[分享]提升ati商业驱动在compiz下的性能,3/21 更新

声卡/显卡/打印机/USB设备等硬件问题(网卡问题请发上面的网卡板块)
头像
zhuqin_83
帖子: 10606
注册时间: 2006-05-13 4:02
送出感谢: 0
接收感谢: 7 次
联系:

#31

帖子 zhuqin_83 » 2008-06-28 10:27

skyx 写了:楼主犹如暗黑世界的明灯指引着我
楼主的帖子,让我坚信:下一台电脑,我一定告别黑暗的nvidia,投向缤纷灿烂的ati显卡世界。
好样不学。
HP Pavilion DV6-2064CA: AMD Turion II Ultra Dual-Core Mobile M640, HD4650, 2GBx2 DDR2-800, Seagate 500GB 7200RPM SATA, BD-ROM
DELL UltraSharp 2209WA
Arch64, Testing repo
头像
skyx
论坛版主
帖子: 9203
注册时间: 2006-12-23 13:46
来自: Azores Islands
送出感谢: 0
接收感谢: 1 次
联系:

#32

帖子 skyx » 2008-07-01 17:40

楼主的出现,好像漫漫黑夜中的一盏明灯
又像茫茫大海中的一个浮标,
.................
no security measure is worth anything if an attacker has physical access to the machine
头像
zhuqin_83
帖子: 10606
注册时间: 2006-05-13 4:02
送出感谢: 0
接收感谢: 7 次
联系:

#33

帖子 zhuqin_83 » 2008-07-01 18:04

嗯,偶受用的紧,丫头再多说一点。
HP Pavilion DV6-2064CA: AMD Turion II Ultra Dual-Core Mobile M640, HD4650, 2GBx2 DDR2-800, Seagate 500GB 7200RPM SATA, BD-ROM
DELL UltraSharp 2209WA
Arch64, Testing repo
getaone
帖子: 14
注册时间: 2007-12-24 20:19
送出感谢: 0
接收感谢: 0

#34

帖子 getaone » 2008-08-04 20:22

大大再來請教一下

./configure了以後,再做到make的時候就出現錯誤

因為不曉得是怎樣的錯誤,找了好一陣子的google不知道自己到底該看什麼資料

所以把流程放上來請教大大

感謝大大的幫忙

./configure --prefix=/usrchecking for a BSD-compatible install... /usr/bin/install -c
checking whether build environment is sane... yes
checking for a thread-safe mkdir -p... /bin/mkdir -p
checking for gawk... no
checking for mawk... mawk
checking whether make sets $(MAKE)... yes
checking whether to enable maintainer-specific portions of Makefiles... no
checking build system type... i686-pc-linux-gnu
checking host system type... i686-pc-linux-gnu
checking for style of include used by make... GNU
checking for gcc... gcc
checking for C compiler default output file name... a.out
checking whether the C compiler works... yes
checking whether we are cross compiling... no
checking for suffix of executables...
checking for suffix of object files... o
checking whether we are using the GNU C compiler... yes
checking whether gcc accepts -g... yes
checking for gcc option to accept ISO C89... none needed
checking dependency style of gcc... gcc3
checking for a sed that does not truncate output... /bin/sed
checking for grep that handles long lines and -e... /bin/grep
checking for egrep... /bin/grep -E
checking for ld used by gcc... /usr/bin/ld
checking if the linker (/usr/bin/ld) is GNU ld... yes
checking for /usr/bin/ld option to reload object files... -r
checking for BSD-compatible nm... /usr/bin/nm -B
checking whether ln -s works... yes
checking how to recognize dependent libraries... pass_all
checking how to run the C preprocessor... gcc -E
checking for ANSI C header files... yes
checking for sys/types.h... yes
checking for sys/stat.h... yes
checking for stdlib.h... yes
checking for string.h... yes
checking for memory.h... yes
checking for strings.h... yes
checking for inttypes.h... yes
checking for stdint.h... yes
checking for unistd.h... yes
checking dlfcn.h usability... yes
checking dlfcn.h presence... yes
checking for dlfcn.h... yes
checking for g++... g++
checking whether we are using the GNU C++ compiler... yes
checking whether g++ accepts -g... yes
checking dependency style of g++... gcc3
checking how to run the C++ preprocessor... g++ -E
checking for g77... no
checking for xlf... no
checking for f77... no
checking for frt... no
checking for pgf77... no
checking for cf77... no
checking for fort77... no
checking for fl32... no
checking for af77... no
checking for xlf90... no
checking for f90... no
checking for pgf90... no
checking for pghpf... no
checking for epcf90... no
checking for gfortran... no
checking for g95... no
checking for xlf95... no
checking for f95... no
checking for fort... no
checking for ifort... no
checking for ifc... no
checking for efc... no
checking for pgf95... no
checking for lf95... no
checking for ftn... no
checking whether we are using the GNU Fortran 77 compiler... no
checking whether accepts -g... no
checking the maximum length of command line arguments... 98304
checking command to parse /usr/bin/nm -B output from gcc object... ok
checking for objdir... .libs
checking for ar... ar
checking for ranlib... ranlib
checking for strip... strip
checking if gcc supports -fno-rtti -fno-exceptions... no
checking for gcc option to produce PIC... -fPIC
checking if gcc PIC flag -fPIC works... yes
checking if gcc static flag -static works... yes
checking if gcc supports -c -o file.o... yes
checking whether the gcc linker (/usr/bin/ld) supports shared libraries... yes
checking whether -lc should be explicitly linked in... no
checking dynamic linker characteristics... GNU/Linux ld.so
checking how to hardcode library paths into programs... immediate
checking whether stripping libraries is possible... yes
checking if libtool supports shared libraries... yes
checking whether to build shared libraries... yes
checking whether to build static libraries... no
configure: creating libtool
appending configuration tag "CXX" to libtool
checking for ld used by g++... /usr/bin/ld
checking if the linker (/usr/bin/ld) is GNU ld... yes
checking whether the g++ linker (/usr/bin/ld) supports shared libraries... yes
checking for g++ option to produce PIC... -fPIC
checking if g++ PIC flag -fPIC works... yes
checking if g++ static flag -static works... yes
checking if g++ supports -c -o file.o... yes
checking whether the g++ linker (/usr/bin/ld) supports shared libraries... yes
checking dynamic linker characteristics... GNU/Linux ld.so
(cached) (cached) checking how to hardcode library paths into programs... immediate
appending configuration tag "F77" to libtool
checking for gcc... (cached) gcc
checking whether we are using the GNU C compiler... (cached) yes
checking whether gcc accepts -g... (cached) yes
checking for gcc option to accept ISO C89... (cached) none needed
checking dependency style of gcc... (cached) gcc3
checking if XINERAMA is defined... yes
checking if RANDR is defined... yes
checking if RENDER is defined... yes
checking if XV is defined... yes
checking if XF86MISC is defined... yes
checking if DPMSExtension is defined... yes
checking for pkg-config... /usr/bin/pkg-config
checking pkg-config is at least version 0.9.0... yes
checking for XORG... yes
checking for ANSI C header files... (cached) yes
checking for /usr/include/xorg/dri.h... yes
checking for /usr/include/xorg/sarea.h... yes
checking for /usr/include/xorg/dristruct.h... yes
checking for /usr/include/xorg/damage.h... yes
checking whether to include DRI support... yes
checking for DRI... yes
checking for xf86Modes.h... yes
checking whether to enable EXA support... yes
checking exa.h usability... yes
checking exa.h presence... yes
checking for exa.h... yes
checking whether EXA version is at least 2.0.0... yes
checking whether xf86XVFillKeyHelperDrawable is declared... yes
checking whether xf86ModeBandwidth is declared... no
checking whether xf86_crtc_clip_video_helper is declared... yes
checking whether xf86RotateFreeShadow is declared... no
checking whether pci_device_enable is declared... no
checking whether XSERVER_LIBPCIACCESS is declared... no
configure: X server has new mode code
checking byteswap.h usability... yes
checking byteswap.h presence... yes
checking for byteswap.h... yes
checking sys/endian.h usability... no
checking sys/endian.h presence... no
checking for sys/endian.h... no
checking for /usr/share/sgml/X11/defs.ent... no
checking for linuxdoc... no
checking for ps2pdf... /usr/bin/ps2pdf
checking Whether to build documentation... no
checking Whether to build pdf documentation... yes
configure: The atimisc sub-driver has been split out to xf86-video-mach64:
git://anongit.freedesktop.org/git/xorg/driver/xf86-video-mach64
Please install that driver as well for mach64-based cards.

configure: The r128 sub-driver has been split out to xf86-video-r128:
git://anongit.freedesktop.org/git/xorg/driver/xf86-video-r128
Please install that driver as well for rage128-based cards.

configure: creating ./config.status
config.status: creating Makefile
config.status: creating src/Makefile
config.status: creating man/Makefile
config.status: creating config.h
config.status: config.h is unchanged
config.status: executing depfiles commands


make
make all-recursive
make[1]: Entering directory `/home/getaone/xf86-video-ati-6.9.0'
Making all in src
make[2]: Entering directory `/home/getaone/xf86-video-ati-6.9.0/src'
/bin/bash ../libtool --tag=CC --mode=link gcc -I/usr/include/xorg -I/usr/include/pixman-1 -I/usr/include/drm -I/usr/include/X11/dri -DDISABLE_EASF -DENABLE_ALL_SERVICE_FUNCTIONS -DATOM_BIOS -DATOM_BIOS_PARSER -DDRIVER_PARSER -g -O2 -module -avoid-version -o radeon_drv.la -rpath /usr/lib/xorg/modules/drivers radeon_accel.lo radeon_cursor.lo radeon_dga.lo radeon_driver.lo radeon_video.lo radeon_bios.lo radeon_mm_i2c.lo radeon_vip.lo radeon_misc.lo radeon_probe.lo legacy_crtc.lo legacy_output.lo radeon_textured_video.lo radeon_crtc.lo radeon_output.lo radeon_modes.lo radeon_tv.lo CD_Operations.lo Decoder.lo hwserv_drv.lo radeon_atombios.lo radeon_atomwrapper.lo radeon_dri.lo radeon_exa.lo atombios_output.lo atombios_crtc.lo
gcc -shared .libs/radeon_accel.o .libs/radeon_cursor.o .libs/radeon_dga.o .libs/radeon_driver.o .libs/radeon_video.o .libs/radeon_bios.o .libs/radeon_mm_i2c.o .libs/radeon_vip.o .libs/radeon_misc.o .libs/radeon_probe.o .libs/legacy_crtc.o .libs/legacy_output.o .libs/radeon_textured_video.o .libs/radeon_crtc.o .libs/radeon_output.o .libs/radeon_modes.o .libs/radeon_tv.o .libs/CD_Operations.o .libs/Decoder.o .libs/hwserv_drv.o .libs/radeon_atombios.o .libs/radeon_atomwrapper.o .libs/radeon_dri.o .libs/radeon_exa.o .libs/atombios_output.o .libs/atombios_crtc.o -Wl,-soname -Wl,radeon_drv.so -o .libs/radeon_drv.so
collect2: ld terminated with signal 11 [Segmentation fault]
/usr/bin/ld: i386:x86-64 architecture of input file `.libs/hwserv_drv.o' is incompatible with i386 output
/usr/bin/ld: i386:x86-64 architecture of input file `.libs/radeon_atomwrapper.o' is incompatible with i386 output
make[2]: *** [radeon_drv.la] Error 1
make[2]: Leaving directory `/home/getaone/xf86-video-ati-6.9.0/src'
make[1]: *** [all-recursive] Error 1
make[1]: Leaving directory `/home/getaone/xf86-video-ati-6.9.0'
make: *** [all] Error 2
头像
zhuqin_83
帖子: 10606
注册时间: 2006-05-13 4:02
送出感谢: 0
接收感谢: 7 次
联系:

#35

帖子 zhuqin_83 » 2008-08-04 23:19

http://packages.ubuntu.com/intrepid/xse ... deo-radeon
http://packages.ubuntu.com/intrepid/xse ... -video-ati
debian的还是用自己的方法吧,可以不编译的尽量不编译,除非有问题,那么用那个什么apt-build来弄一下就可以了。
HP Pavilion DV6-2064CA: AMD Turion II Ultra Dual-Core Mobile M640, HD4650, 2GBx2 DDR2-800, Seagate 500GB 7200RPM SATA, BD-ROM
DELL UltraSharp 2209WA
Arch64, Testing repo
头像
neolee
帖子: 60
注册时间: 2006-05-06 10:46
来自: 伟人故里
送出感谢: 0
接收感谢: 0

#36

帖子 neolee » 2008-08-25 14:01

闪屏就用X11
shevalano
帖子: 46
注册时间: 2007-01-12 21:33
来自: Hebei
送出感谢: 1 次
接收感谢: 0

Re: [分享]提升ati商业驱动在compiz下的性能,3/21 更新

#37

帖子 shevalano » 2008-12-22 12:13

:em01 我试试
回复

回到 “常用硬件支持”