Debian怎么删除內核？（重新安装），3.2內核开机黑屏（已解决）

[lwaterl]

安完內核后发现有一个地方没开启，
安完3.2內核，开机黑屏
所以有了两个问题：怎么重安內核，怎么删除內核？
=====
原安装过程
# aptitude install -R linux-image-2.6.32-5-686
# aptitude -t squeeze-backports install linux 3.2.0-0.bpo.1-686-pae

想重装2.6.32 ，删除3.2.0

=========
重装用的aptitude reinstall
还没删除，因为黑屏解决了
我3.2黑屏是因为分辨率，安装backports包的驱动（RS780）

代码： 全选

# aptitude -t squeeze-backports install firmware-linux-nonfree

[nmsfan]

aptitude remove 不行吗？？
进recovery模式看看行不行？

[lwaterl]

应该是没问题，想问怎么把它干净的删除，网上好多都不一样，看晕了
再有就是，你的意思是重安也是先删后安吗？把內核全删了再安，系统还能正常工作吗？（不重启）

重安用aptitude reinstall 行吗?
删除用aptitude remove好，还是aptitude purge好？

=====
黑屏应是到(挂盘那里,写错了应该是)分辨率跳转，提示一到那里就黑，而不是死机，但系统应该是没开开，因为盲打不好使（我对盲打有信心，以前做过）
进recovery模式也一样黑屏

2.6的就没事，奇怪

[leeaman]

删除显卡驱动试试?3.2应该好过2.6吧?

[lwaterl]

嗯，删哪个?下面是我我查出来的：

xserver-xorg-video-all
xserver-xorg-video-apm
xserver-xorg-video-ark
xserver-xorg-video-ati
xserver-xorg-video-chips
xserver-xorg-video-cirrus
xserver-xorg-video-fbdev
xserver-xorg-video-geode
xserver-xorg-video-i128
xserver-xorg-video-i740
xserver-xorg-video-intel
xserver-xorg-video-mach64
xserver-xorg-video-mga
xserver-xorg-video-neomagic
xserver-xorg-video-nouveau
xserver-xorg-video-nv
xserver-xorg-video-openchrome
xserver-xorg-video-r128
xserver-xorg-video-radeon
xserver-xorg-video-rendition
xserver-xorg-video-s3
xserver-xorg-video-s3virge
xserver-xorg-video-savage
xserver-xorg-video-siliconmotion
xserver-xorg-video-sis
xserver-xorg-video-sisusb
xserver-xorg-video-tdfx
xserver-xorg-video-trident
xserver-xorg-video-tseng
xserver-xorg-video-vesa
xserver-xorg-video-vmware
xserver-xorg-video-voodoo

我找到这个命令

代码： 全选

$ sudo sh /usr/share/ati/fglrx-uninstall.sh
$ sudo apt-get remove --purge fglrx fglrx_* fglrx-amdcccle* fglrx-dev* xorg-driver-fglrx
但我干脆没有/usr/share/ati 这个文件目录

[leeaman]

说错了,可能硬件不兼容吧,你的啥配置?

[lwaterl]

刚重启，对比了一下，应该是出grub，分辨率跳转时黑的屏
2.6.32来说就是从800*600 变为1024*768
若还需要什么，请说


CPU ： AMD Athlon(tm) II X2 220
主板 ：斯巴达克黑潮BA-218
显卡 ：主板集成 ATI Radeon HD 4250显示核心

====
详细信息：

cat /proc/cpuinfo
processor : 0
vendor_id : AuthenticAMD
cpu family : 16
model : 6
model name : AMD Athlon(tm) II X2 220 Processor
stepping : 3
cpu MHz : 800.000
cache size : 512 KB
physical id : 0
siblings : 2
core id : 0
cpu cores : 2
apicid : 0
initial apicid : 0
fdiv_bug : no
hlt_bug : no
f00f_bug : no
coma_bug : no
fpu : yes
fpu_exception : yes
cpuid level : 5
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush mmx fxsr sse sse2 ht syscall nx mmxext fxsr_opt pdpe1gb rdtscp lm 3dnowext 3dnow constant_tsc nonstop_tsc extd_apicid pni monitor cx16 popcnt lahf_lm cmp_legacy svm extapic cr8_legacy abm sse4a misalignsse 3dnowprefetch osvw ibs skinit wdt
bogomips : 5598.74
clflush size : 64
cache_alignment : 64
address sizes : 48 bits physical, 48 bits virtual
power management: ts ttp tm stc 100mhzsteps hwpsta

processor : 1
vendor_id : AuthenticAMD
cpu family : 16
model : 6
model name : AMD Athlon(tm) II X2 220 Processor
stepping : 3
cpu MHz : 800.000
cache size : 512 KB
physical id : 0
siblings : 2
core id : 1
cpu cores : 2
apicid : 1
initial apicid : 1
fdiv_bug : no
hlt_bug : no
f00f_bug : no
coma_bug : no
fpu : yes
fpu_exception : yes
cpuid level : 5
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush mmx fxsr sse sse2 ht syscall nx mmxext fxsr_opt pdpe1gb rdtscp lm 3dnowext 3dnow constant_tsc nonstop_tsc extd_apicid pni monitor cx16 popcnt lahf_lm cmp_legacy svm extapic cr8_legacy abm sse4a misalignsse 3dnowprefetch osvw ibs skinit wdt
bogomips : 5600.02
clflush size : 64
cache_alignment : 64
address sizes : 48 bits physical, 48 bits virtual
power management: ts ttp tm stc 100mhzsteps hwpstate

lspci
00:00.0 Host bridge: Advanced Micro Devices [AMD] RS880 Host Bridge
00:01.0 PCI bridge: Advanced Micro Devices [AMD] RS780 PCI to PCI bridge (int gfx)
00:04.0 PCI bridge: Advanced Micro Devices [AMD] RS780 PCI to PCI bridge (PCIE port 0)
00:11.0 SATA controller: ATI Technologies Inc SB700/SB800 SATA Controller [IDE mode]
00:12.0 USB Controller: ATI Technologies Inc SB700/SB800 USB OHCI0 Controller
00:12.1 USB Controller: ATI Technologies Inc SB700 USB OHCI1 Controller
00:12.2 USB Controller: ATI Technologies Inc SB700/SB800 USB EHCI Controller
00:13.0 USB Controller: ATI Technologies Inc SB700/SB800 USB OHCI0 Controller
00:13.1 USB Controller: ATI Technologies Inc SB700 USB OHCI1 Controller
00:13.2 USB Controller: ATI Technologies Inc SB700/SB800 USB EHCI Controller
00:14.0 SMBus: ATI Technologies Inc SBx00 SMBus Controller (rev 3c)
00:14.1 IDE interface: ATI Technologies Inc SB700/SB800 IDE Controller
00:14.2 Audio device: ATI Technologies Inc SBx00 Azalia (Intel HDA)
00:14.3 ISA bridge: ATI Technologies Inc SB700/SB800 LPC host controller
00:14.4 PCI bridge: ATI Technologies Inc SBx00 PCI to PCI Bridge
00:14.5 USB Controller: ATI Technologies Inc SB700/SB800 USB OHCI2 Controller
00:18.0 Host bridge: Advanced Micro Devices [AMD] Family 10h Processor HyperTransport Configuration
00:18.1 Host bridge: Advanced Micro Devices [AMD] Family 10h Processor Address Map
00:18.2 Host bridge: Advanced Micro Devices [AMD] Family 10h Processor DRAM Controller
00:18.3 Host bridge: Advanced Micro Devices [AMD] Family 10h Processor Miscellaneous Control
00:18.4 Host bridge: Advanced Micro Devices [AMD] Family 10h Processor Link Control
01:05.0 VGA compatible controller: ATI Technologies Inc RS880 [Radeon HD 4250]
01:05.1 Audio device: ATI Technologies Inc RS880 Audio Device [Radeon HD 4200]
02:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 03)

[leeaman]

看样子没装受限制驱动啊,试试acpi=off noapic之类的内核参数看看了,不行重装吧

[lwaterl]

跟据你的提示，我把KMS关了，3.2就能进了，是分辨率的事？有办法吗？

[acid303]

从 backports 安装 firmware-linux-nonfree 看看

[lwaterl]

从 backports 安装 firmware-linux-nonfree 看看

安完后，能进了

[chipong]

黑屏了，你怎安装的？

[photor]

[lihongwu1987]

不知道楼主的情况是否和我一样，我把kms写入/etc/initramfs-tools/modules文件，再重新update-iniramfs -u就能正常使用了，在网上到处都说把KMS关了，那是躲避问题而不是解决问题。