分页: 2 / 7

发表于 : 2006-12-12 8:41
jimmin
调节与监视 CPU 频率有什么实用价值吗?

发表于 : 2006-12-14 13:00
zhuqin_83
省电阿,看什么时候cpu运行比较吃力啦之类的。

发表于 : 2006-12-22 23:19
TualatriX
好文章!我把我的双核从1.0G弄到1.67G了。

发表于 : 2006-12-23 1:29
qquchn
调整的目的不是为了快 而是降低主频 减少发热 通过降频 我的风扇就可以运永远不转

发表于 : 2006-12-23 5:04
jimmin
qquchn 写了:调整的目的不是为了快 而是降低主频 减少发热 通过降频 我的风扇就可以运永远不转
永远不转!这不可能吧?

发表于 : 2007-01-10 11:46
appleboy
好帖。本本用户是用的着的。

发表于 : 2007-01-17 18:57
cindy
cpufrequtils 002: cpufreq-info (C) Dominik Brodowski 2004-2006
Report errors and bugs to [email protected], please.
analyzing CPU 0:
driver: centrino
CPUs which need to switch frequency at the same time: 0
hardware limits: 798 MHz - 1.73 GHz
available frequency steps: 1.73 GHz, 1.73 GHz, 1.73 GHz, 1.73 GHz, 1.73 GHz, 1.73 GHz, 1.73 GHz, 1.33 GHz, 1.06 GHz, 798 MHz
available cpufreq governors: powersave, userspace, ondemand, conservative, performance
current policy: frequency should be within 798 MHz and 1.73 GHz.
The governor "ondemand" may decide which speed to use
within this range.
current CPU frequency is 1.73 GHz.

发表于 : 2007-01-30 19:43
gen.fengle
终于知道怎么设置给普通用户使用的权限了~我主要是在某些时候不让我的cpu太快,不然风扇太响,本本太热,hoho

发表于 : 2007-01-30 19:57
dogfox

代码: 全选

:~$ cpufreq-info
cpufrequtils 0.4: cpufreq-info (C) Dominik Brodowski 2004
Report errors and bugs to [email protected], please.
analyzing CPU 0:
  no or unknown cpufreq driver is active on this CPU
无法识别赛扬D?

发表于 : 2007-01-30 20:00
zhuqin_83
赛扬d又不支持speed step

发表于 : 2007-01-30 20:52
hujy
不知能否实现调节风扇转速,k8带冷又静功能在win下通过软件可以降低风扇转速减少噪音。

发表于 : 2007-01-30 20:56
zhuqin_83
风扇都是由apci电源管理的,和这个软件无关。

发表于 : 2007-02-12 1:33
Jimmy.Zhou
好贴,收藏。zhuqin太利害了,崇拜! :shock:

发表于 : 2007-02-20 5:24
ggjjzhzz
好东西,谢谢了

发表于 : 2007-02-22 16:38
xjj
现在用着 CPU频率范围监视器 ,lz的软件可用性大不大阿。