谁能帮忙解决一下上网的问题!
版面规则
我们都知道新人的确很菜,也喜欢抱怨,并且带有浓厚的Windows习惯,但既然在这里询问,我们就应该有责任帮助他们解决问题,而不是直接泼冷水、简单的否定或发表对解决问题没有任何帮助的帖子。乐于分享,以人为本,这正是Ubuntu的精神所在。
我们都知道新人的确很菜,也喜欢抱怨,并且带有浓厚的Windows习惯,但既然在这里询问,我们就应该有责任帮助他们解决问题,而不是直接泼冷水、简单的否定或发表对解决问题没有任何帮助的帖子。乐于分享,以人为本,这正是Ubuntu的精神所在。
-
- 帖子: 239
- 注册时间: 2006-04-01 10:11
谁能帮忙解决一下上网的问题!
环境ubuntu606,更新内核(仅x86),sudo apt-get install linux-k7
就不能上网了,运行pppoeconfig,提示已经有一个程序控制eth0
现在已经删除linux-k7 ,还是不能上网,不能解析dns
贴一些信息
ubuntu@shu:~$ ifconfig
eth0 Link encap:Ethernet HWaddr 00:05:5D:6D:67:8E
inet addr:192.168.1.2 Bcast:192.168.1.255 Mask:255.255.255.0
inet6 addr: fe80::205:5dff:fe6d:678e/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:51 errors:0 dropped:0 overruns:0 frame:0
TX packets:115 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:3984 (3.8 KiB) TX bytes:7686 (7.5 KiB)
Interrupt:177 Base address:0xec00
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:5 errors:0 dropped:0 overruns:0 frame:0
TX packets:5 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:272 (272.0 b) TX bytes:272 (272.0 b)
ppp0 Link encap:Point-to-Point Protocol
inet addr:222.70.93.222 P-t-P:218.1.60.235 Mask:255.255.255.255
UP POINTOPOINT RUNNING NOARP MULTICAST MTU:1492 Metric:1
RX packets:15 errors:0 dropped:0 overruns:0 frame:0
TX packets:15 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:3
RX bytes:910 (910.0 b) TX bytes:862 (862.0 b)
=============================================
/etc/network/interfaces
# This file describes the network interfaces available on your system
# and how to activate them. For more information, see interfaces(5).
# The loopback network interface
auto lo
iface lo inet loopback
# The primary network interface
auto eth0
iface eth0 inet dhcp
auto dsl-provider
iface dsl-provider inet ppp
provider dsl-provider
pre-up /sbin/ifconfig eth0 up # line maintained by pppoeconf
就不能上网了,运行pppoeconfig,提示已经有一个程序控制eth0
现在已经删除linux-k7 ,还是不能上网,不能解析dns
贴一些信息
ubuntu@shu:~$ ifconfig
eth0 Link encap:Ethernet HWaddr 00:05:5D:6D:67:8E
inet addr:192.168.1.2 Bcast:192.168.1.255 Mask:255.255.255.0
inet6 addr: fe80::205:5dff:fe6d:678e/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:51 errors:0 dropped:0 overruns:0 frame:0
TX packets:115 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:3984 (3.8 KiB) TX bytes:7686 (7.5 KiB)
Interrupt:177 Base address:0xec00
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:5 errors:0 dropped:0 overruns:0 frame:0
TX packets:5 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:272 (272.0 b) TX bytes:272 (272.0 b)
ppp0 Link encap:Point-to-Point Protocol
inet addr:222.70.93.222 P-t-P:218.1.60.235 Mask:255.255.255.255
UP POINTOPOINT RUNNING NOARP MULTICAST MTU:1492 Metric:1
RX packets:15 errors:0 dropped:0 overruns:0 frame:0
TX packets:15 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:3
RX bytes:910 (910.0 b) TX bytes:862 (862.0 b)
=============================================
/etc/network/interfaces
# This file describes the network interfaces available on your system
# and how to activate them. For more information, see interfaces(5).
# The loopback network interface
auto lo
iface lo inet loopback
# The primary network interface
auto eth0
iface eth0 inet dhcp
auto dsl-provider
iface dsl-provider inet ppp
provider dsl-provider
pre-up /sbin/ifconfig eth0 up # line maintained by pppoeconf
- Hamtaro
- 帖子: 308
- 注册时间: 2005-04-15 5:59
- karron
- 帖子: 6226
- 注册时间: 2005-06-11 14:03
- 来自: 不明真相的群众
- 联系:
-
- 帖子: 53
- 注册时间: 2006-05-27 18:40
同病相怜啊,我的也是!我没话说,就是郁闷!从前FC5可以识别网卡,但就是没办法用它上网,设置了近两周;谁知换了个发行版,直接都没办法识别,一个比一个烂!xinye0123 写了:我的连网卡都认不出
Ubuntu & windows xp pro + sp2
ABIT NF7-S2 nForce 2 ultra 400 + MCP-S
Athlon Barton 2600+
Kinstone DDR400 256MB*2 =512MB
Radeon 9800se 128bit / 128MB (open 8 pipes)
Seagate ATA100 80GB
SAMSUN 795MB
LG GSA-H20L DVD-RAM + Lightscribe
ABIT NF7-S2 nForce 2 ultra 400 + MCP-S
Athlon Barton 2600+
Kinstone DDR400 256MB*2 =512MB
Radeon 9800se 128bit / 128MB (open 8 pipes)
Seagate ATA100 80GB
SAMSUN 795MB
LG GSA-H20L DVD-RAM + Lightscribe
-
- 帖子: 309
- 注册时间: 2006-01-04 19:26
可是现在我每次重启系统后要重新配置PPPOE了,不然不能上网了。以前用5.10都会在启动时自动拨号的。karron 写了:asdl拨号,请使用 sudo pppoeconf 来配置用户名和密码
而且我在配置时已经启动了开机自动拨号了的。
Athlon 64 X2 Dual Core Processor 4200+ Socket 939 OC 2.8 GHZ
G.Skill DDR400 2 3 2 5 1GB *2 Dual Channel OC DDR500
Szgalaxy 8600 GTE 650MHZ/2000MHZ
Seagate 80GB *2 RAID 0+Maxtor 80G
DFI LanParty UT NF4-D
kernel 2.6.22-ck1 再见,Con Kolivas!
G.Skill DDR400 2 3 2 5 1GB *2 Dual Channel OC DDR500
Szgalaxy 8600 GTE 650MHZ/2000MHZ
Seagate 80GB *2 RAID 0+Maxtor 80G
DFI LanParty UT NF4-D
kernel 2.6.22-ck1 再见,Con Kolivas!
- karron
- 帖子: 6226
- 注册时间: 2005-06-11 14:03
- 来自: 不明真相的群众
- 联系:
在终端中输入 sudo gedit /etc/network/interfaces ,把最后的那些多余的auto eth0注释掉或者删除.然后在做一个链接 sudo ln -s /etc/ppp/pppoe_on_boot /etc/ppp/ppp_on_boot .重启应该就好了.
我的blog,关于技术,软件,linux,vim <---- 所有博客均被河蟹.
-
- 帖子: 309
- 注册时间: 2006-01-04 19:26