Ubuntu中文论坛

HP LaserJet m1319f MFP打印机不能工作，原先的12.04下工作正常。请问如何补救，我这可是办公电脑，打印是必备需求呀。

能否试下：
1、软件中心安装 HPLIP
2、系统设置——打印机——添加打印机

zyfz 写了：能否试下：
1、软件中心安装 HPLIP
2、系统设置——打印机——添加打印机

添加打印机--------------------------一路顺利，完成。可是打印测试页 ，无动静！

正在安装 HPLIP，从hp官网找到的

从hp官网找到的 HPLIP，没有1404版对应的，下载了1204版的，安装：

~/下载$ sh 打印驱动1319-hplip-3.14.4.run
Creating directory hplip-3.14.4
Verifying archive integrity... All good.
Uncompressing HPLIP 3.14.4 Self Extracting Archive...........
..................

HP Linux Imaging and Printing System (ver. 3.14.4)
HPLIP Installer ver. 5.1

Copyright (c) 2001-13 Hewlett-Packard Development Company, LP
This software comes with ABSOLUTELY NO WARRANTY.
This is free software, and you are welcome to distribute it
under certain conditions. See COPYING file for more details.
Installer log saved in: hplip-install_Tue-22-Apr-2014_15:36:41.log
\
note: Defaults for each question are maked with a '*'. Press <enter> to accept the default.

INSTALLATION MODE
-----------------
Automatic mode will install the full HPLIP solution with the most common options.
Custom mode allows you to choose installation options to fit specific requirements.

Please choose the installation mode (a=automatic*, c=custom, q=quit) : a

Initializing. Please wait...

INTRODUCTION
------------
This installer will install HPLIP version 3.14.4 on your computer.
Please close any running package management systems now (YaST, Adept, Synaptic, Up2date, etc).

DISTRO/OS CONFIRMATION
----------------------
Distro appears to be Ubuntu 14.04.

Is "Ubuntu 14.04" your correct distro/OS and version (y=yes*, n=no, q=quit) ? y

ENTER USER PASSWORD
-------------------
Please enter the sudoer (wys)'s password:

INSTALLATION NOTES
------------------
Enable the universe/multiverse repositories. Also be sure you are using the Ubuntu "Main" Repositories. See: https://help.ubuntu.com/community/Repositories/Ubuntu for more information. Disable the CD-ROM/DVD source if you do not have the Ubuntu installation media inserted in the drive.

Please read the installation notes. Press <enter> to continue or 'q' to quit:

RUNNING PRE-INSTALL COMMANDS
----------------------------
OK

INSTALL MISSING REQUIRED DEPENDENCIES
-------------------------------------
warning: There are 7 missing REQUIRED dependencies.
note: Installation of dependencies requires an active internet connection.
warning: Missing REQUIRED dependency: gcc (gcc - GNU Project C and C++ Compiler)
warning: Missing REQUIRED dependency: python-devel (Python devel - Python development files)
warning: Missing REQUIRED dependency: cups-devel (CUPS devel- Common Unix Printing System development files)
warning: Missing REQUIRED dependency: libusb (libusb - USB library)
warning: Missing REQUIRED dependency: libtool (libtool - Library building support services)
warning: Missing REQUIRED dependency: cups-image (CUPS image - CUPS image development files)
warning: Missing REQUIRED dependency: libjpeg (libjpeg - JPEG library)

INSTALL MISSING OPTIONAL DEPENDENCIES
-------------------------------------
warning: There are 5 missing OPTIONAL dependencies.
note: Installation of dependencies requires an active internet connection.
warning: Missing REQUIRED dependency for option 'network': libcrypto (libcrypto - OpenSSL cryptographic library)
warning: Missing REQUIRED dependency for option 'network': libnetsnmp-devel (libnetsnmp-devel - SNMP networking library development files)
warning: Missing REQUIRED dependency for option 'fax': dbus (DBus - Message bus system)
warning: Missing REQUIRED dependency for option 'scan': sane-devel (SANE - Scanning library development files)
warning: Missing OPTIONAL dependency for option 'scan': xsane (xsane - Graphical scanner frontend for SANE)

CHECKING FOR NETWORK CONNECTION
-------------------------------
Network connection present.

RUNNING PRE-PACKAGE COMMANDS
----------------------------
sudo dpkg --configure -a (Pre-depend step 1)
sudo apt-get install --yes --force-yes -f (Pre-depend step 2)
sudo apt-get update (Pre-depend step 3)
OK

DEPENDENCY AND CONFLICT RESOLUTION
----------------------------------
Running 'sudo apt-get install --assume-yes build-essential'
Please wait, this may take several minutes...
Running 'sudo apt-get install --assume-yes python-dev'
Please wait, this may take several minutes...
Running 'sudo apt-get install --assume-yes libcups2-dev'
Please wait, this may take several minutes...
Running 'sudo apt-get install --assume-yes cups-bsd'
Please wait, this may take several minutes...
Running 'sudo apt-get install --assume-yes cups-client'
Please wait, this may take several minutes...
Running 'sudo apt-get install --assume-yes libusb-1.0.0-dev'
Please wait, this may take several minutes...
Running 'sudo apt-get install --assume-yes libtool'
Please wait, this may take several minutes...
Running 'sudo apt-get install --assume-yes libcupsimage2-dev'
Please wait, this may take several minutes...
Running 'sudo apt-get install --assume-yes libjpeg-dev'
Please wait, this may take several minutes...
Running 'sudo apt-get install --assume-yes openssl'
Please wait, this may take several minutes...
Running 'sudo apt-get install --assume-yes libsnmp-dev'
Please wait, this may take several minutes...
Running 'sudo apt-get install --assume-yes snmp-mibs-downloader'
Please wait, this may take several minutes...
Running 'sudo apt-get install --assume-yes libdbus-1-dev'
Please wait, this may take several minutes...
Running 'sudo apt-get install --assume-yes libsane-dev'
Please wait, this may take several minutes...
Running 'sudo apt-get install --assume-yes gtk2-engines-pixbuf'
Please wait, this may take several minutes...
Running 'sudo apt-get install --assume-yes xsane'
Please wait, this may take several minutes...
HPLIP-3.14.3 exists, this may conflict with the new one being installed.
Do you want to ('i'= Remove and Install*, 'o'= Overwrite, 'q'= Quit)?

RUNNING POST-PACKAGE COMMANDS
-----------------------------
OK

RE-CHECKING DEPENDENCIES
------------------------

PRE-BUILD COMMANDS
------------------
OK

BUILD AND INSTALL
-----------------
Running './configure --with-hpppddir=/usr/share/ppd/HP --prefix=/usr --enable-udev-acl-rules --enable-qt4 --disable-libusb01_build --enable-doc-build --disable-cups-ppd-install --disable-foomatic-drv-install --disable-foomatic-ppd-install --disable-hpijs-install --disable-udev_sysfs_rules --disable-policykit --enable-cups-drv-install --enable-hpcups-install --enable-network-build --enable-dbus-build --enable-scan-build --enable-fax-build'
Please wait, this may take several minutes...
Command completed successfully.

Running 'make clean'
Please wait, this may take several minutes...
Command completed successfully.

Running 'make'
Please wait, this may take several minutes...
Command completed successfully.

Running 'sudo make install'
Please wait, this may take several minutes...
Command completed successfully.

Build complete.

POST-BUILD COMMANDS
-------------------

CLOSE HP_SYSTRAY
----------------
Sending close message to hp-systray (if it is currently running)...

HPLIP UPDATE NOTIFICATION
-------------------------
Do you want to check for HPLIP updates?. (y=yes*, n=no) : n

RESTART OR RE-PLUG IS REQUIRED
------------------------------
If you are installing a USB connected printer, and the printer was plugged in when you started this installer, you will need to either restart your PC or
unplug and re-plug in your printer (USB cable only). If you choose to restart, run this command after restarting: hp-setup (Note: If you are using a
parallel connection, you will have to restart your PC. If you are using network/wireless, you can ignore and continue).

Restart or re-plug in your printer (r=restart, p=re-plug in*, i=ignore/continue, q=quit) : p
Please unplug and re-plugin your printer now. Press <enter> to continue or 'q' to quit:

PRINTER SETUP
-------------
Please make sure your printer is connected and powered on at this time.

RE-STARTING HP_SYSTRAY
----------------------

HP Linux Imaging and Printing System (ver. 3.14.4)
System Tray Status Service ver. 2.0

Copyright (c) 2001-13 Hewlett-Packard Development Company, LP
This software comes with ABSOLUTELY NO WARRANTY.
This is free software, and you are welcome to distribute it
under certain conditions. See COPYING file for more details.

/usr/lib/python2.7/dist-packages/gtk-2.0/gtk/__init__.py:127: RuntimeWarning: PyOS_InputHook is not available for interactive use of PyGTK
set_interactive(1)
1404:~/下载$

-----------===========
弹出对话框后续

试试hp别的型号，向下兼容嘛。

重复贴 ---------请斑竹删除

重复贴，请斑竹删除

请参考HPLIP：LinuxMint/Ubuntu驱动HP打印机的注意事项
http://www.mintos.org/config/hplip-skill.html

-----------------------------------------------重复贴-----------请斑竹删除

-----------------------------------------------重复贴-----------请斑竹删除

zyfz 写了：请参考HPLIP：LinuxMint/Ubuntu驱动HP打印机的注意事项
http://www.mintos.org/config/hplip-skill.html

谢谢，参考以上网址中-----hplip-plugin 下载地址-----下载了 hplip-3.14.4-plugin.run 10-Apr-2014 11:20 1.8M
添加打印机，提示引入插件时选择该文件，安装成功。
再次感谢，不然没法办公打印了。

也不知怎么送出感谢？