ATI&&intel双显卡切换——已实现

[tuxli]

楼主好，我的笔记本是 hp inter && ati hd5450 双显卡，我安装带有gnome3的linux系统安装不上，是不是跟显卡有关系。。。求解

[jqawp]

希望楼主能写的直白一点，新人，很多看不懂

[a1457409696]

楼主牛人 为了这头疼的双显卡 我把电脑都换了 看来现在可以换回来了。。。。

[Amandaibags]

暂未测试

[mouqilng]

为什么我都用上11.7了还是不行？我的本是thinkpad E520，有没有相似情况的，求交流！

[mouqilng]

我按照lz的步骤做了，但是在第三步时输入命令:cat /usr/share/ati/fglrx-install.log|less
时提示Uninstalling any previously installed drivers.
Unloading radeon module...
ERROR: Module radeon is in use
Unloading drm module...
ERROR: Module drm is in use by radeon,ttm,i915,drm_kms_helper
[Message] Kernel Module : Trying to install a precompiled kernel module.
[Message] Kernel Module : Precompiled kernel module version mismatched.
[Message] Kernel Module : Found kernel module build environment, generating kernel module now.
AMD kernel module generator version 2.1
doing Makefile based build for kernel 2.6.x and higher
rm -rf *.c *.h *.o *.ko *.a .??* *.symvers
make -C /lib/modules/2.6.38-8-generic/build SUBDIRS=/lib/modules/fglrx/build_mod/2.6.x modules
make[1]: 正在进入目录 `/usr/src/linux-headers-2.6.38-8-generic'
CC [M] /lib/modules/fglrx/build_mod/2.6.x/firegl_public.o
CC [M] /lib/modules/fglrx/buicat /usr/share/ati/fglrx-install.log|less
ld_mod/2.6.x/kcl_acpi.o
CC [M] /lib/modules/fglrx/build_mod/2.6.x/kcl_agp.o
CC [M] /lib/modules/fglrx/build_mod/2.6.x/kcl_debug.o
CC [M] /lib/modules/fglrx/build_mod/2.6.x/kcl_ioctl.o
CC [M] /lib/modules/fglrx/build_mod/2.6.x/kcl_io.o
CC [M] /lib/modules/fglrx/build_mod/2.6.x/kcl_pci.o
CC [M] /lib/modules/fglrx/build_mod/2.6.x/kcl_str.o
CC [M] /lib/modules/fglrx/build_mod/2.6.x/kcl_iommu.o
CC [M] /lib/modules/fglrx/build_mod/2.6.x/kcl.o
CC [M] /lib/modules/fglrx/build_mod/2.6.x/kcl_wait.o
LD [M] /lib/modules/fglrx/build_mod/2.6.x/fglrx.o
Building modules, stage 2.
MODPOST 1 modules
CC /lib/modules/fglrx/build_mod/2.6.x/fglrx.mod.o
LD [M] /lib/modules/fglrx/build_mod/2.6.x/fglrx.ko
make[1]:正在离开目录 `/usr/src/linux-headers-2.6.38-8-generic'
build succeeded with return value 0
duplicating results into driver repository...
done.
You must change your working directory to /lib/modules/fglrx
and then call ./make_install.sh in order to install the built module.
- recreating module dependency list
- trying a sample load of the kernel modules done
:
[Reboot] Kernel Module : update-initramfs


输入命令 /lib/modules/fglrx/make_install.sh时提示
Tailored kernel module for fglrx not present in your system.
You must go to /lib/modules/fglrx/build_mod subdir
and execute './make.sh' to build a fully customed kernel module.
Afterwards go to /lib/modules/fglrx and run './make_install.sh'
in order to install the module into your kernel's module repository.
(see readme.txt for more details.)

As of now you can still run your XServer in 2D, but hardware accelerated
OpenGL will not work and 2D graphics will lack performance.

failed.
我时菜鸟，请教高手

[linbc]

暂未测试。马克~

[linuxhenhao]

我按照lz的步骤做了，但是在第三步时输入命令:cat /usr/share/ati/fglrx-install.log|less
时提示Uninstalling any previously installed drivers.
Unloading radeon module...
ERROR: Module radeon is in use
Unloading drm module...
ERROR: Module drm is in use by radeon,ttm,i915,drm_kms_helper
[Message] Kernel Module : Trying to install a precompiled kernel module.
[Message] Kernel Module : Precompiled kernel module version mismatched.
[Message] Kernel Module : Found kernel module build environment, generating kernel module now.
AMD kernel module generator version 2.1
doing Makefile based build for kernel 2.6.x and higher
rm -rf *.c *.h *.o *.ko *.a .??* *.symvers
make -C /lib/modules/2.6.38-8-generic/build SUBDIRS=/lib/modules/fglrx/build_mod/2.6.x modules
make[1]: 正在进入目录 `/usr/src/linux-headers-2.6.38-8-generic'
CC [M] /lib/modules/fglrx/build_mod/2.6.x/firegl_public.o
CC [M] /lib/modules/fglrx/buicat /usr/share/ati/fglrx-install.log|less
ld_mod/2.6.x/kcl_acpi.o
CC [M] /lib/modules/fglrx/build_mod/2.6.x/kcl_agp.o
CC [M] /lib/modules/fglrx/build_mod/2.6.x/kcl_debug.o
CC [M] /lib/modules/fglrx/build_mod/2.6.x/kcl_ioctl.o
CC [M] /lib/modules/fglrx/build_mod/2.6.x/kcl_io.o
CC [M] /lib/modules/fglrx/build_mod/2.6.x/kcl_pci.o
CC [M] /lib/modules/fglrx/build_mod/2.6.x/kcl_str.o
CC [M] /lib/modules/fglrx/build_mod/2.6.x/kcl_iommu.o
CC [M] /lib/modules/fglrx/build_mod/2.6.x/kcl.o
CC [M] /lib/modules/fglrx/build_mod/2.6.x/kcl_wait.o
LD [M] /lib/modules/fglrx/build_mod/2.6.x/fglrx.o
Building modules, stage 2.
MODPOST 1 modules
CC /lib/modules/fglrx/build_mod/2.6.x/fglrx.mod.o
LD [M] /lib/modules/fglrx/build_mod/2.6.x/fglrx.ko
make[1]:正在离开目录 `/usr/src/linux-headers-2.6.38-8-generic'
build succeeded with return value 0
duplicating results into driver repository...
done.
You must change your working directory to /lib/modules/fglrx
and then call ./make_install.sh in order to install the built module.
- recreating module dependency list
- trying a sample load of the kernel modules done
:
[Reboot] Kernel Module : update-initramfs


输入命令 /lib/modules/fglrx/make_install.sh时提示
Tailored kernel module for fglrx not present in your system.
You must go to /lib/modules/fglrx/build_mod subdir
and execute './make.sh' to build a fully customed kernel module.
Afterwards go to /lib/modules/fglrx and run './make_install.sh'
in order to install the module into your kernel's module repository.
(see readme.txt for more details.)

As of now you can still run your XServer in 2D, but hardware accelerated
OpenGL will not work and 2D graphics will lack performance.

failed.
我时菜鸟，请教高手

也就是说编译未成功，但是看fglrx-install的log确实已经编译好的，那你就按照提示重新编译一下呗

代码： 全选

sudo /lib/modules/fglrx/build_mod/make.sh

然后[

代码： 全选

sudo /lib/modules/fglrx make_install.sh

重启，这样应该可以了

[uqsmiler]

刚刚装好系统的超级菜鸟求教，请问第二部sudo /path2ati***.run/ati***.run是什么意思啊？我目前的情况是在bios中设置为可切换后安装ubuntu11.04，重启后卡在提示符界面，提示reenabling gpu turbo... 到bios中切换为独显后可以进入系统。安装最新的ati 11-8闭源驱动，使用的命令为 sudo sh ./ati-driver-installer-11-8-x86.x86_64.run。重启后在bios中设置为可切换，可以进入系统，但是明显整个界面都很卡，还不如没装之前的表现。用root账号从图形界面登录，然后在催化剂中的可切换显卡中选择intel，重启计算机后就出现了黑屏，但是还能听到系统启动的声音，不知道问题出在哪里啊，请高手指教。

[zhouquanbest]

我按照lz的步骤做了，但是在第三步时输入命令:cat /usr/share/ati/fglrx-install.log|less
时提示Uninstalling any previously installed drivers.
Unloading radeon module...
ERROR: Module radeon is in use
Unloading drm module...
ERROR: Module drm is in use by radeon,ttm,i915,drm_kms_helper
[Message] Kernel Module : Trying to install a precompiled kernel module.
[Message] Kernel Module : Precompiled kernel module version mismatched.
[Message] Kernel Module : Found kernel module build environment, generating kernel module now.
AMD kernel module generator version 2.1
doing Makefile based build for kernel 2.6.x and higher
rm -rf *.c *.h *.o *.ko *.a .??* *.symvers
make -C /lib/modules/2.6.38-8-generic/build SUBDIRS=/lib/modules/fglrx/build_mod/2.6.x modules
make[1]: 正在进入目录 `/usr/src/linux-headers-2.6.38-8-generic'
CC [M] /lib/modules/fglrx/build_mod/2.6.x/firegl_public.o
CC [M] /lib/modules/fglrx/buicat /usr/share/ati/fglrx-install.log|less
ld_mod/2.6.x/kcl_acpi.o
CC [M] /lib/modules/fglrx/build_mod/2.6.x/kcl_agp.o
CC [M] /lib/modules/fglrx/build_mod/2.6.x/kcl_debug.o
CC [M] /lib/modules/fglrx/build_mod/2.6.x/kcl_ioctl.o
CC [M] /lib/modules/fglrx/build_mod/2.6.x/kcl_io.o
CC [M] /lib/modules/fglrx/build_mod/2.6.x/kcl_pci.o
CC [M] /lib/modules/fglrx/build_mod/2.6.x/kcl_str.o
CC [M] /lib/modules/fglrx/build_mod/2.6.x/kcl_iommu.o
CC [M] /lib/modules/fglrx/build_mod/2.6.x/kcl.o
CC [M] /lib/modules/fglrx/build_mod/2.6.x/kcl_wait.o
LD [M] /lib/modules/fglrx/build_mod/2.6.x/fglrx.o
Building modules, stage 2.
MODPOST 1 modules
CC /lib/modules/fglrx/build_mod/2.6.x/fglrx.mod.o
LD [M] /lib/modules/fglrx/build_mod/2.6.x/fglrx.ko
make[1]:正在离开目录 `/usr/src/linux-headers-2.6.38-8-generic'
build succeeded with return value 0
duplicating results into driver repository...
done.
You must change your working directory to /lib/modules/fglrx
and then call ./make_install.sh in order to install the built module.
- recreating module dependency list
- trying a sample load of the kernel modules done
:
[Reboot] Kernel Module : update-initramfs


输入命令 /lib/modules/fglrx/make_install.sh时提示
Tailored kernel module for fglrx not present in your system.
You must go to /lib/modules/fglrx/build_mod subdir
and execute './make.sh' to build a fully customed kernel module.
Afterwards go to /lib/modules/fglrx and run './make_install.sh'
in order to install the module into your kernel's module repository.
(see readme.txt for more details.)

As of now you can still run your XServer in 2D, but hardware accelerated
OpenGL will not work and 2D graphics will lack performance.

failed.
我时菜鸟，请教高手

也就是说编译未成功，但是看fglrx-install的log确实已经编译好的，那你就按照提示重新编译一下呗

代码： 全选

sudo /lib/modules/fglrx/build_mod/make.sh

然后[

代码： 全选

sudo /lib/modules/fglrx make_install.sh

重启，这样应该可以了

我也是这个问题
重新编译了还是没反应 弄了半天 烦死了
我是Y560的机子 有没有同样问题的呀

[nkpoj]

我的是小Y，Y460，刚好有个双显卡。一开始也是像楼主那样说的屏弊了独显。现在更新安装了最新的Ati官方驱动中心。可以支持集显关独显了。更省电发热量更小。在Windows 7下我的用集显都有点热，在Ubuntu下用集显就热的一怎么明显了。

[470375939]

请问第二步怎么弄 本人刚接触ubuntu sudo /path2*.run/ati*****.run 这句指令什么意思 哪位大虾解释下。 /path2*.run/ati*****.run 这个是驱动文件路径？

[470375939]

我讲下我的安装过程吧 帮我看看哪里错了
先按教程下载驱动我的显卡是HD5650 下载的是11.9版驱动
下载后名字为a9.run
驱动选择 笔记本显卡-Radeon™ HD 系列-Mobility Radeon HD 5xxx 系列 -Linux x86

接下载运行uname -r 查处内核版本 装上了相应的头文件
代码 sudo apt-get install linux-headers-2.6.35-generic ,
安装必要的编译环境
代码
sudo apt-get install build-essential automake autoconf
目前都执行正常

接下来安装驱动
代码 sudo /home/a9.run 说找不到文件
把a9.run的文件属性里改了个可执行文件打钩再执行上面代码可以运行了 装完后
运行代码
cat /usr/share/ati/fglrx-install.log|less
显示下面的信息
DKMS: add Completed.

Kernel preparation unnecessary for this kernel. Skipping...

Building module:
cleaning build area....
cd /var/lib/dkms/fglrx/8.892/build; sh make.sh --nohints --uname_r=2.6.35-22-generic --norootcheck......
cleaning build area....

DKMS: build Completed.

fglrx.ko:
Running module version sanity check.
- Original module
- No original module exists within this kernel
- Installation
- Installing to /lib/modules/2.6.35-22-generic/updates/dkms/

depmod.....

DKMS: install Completed.
[Reboot] Kernel Module : update-initramfs
~
~
~
~
~
~
~
~
~
~
~
~
~
~
~
(END)


接着再按教程运行代码 /lib/modules/fglrx/make_install.sh 又是找不到文件
bash: /lib/modules/fglrx/make_install.sh: 没有那个文件或目录

没办法就先重启看看 重启后就进不去图形界面了。
帮我看看哪里错了

[webcreazy]

楼主好我的笔记本是lenovo Y460A 显卡是HD5650

在ubuntu10.10中安装ati 11.8.run以成功方法是：

cd /home/jun/下载 （进入驱动所在目录）

chmod +x ati.run （给予驱动可执行权限）

sudo ./ati.run （运行驱动）

但这个方法只可以用于ubuntu10.10

我在ubuntu11.04中安装一切都正常但一重启就无法进入图形界面，只有命令行

还有ubuntu11.04没按驱动前总是要启动很多次才能进入系统，全靠人品

求大神帮忙解决

ubuntu10.10太老了吾想升ubuntu11.04或ubuntu11.10

[zhouquanbest]

看来用Y系列的都悲剧了
装了后进不了GUI

在BIOS里禁用双显卡后就能进了
无奈呀

难道是因为我是wubi安装的？