Security Framework initialized
[ 0.000049] AppArmor: AppArmor initialized
[ 0.000050] Yama: becoming mindful.
[ 0.000619] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.002474] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.003292] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.003305] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.003535] Initializing cgroup subsys memory
[ 0.003541] Initializing cgroup subsys devices
[ 0.003542] Initializing cgroup subsys freezer
[ 0.003544] Initializing cgroup subsys blkio
[ 0.003545] Initializing cgroup subsys perf_event
[ 0.003548] Initializing cgroup subsys hugetlb
[ 0.003568] CPU: Physical Processor ID: 0
[ 0.003569] CPU: Processor Core ID: 0
[ 0.003574] mce: CPU supports 9 MCE banks
[ 0.003584] CPU0: Thermal monitoring enabled (TM1)
[ 0.003594] Last level iTLB entries: 4KB 512, 2MB 7, 4MB 7
[ 0.003594] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32
[ 0.003594] tlb_flushall_shift: 6
[ 0.003691] Freeing SMP alternatives memory: 32K (ffffffff81e72000 - ffffffff81e7a000)
[ 0.004842] ACPI: Core revision 20131115
[ 0.011433] ACPI: All ACPI Tables successfully acquired
[ 0.031833] ftrace: allocating 31529 entries in 124 pages
[ 0.047061] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.086727] smpboot: CPU0: Intel(R) Core(TM) i5 CPU M 540 @ 2.53GHz (fam: 06, model: 25, stepping: 05)
[ 0.193394] Performance Events: PEBS fmt1+, 16-deep LBR, Westmere events, Intel PMU driver.
[ 0.193402] perf_event_intel: CPUID marked event: 'bus cycles' unavailable
[ 0.193404] ... version: 3
[ 0.193405] ... bit width: 48
[ 0.193406] ... generic registers: 4
[ 0.193407] ... value mask: 0000ffffffffffff
[ 0.193408] ... max period: 000000007fffffff
[ 0.193409] ... fixed-purpose events: 3
[ 0.193409] ... event mask: 000000070000000f
[ 0.194928] x86: Booting SMP configuration:
[ 0.208153] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.194931] .... node #0, CPUs: #1 #2 #3
[ 0.234676] x86: Booted up 1 node, 4 CPUs
[ 0.234682] smpboot: Total of 4 processors activated (20217.19 BogoMIPS)
[ 0.237373] devtmpfs: initialized
[ 0.241970] EVM: security.selinux
[ 0.241972] EVM: security.SMACK64
[ 0.241973] EVM: security.ima
[ 0.241974] EVM: security.capability
[ 0.242022] PM: Registering ACPI NVS region [mem 0xbf371000-0xbf3f1fff] (528384 bytes)
[ 0.242031] PM: Registering ACPI NVS region [mem 0xbf668000-0xbf6e7fff] (524288 bytes)
[ 0.242039] PM: Registering ACPI NVS region [mem 0xbf76c000-0xbf777fff] (49152 bytes)
[ 0.242040] PM: Registering ACPI NVS region [mem 0xbf77b000-0xbf78afff] (65536 bytes)
[ 0.242043] PM: Registering ACPI NVS region [mem 0xbf78c000-0xbf79efff] (77824 bytes)
[ 0.242923] pinctrl core: initialized pinctrl subsystem
[ 0.242985] regulator-dummy: no parameters
[ 0.243018] RTC time: 23:08:13, date: 03/10/15
[ 0.243053] NET: Registered protocol family 16
[ 0.243156] cpuidle: using governor ladder
[ 0.243157] cpuidle: using governor menu
[ 0.243191] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[ 0.243193] ACPI: bus type PCI registered
[ 0.243195] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.243248] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.243250] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[ 0.271723] PCI: Using configuration type 1 for base access
[ 0.272591] bio: create slab <bio-0> at 0
[ 0.272730] ACPI: Added _OSI(Module Device)
[ 0.272732] ACPI: Added _OSI(Processor Device)
[ 0.272733] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.272734] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.273940] ACPI : EC: EC description table is found, configuring boot EC
[ 0.277512] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[ 0.364522] ACPI: SSDT 00000000bf71aa18 0004B1 (v01 PmRef Cpu0Ist 00003000 INTL 20061109)
[ 0.364812] ACPI: Dynamic OEM Table Load:
[ 0.364814] ACPI: SSDT (null) 0004B1 (v01 PmRef Cpu0Ist 00003000 INTL 20061109)
[ 0.364907] ACPI: SSDT 00000000bf718718 0006B2 (v01 PmRef Cpu0Cst 00003001 INTL 20061109)
[ 0.365204] ACPI: Dynamic OEM Table Load:
[ 0.365205] ACPI: SSDT (null) 0006B2 (v01 PmRef Cpu0Cst 00003001 INTL 20061109)
[ 0.369530] ACPI: SSDT 00000000bf719a98 000303 (v01 PmRef ApIst 00003000 INTL 20061109)
[ 0.369855] ACPI: Dynamic OEM Table Load:
[ 0.369857] ACPI: SSDT (null) 000303 (v01 PmRef ApIst 00003000 INTL 20061109)
[ 0.373415] ACPI: SSDT 00000000bf717d98 000119 (v01 PmRef ApCst 00003000 INTL 20061109)
[ 0.373714] ACPI: Dynamic OEM Table Load:
[ 0.373716] ACPI: SSDT (null) 000119 (v01 PmRef ApCst 00003000 INTL 20061109)
[ 0.378807] ACPI: Interpreter enabled
[ 0.378813] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20131115/hwxface-580)
[ 0.378817] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20131115/hwxface-580)
[ 0.378829] ACPI: (supports S0 S3 S4 S5)
[ 0.378830] ACPI: Using IOAPIC for interrupt routing
[ 0.378852] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.379543] ACPI: ACPI Dock Station Driver: 2 docks/bays found
[ 0.387010] ACPI: Power Resource [PUBS] (on)
[ 0.391417] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11)
[ 0.391492] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 *11)
[ 0.391550] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 11) *0, disabled.
[ 0.391624] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11)
[ 0.391697] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 *11)
[ 0.391770] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 *11)
[ 0.391827] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 11) *0, disabled.
[ 0.391901] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 *11)
[ 0.391935] ACPI: PCI Root Bridge [UNCR] (domain 0000 [bus ff])
[ 0.391941] acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 0.391944] acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
[ 0.391984] PCI host bridge to bus 0000:ff
[ 0.391987] pci_bus 0000:ff: root bus resource [bus ff]
[ 0.391993] pci 0000:ff:00.0: [8086:2c62] type 00 class 0x060000
[ 0.392034] pci 0000:ff:00.1: [8086:2d01] type 00 class 0x060000
[ 0.392070] pci 0000:ff:02.0: [8086:2d10] type 00 class 0x060000
[ 0.392103] pci 0000:ff:02.1: [8086:2d11] type 00 class 0x060000
[ 0.392135] pci 0000:ff:02.2: [8086:2d12] type 00 class 0x060000
[ 0.392169] pci 0000:ff:02.3: [8086:2d13] type 00 class 0x060000
[ 0.392226] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
[ 0.392229] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 0.392376] acpi PNP0A08:00: _OSC: platform does not support [PCIeCapability]
[ 0.392444] acpi PNP0A08:00: _OSC: not requesting control; platform does not support [PCIeCapability]
[ 0.392447] acpi PNP0A08:00: _OSC: OS requested [PCIeHotplug PME AER PCIeCapability]
[ 0.392449] acpi PNP0A08:00: _OSC: platform willing to grant [PCIeHotplug PME AER]
[ 0.392450] acpi PNP0A08:00: _OSC failed (AE_SUPPORT); disabling ASPM
[ 0.392604] PCI host bridge to bus 0000:00
[ 0.392606] pci_bus 0000:00: root bus resource [bus 00-fe]
[ 0.392608] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
[ 0.392610] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
[ 0.392611] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[ 0.392613] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff]
[ 0.392614] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff]
[ 0.392616] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xfebfffff]
[ 0.392622] pci 0000:00:00.0: [8086:0044] type 00 class 0x060000
[ 0.392636] DMAR: BIOS has allocated no shadow GTT; disabling IOMMU for graphics
[ 0.392686] pci 0000:00:01.0: [8086:0045] type 01 class 0x060400
[ 0.392715] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 0.392802] pci 0000:00:16.0: [8086:3b64] type 00 class 0x078000
[ 0.392831] pci 0000:00:16.0: reg 0x10: [mem 0xf2427800-0xf242780f 64bit]
[ 0.392925] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[ 0.392991] pci 0000:00:16.3: [8086:3b67] type 00 class 0x070002
[ 0.393015] pci 0000:00:16.3: reg 0x10: [io 0x1800-0x1807]
[ 0.393027] pci 0000:00:16.3: reg 0x14: [mem 0xf2424000-0xf2424fff]
[ 0.393188] pci 0000:00:19.0: [8086:10ea] type 00 class 0x020000
[ 0.393212] pci 0000:00:19.0: reg 0x10: [mem 0xf2400000-0xf241ffff]
[ 0.393223] pci 0000:00:19.0: reg 0x14: [mem 0xf2425000-0xf2425fff]
[ 0.393234] pci 0000:00:19.0: reg 0x18: [io 0x1820-0x183f]
[ 0.393327] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
[ 0.393363] pci 0000:00:19.0: System wakeup disabled by ACPI
[ 0.393399] pci 0000:00:1a.0: [8086:3b3c] type 00 class 0x0c0320
[ 0.393424] pci 0000:00:1a.0: reg 0x10: [mem 0xf2428000-0xf24283ff]
[ 0.393533] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[ 0.393569] pci 0000:00:1a.0: System wakeup disabled by ACPI
[ 0.393605] pci 0000:00:1b.0: [8086:3b56] type 00 class 0x040300
[ 0.393626] pci 0000:00:1b.0: reg 0x10: [mem 0xf2420000-0xf2423fff 64bit]
[ 0.393719] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.393762] pci 0000:00:1b.0: System wakeup disabled by ACPI
[ 0.393795] pci 0000:00:1c.0: [8086:3b42] type 01 class 0x060400
[ 0.393893] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.393932] pci 0000:00:1c.0: System wakeup disabled by ACPI
[ 0.393964] pci 0000:00:1c.1: [8086:3b44] type 01 class 0x060400
[ 0.394062] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 0.394103] pci 0000:00:1c.1: System wakeup disabled by ACPI
[ 0.394138] pci 0000:00:1c.3: [8086:3b48] type 01 class 0x060400
[ 0.394236] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[ 0.394275] pci 0000:00:1c.3: System wakeup disabled by ACPI
[ 0.394307] pci 0000:00:1c.4: [8086:3b4a] type 01 class 0x060400
[ 0.394404] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[ 0.394443] pci 0000:00:1c.4: System wakeup disabled by ACPI
[ 0.394483] pci 0000:00:1d.0: [8086:3b34] type 00 class 0x0c0320
[ 0.394508] pci 0000:00:1d.0: reg 0x10: [mem 0xf2428400-0xf24287ff]
[ 0.394615] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ 0.394651] pci 0000:00:1d.0: System wakeup disabled by ACPI
[ 0.394681] pci 0000:00:1e.0: [8086:2448] type 01 class 0x060401
[ 0.394800] pci 0000:00:1f.0: [8086:3b07] type 00 class 0x060100
[ 0.394960] pci 0000:00:1f.2: [8086:3b2f] type 00 class 0x010601
[ 0.394986] pci 0000:00:1f.2: reg 0x10: [io 0x1818-0x181f]
[ 0.394997] pci 0000:00:1f.2: reg 0x14: [io 0x180c-0x180f]
[ 0.395007] pci 0000:00:1f.2: reg 0x18: [io 0x1810-0x1817]
[ 0.395018] pci 0000:00:1f.2: reg 0x1c: [io 0x1808-0x180b]
[ 0.395028] pci 0000:00:1f.2: reg 0x20: [io 0x1840-0x185f]
[ 0.395039] pci 0000:00:1f.2: reg 0x24: [mem 0xf2427000-0xf24277ff]
[ 0.395105] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.395165] pci 0000:00:1f.3: [8086:3b30] type 00 class 0x0c0500
[ 0.395186] pci 0000:00:1f.3: reg 0x10: [mem 0xf2428800-0xf24288ff 64bit]
[ 0.395214] pci 0000:00:1f.3: reg 0x20: [io 0x1860-0x187f]
[ 0.395295] pci 0000:00:1f.6: [8086:3b32] type 00 class 0x118000
[ 0.395323] pci 0000:00:1f.6: reg 0x10: [mem 0xf2426000-0xf2426fff 64bit]
[ 0.395501] pci 0000:01:00.0: [10de:0a6c] type 00 class 0x030000
[ 0.395514] pci 0000:01:00.0: reg 0x10: [mem 0xcc000000-0xccffffff]
[ 0.395527] pci 0000:01:00.0: reg 0x14: [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.395539] pci 0000:01:00.0: reg 0x1c: [mem 0xce000000-0xcfffffff 64bit pref]
[ 0.395548] pci 0000:01:00.0: reg 0x24: [io 0x2000-0x207f]
[ 0.395557] pci 0000:01:00.0: reg 0x30: [mem 0x00000000-0x0007ffff pref]
[ 0.395649] pci 0000:01:00.1: [10de:0be3] type 00 class 0x040300
[ 0.395661] pci 0000:01:00.1: reg 0x10: [mem 0xcdefc000-0xcdefffff]
[ 0.395797] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.395799] pci 0000:00:01.0: bridge window [io 0x2000-0x2fff]
[ 0.395802] pci 0000:00:01.0: bridge window [mem 0xcc000000-0xcdefffff]
[ 0.395805] pci 0000:00:01.0: bridge window [mem 0xce000000-0xdfffffff 64bit pref]
[ 0.395865] pci 0000:00:1c.0: PCI bridge to [bus 02]
[ 0.395954] pci 0000:03:00.0: [10ec:8172] type 00 class 0x028000
[ 0.395971] pci 0000:03:00.0: reg 0x10: [io 0x3000-0x30ff]
[ 0.395983] pci 0000:03:00.0: reg 0x14: [mem 0xf2000000-0xf2003fff]
[ 0.396086] pci 0000:03:00.0: supports D1 D2
[ 0.396087] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot
[ 0.401314] pci 0000:00:1c.1: PCI bridge to [bus 03]
[ 0.401323] pci 0000:00:1c.1: bridge window [io 0x3000-0x3fff]
[ 0.401330] pci 0000:00:1c.1: bridge window [mem 0xf2000000-0xf20fffff]
[ 0.401435] acpiphp: Slot [1] registered
[ 0.401442] pci 0000:00:1c.3: PCI bridge to [bus 05-0c]
[ 0.401447] pci 0000:00:1c.3: bridge window [io 0x4000-0x4fff]
[ 0.401451] pci 0000:00:1c.3: bridge window [mem 0xf0000000-0xf1ffffff]
[ 0.401458] pci 0000:00:1c.3: bridge window [mem 0xf2500000-0xf25fffff 64bit pref]
[ 0.401589] pci 0000:0d:00.0: [1180:e822] type 00 class 0x080500
[ 0.401607] pci 0000:0d:00.0: MMC controller base frequency changed to 50Mhz.
[ 0.401629] pci 0000:0d:00.0: reg 0x10: [mem 0xf2100000-0xf21000ff]
[ 0.401788] pci 0000:0d:00.0: supports D1 D2
[ 0.401790] pci 0000:0d:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.401913] pci 0000:0d:00.1: [1180:e230] type 00 class 0x088000
[ 0.401936] pci 0000:0d:00.1: reg 0x10: [mem 0xf2100400-0xf21004ff]
[ 0.402095] pci 0000:0d:00.1: supports D1 D2
[ 0.402097] pci 0000:0d:00.1: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.402214] pci 0000:0d:00.3: [1180:e832] type 00 class 0x0c0010
[ 0.402236] pci 0000:0d:00.3: reg 0x10: [mem 0xf2100800-0xf2100fff]
[ 0.402397] pci 0000:0d:00.3: supports D1 D2
[ 0.402398] pci 0000:0d:00.3: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.409375] pci 0000:00:1c.4: PCI bridge to [bus 0d]
[ 0.409383] pci 0000:00:1c.4: bridge window [mem 0xf2100000-0xf21fffff]
[ 0.409465] pci 0000:00:1e.0: PCI bridge to [bus 0e] (subtractive decode)
[ 0.409478] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
[ 0.409479] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
[ 0.409481] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 0.409483] pci 0000:00:1e.0: bridge window [mem 0x000d4000-0x000d7fff] (subtractive decode)
[ 0.409484] pci 0000:00:1e.0: bridge window [mem 0x000d8000-0x000dbfff] (subtractive decode)
[ 0.409486] pci 0000:00:1e.0: bridge window [mem 0xc0000000-0xfebfffff] (subtractive decode)
[ 0.410793] ACPI: Enabled 3 GPEs in block 00 to 3F
[ 0.410803] ACPI: \_SB_.UNCR: notify handler is installed
[ 0.410805] ACPI: \_SB_.PCI0: notify handler is installed
[ 0.410841] Found 2 acpi root devices
[ 0.410893] ACPI : EC: GPE = 0x11, I/O: command/status = 0x66, data = 0x62
[ 0.411007] vgaarb: setting as boot device: PCI:0000:01:00.0
[ 0.411009] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.411011] vgaarb: loaded
[ 0.411012] vgaarb: bridge control possible 0000:01:00.0
[ 0.411164] SCSI subsystem initialized
[ 0.411220] libata version 3.00 loaded.
[ 0.411239] ACPI: bus type USB registered
[ 0.411253] usbcore: registered new interface driver usbfs
[ 0.411261] usbcore: registered new interface driver hub
[ 0.411281] usbcore: registered new device driver usb
[ 0.411373] PCI: Using ACPI for IRQ routing
[ 0.421082] PCI: pci_cache_line_size set to 64 bytes
[ 0.421258] e820: reserve RAM buffer [mem 0x0009e800-0x0009ffff]
[ 0.421259] e820: reserve RAM buffer [mem 0xbf27c000-0xbfffffff]
[ 0.421262] e820: reserve RAM buffer [mem 0xbf35f000-0xbfffffff]
[ 0.421264] e820: reserve RAM buffer [mem 0xbf46f000-0xbfffffff]
[ 0.421266] e820: reserve RAM buffer [mem 0xbf717000-0xbfffffff]
[ 0.421268] e820: reserve RAM buffer [mem 0xbf76c000-0xbfffffff]
[ 0.421269] e820: reserve RAM buffer [mem 0xbf800000-0xbfffffff]
[ 0.421353] NetLabel: Initializing
[ 0.421355] NetLabel: domain hash size = 128
[ 0.421355] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.421369] NetLabel: unlabeled traffic allowed by default
[ 0.421438] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ 0.421443] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[ 0.423476] Switched to clocksource hpet
[ 0.427859] AppArmor: AppArmor Filesystem Enabled
[ 0.427893] pnp: PnP ACPI init
[ 0.427908] ACPI: bus type PNP registered
[ 0.429323] system 00:00: [mem 0x00000000-0x0009ffff] could not be reserved
[ 0.429326] system 00:00: [mem 0x000c0000-0x000c3fff] could not be reserved
[ 0.429328] system 00:00: [mem 0x000c4000-0x000c7fff] could not be reserved
[ 0.429330] system 00:00: [mem 0x000c8000-0x000cbfff] has been reserved
[ 0.429332] system 00:00: [mem 0x000cc000-0x000cffff] has been reserved
[ 0.429334] system 00:00: [mem 0x000d0000-0x000d3fff] could not be reserved
[ 0.429336] system 00:00: [mem 0x000dc000-0x000dffff] could not be reserved
[ 0.429338] system 00:00: [mem 0x000e0000-0x000e3fff] could not be reserved
[ 0.429339] system 00:00: [mem 0x000e4000-0x000e7fff] could not be reserved
[ 0.429341] system 00:00: [mem 0x000e8000-0x000ebfff] could not be reserved
[ 0.429343] system 00:00: [mem 0x000ec000-0x000effff] could not be reserved
[ 0.429345] system 00:00: [mem 0x000f0000-0x000fffff] could not be reserved
[ 0.429347] system 00:00: [mem 0x00100000-0xbfffffff] could not be reserved
[ 0.429349] system 00:00: [mem 0xfec00000-0xfed3ffff] could not be reserved
[ 0.429351] system 00:00: [mem 0xfed4c000-0xffffffff] could not be reserved
[ 0.429355] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.429666] system 00:01: [io 0x164e-0x164f] has been reserved
[ 0.429668] system 00:01: [io 0x1000-0x107f] could not be reserved
[ 0.429670] system 00:01: [io 0x1180-0x11ff] has been reserved
[ 0.429673] system 00:01: [io 0x0800-0x080f] has been reserved
[ 0.429674] system 00:01: [io 0x15e0-0x15ef] has been reserved
[ 0.429676] system 00:01: [io 0x1600-0x1641] has been reserved
[ 0.429678] system 00:01: [io 0x1644-0x167f] could not be reserved
[ 0.429680] system 00:01: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.429682] system 00:01: [mem 0xfeaff000-0xfeafffff] has been reserved
[ 0.429684] system 00:01: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.429686] system 00:01: [mem 0xfed10000-0xfed13fff] has been reserved
[ 0.429688] system 00:01: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.429690] system 00:01: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.429692] system 00:01: [mem 0xfed45000-0xfed4bfff] has been reserved
[ 0.429694] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.429736] pnp 00:02: Plug and Play ACPI device, IDs PNP0103 (active)
[ 0.429746] pnp 00:03: [dma 4]
[ 0.429761] pnp 00:03: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.429779] pnp 00:04: Plug and Play ACPI device, IDs PNP0800 (active)
[ 0.429812] pnp 00:05: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.429835] pnp 00:06: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.429858] pnp 00:07: Plug and Play ACPI device, IDs PNP0303 (active)
[ 0.429883] pnp 00:08: Plug and Play ACPI device, IDs LEN0015 PNP0f13 (active)
[ 0.430164] pnp 00:09: Plug and Play ACPI device, IDs SMO1200 PNP0c31 (active)
[ 0.430813] pnp: PnP ACPI: found 10 devices
[ 0.430815] ACPI: bus type PNP unregistered
[ 0.437705] pci 0000:01:00.0: BAR 6: assigned [mem 0xcd000000-0xcd07ffff pref]
[ 0.437709] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.437712] pci 0000:00:01.0: bridge window [io 0x2000-0x2fff]
[ 0.437714] pci 0000:00:01.0: bridge window [mem 0xcc000000-0xcdefffff]
[ 0.437717] pci 0000:00:01.0: bridge window [mem 0xce000000-0xdfffffff 64bit pref]
[ 0.437720] pci 0000:00:1c.0: PCI bridge to [bus 02]
[ 0.437734] pci 0000:00:1c.1: PCI bridge to [bus 03]
[ 0.437737] pci 0000:00:1c.1: bridge window [io 0x3000-0x3fff]
[ 0.437743] pci 0000:00:1c.1: bridge window [mem 0xf2000000-0xf20fffff]
[ 0.437753] pci 0000:00:1c.3: PCI bridge to [bus 05-0c]
[ 0.437756] pci 0000:00:1c.3: bridge window [io 0x4000-0x4fff]
[ 0.437762] pci 0000:00:1c.3: bridge window [mem 0xf0000000-0xf1ffffff]
[ 0.437767] pci 0000:00:1c.3: bridge window [mem 0xf2500000-0xf25fffff 64bit pref]
[ 0.437774] pci 0000:00:1c.4: PCI bridge to [bus 0d]
[ 0.437780] pci 0000:00:1c.4: bridge window [mem 0xf2100000-0xf21fffff]
[ 0.437790] pci 0000:00:1e.0: PCI bridge to [bus 0e]
[ 0.437804] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.437806] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.437808] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.437809] pci_bus 0000:00: resource 7 [mem 0x000d4000-0x000d7fff]
[ 0.437811] pci_bus 0000:00: resource 8 [mem 0x000d8000-0x000dbfff]
[ 0.437812] pci_bus 0000:00: resource 9 [mem 0xc0000000-0xfebfffff]
[ 0.437814] pci_bus 0000:01: resource 0 [io 0x2000-0x2fff]
[ 0.437816] pci_bus 0000:01: resource 1 [mem 0xcc000000-0xcdefffff]
[ 0.437818] pci_bus 0000:01: resource 2 [mem 0xce000000-0xdfffffff 64bit pref]
[ 0.437820] pci_bus 0000:03: resource 0 [io 0x3000-0x3fff]
[ 0.437821] pci_bus 0000:03: resource 1 [mem 0xf2000000-0xf20fffff]
[ 0.437823] pci_bus 0000:05: resource 0 [io 0x4000-0x4fff]
[ 0.437825] pci_bus 0000:05: resource 1 [mem 0xf0000000-0xf1ffffff]
[ 0.437826] pci_bus 0000:05: resource 2 [mem 0xf2500000-0xf25fffff 64bit pref]
[ 0.437828] pci_bus 0000:0d: resource 1 [mem 0xf2100000-0xf21fffff]
[ 0.437830] pci_bus 0000:0e: resource 4 [io 0x0000-0x0cf7]
[ 0.437832] pci_bus 0000:0e: resource 5 [io 0x0d00-0xffff]
[ 0.437833] pci_bus 0000:0e: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.437835] pci_bus 0000:0e: resource 7 [mem 0x000d4000-0x000d7fff]
[ 0.437836] pci_bus 0000:0e: resource 8 [mem 0x000d8000-0x000dbfff]
[ 0.437838] pci_bus 0000:0e: resource 9 [mem 0xc0000000-0xfebfffff]
[ 0.437868] NET: Registered protocol family 2
[ 0.438075] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.438233] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.438420] TCP: Hash tables configured (established 65536 bind 65536)
[ 0.438453] TCP: reno registered
[ 0.438463] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.438497] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.438578] NET: Registered protocol family 1
[ 0.438891] pci 0000:01:00.0: Video device with shadowed ROM
[ 0.438963] PCI: CLS 64 bytes, default 64
[ 0.439029] Trying to unpack rootfs image as initramfs...
[ 0.716383] Freeing initrd memory: 18484K (ffff880035bd6000 - ffff880036de3000)
[ 0.716390] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.716392] software IO TLB [mem 0xbb27c000-0xbf27c000] (64MB) mapped at [ffff8800bb27c000-ffff8800bf27bfff]
[ 0.716469] Simple Boot Flag at 0x35 set to 0x1
[ 0.716653] microcode: CPU0 sig=0x20655, pf=0x10, revision=0x3
[ 0.716659] microcode: CPU1 sig=0x20655, pf=0x10, revision=0x3
[ 0.716664] microcode: CPU2 sig=0x20655, pf=0x10, revision=0x3
[ 0.716670] microcode: CPU3 sig=0x20655, pf=0x10, revision=0x3
[ 0.716736] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[ 0.716738] Scanning for low memory corruption every 60 seconds
[ 0.717013] Initialise system trusted keyring
[ 0.717057] audit: initializing netlink socket (disabled)
[ 0.717071] type=2000 audit(1426028893.520:1): initialized
[ 0.742218] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.743392] zbud: loaded
[ 0.743540] VFS: Disk quotas dquot_6.5.2
[ 0.743577] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.743997] fuse init (API version 7.22)
[ 0.744070] msgmni has been set to 15684
[ 0.744117] Key type big_key registered
[ 0.744681] Key type asymmetric registered
[ 0.744683] Asymmetric key parser 'x509' registered
[ 0.744711] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 0.744755] io scheduler noop registered
[ 0.744756] io scheduler deadline registered (default)
[ 0.744778] io scheduler cfq registered
[ 0.744961] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
[ 0.745377] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.745392] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.745424] vesafb: mode is 640x480x32, linelength=2560, pages=0
[ 0.745426] vesafb: scrolling: redraw
[ 0.745427] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 0.745582] vesafb: framebuffer at 0xcf000000, mapped to 0xffffc90010e80000, using 1216k, total 1216k
[ 0.778867] Console: switching to colour frame buffer device 80x30
[ 0.812123] fb0: VESA VGA frame buffer device
[ 0.812136] intel_idle: MWAIT substates: 0x1120
[ 0.812138] intel_idle: v0.4 model 0x25
[ 0.812139] intel_idle: lapic_timer_reliable_states 0xffffffff
[ 0.812248] ipmi message handler version 39.2
[ 0.812543] ACPI: Deprecated procfs I/F for AC is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
[ 0.812831] ACPI: AC Adapter [AC] (on-line)
[ 0.812921] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input0
[ 0.813112] ACPI: Lid Switch [LID]
[ 0.813204] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input1
[ 0.813211] ACPI: Sleep Button [SLPB]
[ 0.813343] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[ 0.813349] ACPI: Power Button [PWRF]
[ 0.819000] thermal LNXTHERM:00: registered as thermal_zone0
[ 0.819006] ACPI: Thermal Zone [THM0] (57 C)
[ 0.819048] GHES: HEST is not enabled!
[ 0.819204] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[ 0.842756] 0000:00:16.3: ttyS4 at I/O 0x1800 (irq = 17, base_baud = 115200) is a 16550A
[ 0.843403] Linux agpgart interface v0.103
[ 0.843716] tpm_tis 00:09: 1.2 TPM (device-id 0x0, rev-id 78)
[ 0.860506] ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
[ 0.860517] ACPI: Battery Slot [BAT0] (battery present)
[ 0.903350] tpm_tis 00:09: TPM is disabled/deactivated (0x6)
[ 0.906884] brd: module loaded
[ 0.908405] loop: module loaded
[ 0.909030] libphy: Fixed MDIO Bus: probed
[ 0.909181] tun: Universal TUN/TAP device driver, 1.6
[ 0.909184] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 0.909289] PPP generic driver version 2.4.2
[ 0.909389] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.909404] ehci-pci: EHCI PCI platform driver
[ 0.909576] ehci-pci 0000:00:1a.0: EHCI Host Controller
[ 0.909587] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
[ 0.909609] ehci-pci 0000:00:1a.0: debug port 2
[ 0.913560] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
[ 0.913589] ehci-pci 0000:00:1a.0: irq 23, io mem 0xf2428000
[ 0.923230] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[ 0.923351] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.923355] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.923359] usb usb1: Product: EHCI Host Controller
[ 0.923362] usb usb1: Manufacturer: Linux 3.13.0-46-generic ehci_hcd
[ 0.923365] usb usb1: SerialNumber: 0000:00:1a.0
[ 0.923681] hub 1-0:1.0: USB hub found
[ 0.923698] hub 1-0:1.0: 3 ports detected
[ 0.924023] ehci-pci 0000:00:1d.0: EHCI Host Controller
[ 0.924033] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 0.924053] ehci-pci 0000:00:1d.0: debug port 2
[ 0.927991] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[ 0.928017] ehci-pci 0000:00:1d.0: irq 19, io mem 0xf2428400
[ 0.939303] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[ 0.939422] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.939426] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.939430] usb usb2: Product: EHCI Host Controller
[ 0.939433] usb usb2: Manufacturer: Linux 3.13.0-46-generic ehci_hcd
[ 0.939435] usb usb2: SerialNumber: 0000:00:1d.0
[ 0.939703] hub 2-0:1.0: USB hub found
[ 0.939720] hub 2-0:1.0: 3 ports detected
[ 0.939880] ehci-platform: EHCI generic platform driver
[ 0.939892] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.939894] ohci-pci: OHCI PCI platform driver
[ 0.939907] ohci-platform: OHCI generic platform driver
[ 0.939916] uhci_hcd: USB Universal Host Controller Interface driver
[ 0.939999] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
[ 0.943391] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.943395] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.943595] mousedev: PS/2 mouse device common for all mice
[ 0.943900] rtc_cmos 00:06: RTC can wake from S4
[ 0.944065] rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
[ 0.944096] rtc_cmos 00:06: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 0.944150] device-mapper: uevent: version 1.0.3
[ 0.944253] device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@redhat.com
[ 0.944259] ledtrig-cpu: registered to indicate activity on CPUs
[ 0.944351] TCP: cubic registered
[ 0.944421] NET: Registered protocol family 10
[ 0.944582] NET: Registered protocol family 17
[ 0.944592] Key type dns_resolver registered
[ 0.944947] Loading compiled-in X.509 certificates
[ 0.945787] Loaded X.509 cert 'Magrathea: Glacier signing key: fc0e53547bf79fb590697a6fdc33445a64c9e874'
[ 0.945801] registered taskstats version 1
[ 0.947981] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
[ 0.948944] Key type trusted registered
[ 0.954691] Key type encrypted registered
[ 0.954699] AppArmor: AppArmor sha1 policy hashing enabled
[ 0.963320] tpm_tis 00:09: A TPM error (6) occurred attempting to read a pcr value
[ 0.963325] IMA: No TPM chip found, activating TPM-bypass!
[ 0.964084] regulator-dummy: disabling
[ 0.964405] Magic number: 7:238:150
[ 0.964431] bdi 1:2: hash matches
[ 0.964594] rtc_cmos 00:06: setting system clock to 2015-03-10 23:08:14 UTC (1426028894)
[ 0.969390] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 0.969392] EDD information not available.
[ 0.969451] PM: Hibernation image not present or could not be loaded.
[ 0.970675] Freeing unused kernel memory: 1360K (ffffffff81d1e000 - ffffffff81e72000)
[ 0.970677] Write protecting the kernel read-only data: 12288k
[ 0.972194] Freeing unused kernel memory: 556K (ffff880001775000 - ffff880001800000)
[ 0.973614] Freeing unused kernel memory: 604K (ffff880001b69000 - ffff880001c00000)
[ 0.991057] udevd[114]: starting version 175
[ 1.019005] pps_core: LinuxPPS API ver. 1 registered
[ 1.019009] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 1.020618] PTP clock support registered
[ 1.038479] ahci 0000:00:1f.2: version 3.0
[ 1.038649] ahci 0000:00:1f.2: irq 41 for MSI/MSI-X
[ 1.038698] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled
[ 1.038749] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 3 Gbps 0x33 impl SATA mode
[ 1.038753] ahci 0000:00:1f.2: flags: 64bit ncq sntf ilck stag pm led clo pio slum part ems sxs apst
[ 1.060811] e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k
[ 1.060815] e1000e: Copyright(c) 1999 - 2013 Intel Corporation.
[ 1.063521] sdhci: Secure Digital Host Controller Interface driver
[ 1.063524] sdhci: Copyright(c) Pierre Ossman
[ 1.065827] sdhci-pci 0000:0d:00.0: SDHCI controller found [1180:e822] (rev 1)
[ 1.066093] sdhci-pci 0000:0d:00.0: Will use DMA mode even though HW doesn't fully claim to support it.
[ 1.066100] sdhci-pci 0000:0d:00.0: dummy supplies not allowed
[ 1.066102] mmc0: no vqmmc regulator found
[ 1.066104] sdhci-pci 0000:0d:00.0: dummy supplies not allowed
[ 1.066106] mmc0: no vmmc regulator found
[ 1.067193] sdhci-pci 0000:0d:00.0: Will use DMA mode even though HW doesn't fully claim to support it.
[ 1.067365] mmc0: SDHCI controller on PCI [0000:0d:00.0] using DMA
[ 1.072697] scsi0 : ahci
[ 1.072923] scsi1 : ahci
[ 1.074094] scsi2 : ahci
[ 1.074196] scsi3 : ahci
[ 1.074273] scsi4 : ahci
[ 1.074380] scsi5 : ahci
[ 1.074433] ata1: SATA max UDMA/133 abar m2048@0xf2427000 port 0xf2427100 irq 41
[ 1.074437] ata2: SATA max UDMA/133 abar m2048@0xf2427000 port 0xf2427180 irq 41
[ 1.074438] ata3: DUMMY
[ 1.074440] ata4: DUMMY
[ 1.074444] ata5: SATA max UDMA/133 abar m2048@0xf2427000 port 0xf2427300 irq 41
[ 1.074447] ata6: SATA max UDMA/133 abar m2048@0xf2427000 port 0xf2427380 irq 41
[ 1.074682] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
[ 1.074713] e1000e 0000:00:19.0: irq 42 for MSI/MSI-X
[ 1.131175] firewire_ohci 0000:0d:00.3: added OHCI v1.10 device as card 0, 4 IR + 4 IT contexts, quirks 0x11
[ 1.132601] sdhci-pci 0000:0d:00.0: Will use DMA mode even though HW doesn't fully claim to support it.
[ 1.196757] sdhci-pci 0000:0d:00.0: Will use DMA mode even though HW doesn't fully claim to support it.
[ 1.235130] usb 1-1: new high-speed USB device number 2 using ehci-pci
[ 1.262279] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) f0:de:f1:0b:72:f5
[ 1.262282] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection
[ 1.262350] e1000e 0000:00:19.0 eth0: MAC: 9, PHY: 10, PBA No: A002FF-0FF
[ 1.264707] sdhci-pci 0000:0d:00.0: Will use DMA mode even though HW doesn't fully claim to support it.
[ 1.332225] sdhci-pci 0000:0d:00.0: Will use DMA mode even though HW doesn't fully claim to support it.
[ 1.367458] usb 1-1: New USB device found, idVendor=8087, idProduct=0020
[ 1.367463] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 1.367852] hub 1-1:1.0: USB hub found
[ 1.368066] hub 1-1:1.0: 6 ports detected
[ 1.395084] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.397581] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[ 1.397589] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[ 1.397594] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[ 1.400187] ata1.00: ATA-8: WDC WD7500BPKT-75PK4T0, 01.01A01, max UDMA/133
[ 1.400193] ata1.00: 1465149168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 1.402856] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[ 1.402862] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[ 1.402866] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[ 1.405430] ata1.00: configured for UDMA/133
[ 1.405787] scsi 0:0:0:0: Direct-Access ATA WDC WD7500BPKT-7 01.0 PQ: 0 ANSI: 5
[ 1.406046] sd 0:0:0:0: [sda] 1465149168 512-byte logical blocks: (750 GB/698 GiB)
[ 1.406054] sd 0:0:0:0: [sda] 4096-byte physical blocks
[ 1.406062] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 1.406135] sd 0:0:0:0: [sda] Write Protect is off
[ 1.406138] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.406174] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.479070] usb 2-1: new high-speed USB device number 2 using ehci-pci
[ 1.542639] sda: sda1 sda2 sda3 < sda5 sda6 sda7 sda8 sda9 sda10 >
[ 1.543497] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.611517] usb 2-1: New USB device found, idVendor=8087, idProduct=0020
[ 1.611523] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 1.612212] hub 2-1:1.0: USB hub found
[ 1.612485] hub 2-1:1.0: 8 ports detected
[ 1.631030] firewire_core 0000:0d:00.3: created device fw0: GUID f0def1ff0b72f5ff, S400
[ 1.687030] usb 1-1.1: new low-speed USB device number 3 using ehci-pci
[ 1.714871] tsc: Refined TSC clocksource calibration: 2526.999 MHz
[ 1.722839] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.724265] ata2.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[ 1.724273] ata2.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[ 1.724444] ata2.00: ACPI cmd ef/5f:00:00:00:00:a0 (SET FEATURES) rejected by device (Stat=0x51 Err=0x04)
[ 1.724755] ata2.00: supports DRM functions and may not be fully accessible
[ 1.727677] ata2.00: disabling queued TRIM support
[ 1.727682] ata2.00: ATA-9: Crucial_CT240M500SSD1, MU05, max UDMA/133
[ 1.727685] ata2.00: 468862128 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 1.732430] ata2.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[ 1.732437] ata2.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[ 1.732600] ata2.00: ACPI cmd ef/5f:00:00:00:00:a0 (SET FEATURES) rejected by device (Stat=0x51 Err=0x04)
[ 1.732993] ata2.00: supports DRM functions and may not be fully accessible
[ 1.735922] ata2.00: disabling queued TRIM support
[ 1.739179] ata2.00: configured for UDMA/133
[ 1.739612] scsi 1:0:0:0: Direct-Access ATA Crucial_CT240M50 MU05 PQ: 0 ANSI: 5
[ 1.739826] sd 1:0:0:0: [sdb] 468862128 512-byte logical blocks: (240 GB/223 GiB)
[ 1.739829] sd 1:0:0:0: [sdb] 4096-byte physical blocks
[ 1.739844] sd 1:0:0:0: Attached scsi generic sg1 type 0
[ 1.739903] sd 1:0:0:0: [sdb] Write Protect is off
[ 1.739906] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 1.739926] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.741306] sdb: sdb1 sdb2 sdb3 < sdb5 sdb6 sdb7 sdb8 >
[ 1.741911] sd 1:0:0:0: [sdb] Attached SCSI disk
[ 1.783730] usb 1-1.1: New USB device found, idVendor=046d, idProduct=c077
[ 1.783735] usb 1-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 1.783738] usb 1-1.1: Product: USB Optical Mouse
[ 1.783741] usb 1-1.1: Manufacturer: Logitech
[ 1.788319] hidraw: raw HID events driver (C) Jiri Kosina
[ 1.791671] usbcore: registered new interface driver usbhid
[ 1.791673] usbhid: USB HID core driver
[ 1.794124] input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.1/1-1.1:1.0/input/input5
[ 1.794262] hid-generic 0003:046D:C077.0001: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:00:1a.0-1.1/input0
[ 1.854934] usb 1-1.3: new full-speed USB device number 4 using ehci-pci
[ 1.948253] usb 1-1.3: New USB device found, idVendor=147e, idProduct=2016
[ 1.948260] usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 1.948264] usb 1-1.3: Product: Biometric Coprocessor
[ 1.948267] usb 1-1.3: Manufacturer: UPEK
[ 2.018863] usb 1-1.6: new high-speed USB device number 5 using ehci-pci
[ 2.058675] ata5: SATA link down (SStatus 0 SControl 300)
[ 2.116678] usb 1-1.6: New USB device found, idVendor=17ef, idProduct=480f
[ 2.116684] usb 1-1.6: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.116688] usb 1-1.6: Product: Integrated Camera
[ 2.116692] usb 1-1.6: Manufacturer: Chicony Electronics Co., Ltd.
[ 2.190853] usb 2-1.1: new high-speed USB device number 3 using ehci-pci
[ 2.287376] usb 2-1.1: New USB device found, idVendor=05ac, idProduct=12a8
[ 2.287383] usb 2-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 2.287386] usb 2-1.1: Product: iPhone
[ 2.287390] usb 2-1.1: Manufacturer: Apple Inc.
[ 2.287393] usb 2-1.1: SerialNumber: d5fffc1d219bf6a02dd839b2c1602a5d6e509de1
[ 2.378505] ata6: SATA link down (SStatus 0 SControl 300)
[ 2.425388] EXT4-fs (sdb7): mounted filesystem with ordered data mode. Opts: (null)
[ 2.559198] random: init urandom read with 77 bits of entropy available
[ 2.598885] init: ureadahead main process (382) terminated with status 5
[ 2.652210] Adding 7999484k swap on /dev/sdb6. Priority:-1 extents:1 across:7999484k SSFS
[ 2.681526] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 2.687163] udevd[461]: starting version 175
[ 2.693477] init: procps (virtual-filesystems) main process (450) terminated with status 255
[ 2.695772] init: udevtrigger main process (466) terminated with status 1
[ 2.698382] init: udevtrigger post-stop process (471) terminated with status 1
[ 2.714861] Switched to clocksource tsc
[ 2.724195] lp: driver loaded but no devices found
[ 2.738814] EXT4-fs (sdb7): re-mounted. Opts: errors=remount-ro
[ 2.784987] EXT4-fs (sdb5): mounted filesystem with ordered data mode. Opts: (null)
[ 2.799849] EXT4-fs (sdb8): mounted filesystem with ordered data mode. Opts: (null)
[ 2.845198] random: nonblocking pool is initialized


页首
 用户资料  
 
13 楼 
 文章标题 : Re: 12.04内核3.13.0.44升级后0.46后无法进入系统
帖子发表于 : 2015-03-11 10:12 

注册: 2009-08-04 16:33
帖子: 16882
送出感谢: 21
接收感谢: 1825
引用:
系统安装在SSD上,
/etc/fstab 添加了一行配置: # in start mount /dev/sda9 /media/public ntfs defaults,locale=zh_CN.UTF-8 0 0

改為
/dev/sda9 /public ntfs defaults,locale=zh_CN.UTF-8 0 0
試試


页首
 用户资料  
 
14 楼 
 文章标题 : Re: 12.04内核3.13.0.44升级后0.46后无法进入系统
帖子发表于 : 2015-03-11 21:39 
头像

注册: 2013-03-08 0:26
帖子: 32
系统: ubuntu(x64)
送出感谢: 1
接收感谢: 0 次
poloshiao 写道:
引用:
系统安装在SSD上,
/etc/fstab 添加了一行配置: # in start mount /dev/sda9 /media/public ntfs defaults,locale=zh_CN.UTF-8 0 0

改為
/dev/sda9 /public ntfs defaults,locale=zh_CN.UTF-8 0 0
試試


谢谢,还是不行。!~ 算了 我打算晚上全部拷贝出来。工作上的事情等不及了,重新安装了。
谢谢各位!


页首
 用户资料  
 
显示帖子 :  排序  
发表新帖 回复这个主题  [ 14 篇帖子 ] 

当前时区为 UTC + 8 小时


在线用户

正在浏览此版面的用户:没有注册用户 和 2 位游客


不能 在这个版面发表主题
不能 在这个版面回复主题
不能 在这个版面编辑帖子
不能 在这个版面删除帖子
不能 在这个版面提交附件

前往 :  
本站点为公益性站点,用于推广开源自由软件,由 DiaHosting VPSBudgetVM VPS 提供服务。
我们认为:软件应可免费取得,软件工具在各种语言环境下皆可使用,且不会有任何功能上的差异;
人们应有定制和修改软件的自由,且方式不受限制,只要他们自认为合适。

Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
简体中文语系由 王笑宇 翻译