从硬盘安装ubuntu 8.04,卡到grub引导这步下不去了,不知道咋办了,请大家帮我看看是什么问
发表于 : 2008-06-07 21:21
用的是ubuntu-8.04-alternate-i386.iso版本,下了grub4dos-0.4.3以及相关的引导文件,但在安装时进入grub后不能引导,试着在grub命令行输入命令">kernel (hd0" ,按table键后出现如下错误:
“Warning : unrecognized partition table for drive 80. please rebuild it using Microsoft-compatible FDISK tool (err=114),Current C/H/S=16383/48/63
Possible partitions are :
partion num: 0,Filesystem type is ntfs,partition type 0x7
partion num: 4,Filesystem type is ntfs,partition type 0x7
partion num: 5,Filesystem type is ntfs,partition type 0x7
partion num: 6,Filesystem type is ntfs,partition type 0x83
partion num: 7,Filesystem type is ntfs,partition type 0x82
partion num: 8,Filesystem type is ntfs,partition type 0xc"
在网看了半天,感觉是分区表出现了问题,下了分区表修复软件PTDwin,根本就不认我的硬盘,让重新建立分区表,但用另一个软件testdisk-6.9看什么都好着,硬盘分区显示都正确,现在不知道咋办了,请高人给看看问题在哪?
机器为联想机子,处理器为AMD Athlon(tm) 64 X2 Dual ,硬盘型号为WD1600AAJS-08PSA0,本来硬盘分区为C,D,E三个盘都为ntfs格式,为装ubuntu用Acronis PartionExpert 调整了下分区 增加了三个分区,分别为ext3和swap,Fat32。
已解决
“Warning : unrecognized partition table for drive 80. please rebuild it using Microsoft-compatible FDISK tool (err=114),Current C/H/S=16383/48/63
Possible partitions are :
partion num: 0,Filesystem type is ntfs,partition type 0x7
partion num: 4,Filesystem type is ntfs,partition type 0x7
partion num: 5,Filesystem type is ntfs,partition type 0x7
partion num: 6,Filesystem type is ntfs,partition type 0x83
partion num: 7,Filesystem type is ntfs,partition type 0x82
partion num: 8,Filesystem type is ntfs,partition type 0xc"
在网看了半天,感觉是分区表出现了问题,下了分区表修复软件PTDwin,根本就不认我的硬盘,让重新建立分区表,但用另一个软件testdisk-6.9看什么都好着,硬盘分区显示都正确,现在不知道咋办了,请高人给看看问题在哪?

机器为联想机子,处理器为AMD Athlon(tm) 64 X2 Dual ,硬盘型号为WD1600AAJS-08PSA0,本来硬盘分区为C,D,E三个盘都为ntfs格式,为装ubuntu用Acronis PartionExpert 调整了下分区 增加了三个分区,分别为ext3和swap,Fat32。

