UGS NX 8.5 LINUX64在ubuntu下安装成功!教程附上(11.14更新快盘, 11.18更新破解）

[catacrok]

Hello again Dehavilland,

thanks, Finally I had patched the server I think that correctly, after did sudo dpkg-reconfigure dash
. Changing bash for dash.

Then,

marlo@bubu:/usr/Siemens/PLMLicenseServer$ ./lmgrd -c splm5.lic
…
0:59:49 (ugslmd) IDEAS_gateway IDEAS_ufunc_execute IDEAS_ug_kf_author
0:59:49 (ugslmd) IDEAS_ug_kf_execute IDEAS_nx_ship_concept IDEAS_ug_body_design
0:59:49 (ugslmd) IDEAS_ug_process_aid IDEAS_nx_general_packaging IDEAS_cam_base
0:59:49 (ugslmd) IDEAS_pcf_package_file IDEAS_nx_penetration_mgmt IDEAS_assemblies
0:59:49 (ugslmd) IDEAS_solid_modeling IDEAS_wave IDEAS_nx_drafting_plus
0:59:49 (ugslmd) ADVDES_wire_edm_machining
0:59:49 (ugslmd)
0:59:49 (ugslmd) Licenses are case sensitive for ugslmd
0:59:49 (ugslmd)
0:59:49 (ugslmd) EXTERNAL FILTERS are OFF
0:59:49 (lmgrd) ugslmd using TCP-port 57355

All is good here?

But...

marlo@bubu:/usr/ugs085/ugii$ ./ugmenu
Executing ugmenux...WARNING FROM Xt_Warning : Cannot convert string "-adobe-helvetica-bold-r-normal--14-140-75-75-p-*-*" to type FontStruct

and after choose NX


Starting NX ...
====================================================
Failed to handle error condition correctly - exiting

NX License Error: License Server machine is down or not responding. Check that UGS_LICENSE_SERVER is set correctly.[ -96 ]
====================================================


again.

[gunzelee]

有没有人安装成功的，出来说句话吧

[santai543]

谁有安装文件啊？能共享下不？

[dehavilland]

Well，have you forgotten to set the environment variables?

Sent from my HTC Desire S using Tapatalk 2

[catacrok]

Yes I has set them.


DeHavilland I am tired of trying it, I give up, i will try to install the server on a windows virtualbox machine, so I am dowloading again to have the 32 version argh...
Once i installed it, i have to edit to add server address /usr/Siemens/PLMLicenseServer/splm5.lic, ¿something more?

[gunzelee]

看来又是个半调子贴了。

[kchier]

现在又下载 不到了

[dehavilland]

Sorry for that. Anyway，a virtual machine takes so much memory...

Sent from my HTC Desire S using Tapatalk 2

[dehavilland]

我也没办法啊。我的这些东西也不一定是每个人都适用的。



Sent from my HTC Desire S using Tapatalk 2

[dehavilland]

现在又下载 不到了

去hao007找torrent吧

Sent from my HTC Desire S using Tapatalk 2

[sxxjwz]

12.04 安装成功

[js_fj_zqh]

ubuntu 12.10
**********号以下是因为ug_install脚本没改撤底，现在全安装好了，但启动licenses如下：
15:54:07 (ugslmd)
15:54:07 (ugslmd) Licenses are case sensitive for ugslmd
15:54:07 (ugslmd)
15:54:07 (ugslmd) EXTERNAL FILTERS are OFF
15:54:07 (lmgrd) ugslmd using TCP-port 49253
且在终端ps -e也看到了ugslmd进程，到这里应该是没问题吧。

但在终端输入./ugmenu与sudo ./ugmenu都没用，只有找到ugmenu双击，在终端中运行。启动。但提示
Executing ugmenux...WARNING FROM Xt_Warning : Cannot convert string "-adobe-helvetica-bold-r-normal--14-140-75-75-p-*-*" to type FontStruct
点APPLE，出现nx启动界面,提示
Failed to handle error condition correctly - exiting NX requires a server_id feature in the license file.
Fatal error detected
出错，退出。


**********************************************************************************************************************************************
在装到运行 。／ug_install时
zqh@asusZQH:~/ug85$ sudo ./ug_install
initializing ...
ERROR: Unrecognized or unsupported Linux.
zqh@asusZQH:~/ug85$
请问怎么解决。

别外，在
7、修改/etc/hosts文件 加入两行
127.0.0.1 <PCname> localhost
因我前两天安装nx6.0不成功，localhost内容如下：
127.0.0.1 localhost
127.0.1.1 asusZQH

# The following lines are desirable for IPv6 capable hosts
::1 ip6-localhost ip6-loopback
fe00::0 ip6-localnet
ff00::0 ip6-mcastprefix
ff02::1 ip6-allnodes
ff02::2 ip6-allrouters
是要改成这样吗？
127.0.0.1 localhost
127.0.1.1 asusZQH

127.0.0.1 asusZQH localhost

# The following lines are desirable for IPv6 capable hosts
::1 ip6-localhost ip6-loopback
fe00::0 ip6-localnet
ff00::0 ip6-mcastprefix
ff02::1 ip6-allnodes
ff02::2 ip6-allrouters
请安装成功的大侠们指点。

因为本处给的联接用不了我下的安装包里没有河蟹文件，我看1楼也没讲到河蟹文件用在哪吗。

[xihuyanyu]

我的却卡在这里：
* Enter CR after reading errors.

NX V8.5 Installation 2013年 03月 16日 星期六 12:48:43 CST
Enter '?' for help, '!' for shell, or 'q' to quit at any prompt.
Main Menu. 'n/a' indicates item is not applicable

1. UG Installation type. ______________________ [load+configure]
*****> 2. SOURCE directory. _____________________ [/root/ugs085/nx085/]
3. BASE directory. _______________________________ [/usr/ugs085]
4. O.K. to MODIFY system files. __________________________ [yes]
5. License server(s) or a filename. ____ [28000@linux-o11z.site]

Item(s) marked ' *****> ' must be corrected:
Item 2: UGII not found in /root/ugs085/nx085/

* Enter item(s) to query or change: [continue]
不知道还要怎么做，都是下载的dvd，也拷贝，指定到了源文件目录中。不知道还要怎么做啊，文件目录里面确实没有UGII这个文件，
不过有个ugii.tar.z。实在不知道怎么搞了！

[buzhidaohuy]

SPLMLicenseServer_v5.3.1_linux_setup.bin：找不到命令
这是怎么回事啊

[yanjiqiu]

楼主在哪里可以下载，怎么断更了？