终于搞定了，我也是Atheros AR8152这个网卡，过程如下：
一、到官网下载
http://partner.atheros.com/Drivers.aspxAR81Family Linux Driver驱动，但我却下载不了，不知道什么原因，然后在网上找到了一个
http://www.touslesdrivers.com/index.php ... code=29218；
二、用ls查看所下载driver的权限，如果用户没有执行权限，请用chmod修改，如果不懂，请找man；
三、用编辑器打开下载driver里面的readme文本，按步骤install就OK了：
1. Move the base driver tar file to the directory of your choice. For example,
use /home/username/arl1e or /usr/local/src/arl1e.
2. Untar/unzip archive:
tar zxf arl1e-x.x.x.x.tar.gz
3. Change to the driver src directory:
cd arl1e-x.x.x.x/src/
4. Compile the driver module:
make install
The binary will be installed as:
/lib/modules/<KERNEL VERSION>/kernel/drivers/net/arl1e.[k]o
The install locations listed above are the default locations. They might
not be correct for certain Linux distributions. For more information,
see the ldistrib.txt file included in the driver tar.
5. Install the module:
insmod arl1e <parameter>=<value>
6. Assign an IP address to the interface by entering the following, where
x is the interface number:
ifconfig ethx <IP_address>
7. Verify that the interface works. Enter the following, where <IP_address>
is the IP address for another machine on the same subnet as the interface
that is being tested:
ping <IP_address>
PS：注意执行文件的相应权限，不然会出错。
