3G上网卡使用经验（收集贴）

[shietong]

我发了楼上提及的AC560 linux驱动在本论坛，大家看看吧。

但是我不会安装，谁会装？帮我一下吧。

viewtopic.php?f=116&t=204383

[jaw2]

http://bbs.sogo360.com/thread-325-1-1.html

[TD-SCDMA] 原创 在UBUNTU 8.10 用MU350＋sogoVPN实现CMWAP接入成功

我写的帖子 一些经验 希望对大家有所帮助

[xiaoyong]

http://bbs.sogo360.com/thread-325-1-1.html

[TD-SCDMA] 原创 在UBUNTU 8.10 用MU350＋sogoVPN实现CMWAP接入成功

我写的帖子 一些经验 希望对大家有所帮助

The link isn't available now.

[jaw2]

http://bbs.sogo360.com/thread-325-1-1.html

[TD-SCDMA] 原创 在UBUNTU 8.10 用MU350＋sogoVPN实现CMWAP接入成功

我写的帖子 一些经验 希望对大家有所帮助

The link isn't available now.

The link is OK now.

[netdragon]

谢谢楼主，我遇到以下问题，麻烦帮一下。谢谢。


--> WvDial: Internet dialer version 1.60
--> Cannot get information for serial port.
--> Initializing modem.
--> Sending: ATZ
OK
--> Sending: ATE0V1
OK
--> Sending: ATS0=0
OK
--> Sending: AT+CFUN=1
OK
--> Modem initialized.
--> Sending: ATDT*99***1#
--> Waiting for carrier.
ERROR
--> Invalid dial command.
--> Disconnecting at Tue May 26 21:55:15 2009

[roadd]

我只是收集，还没能力解决遇到的这些比较深的问题哦。不过我还没有碰到过这种情况。

[love52196]

根据楼上的操作，有下面的问题：
lic@dell-lic:~$ lsusb
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 007 Device 003: ID 0b97:7772 O2 Micro, Inc. OZ776 CCID Smartcard Reader
Bus 007 Device 002: ID 0b97:7761 O2 Micro, Inc. Oz776 1.1 Hub
Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 034: ID 19d2:0003 ＝＝＝＝＝＝＝＝》刚插入USB时可以认识到
Bus 005 Device 002: ID 0461:4d15 Primax Electronics, Ltd
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
但是日志报错啊？该如何解决？
lic@dell-lic:~$ dmesg | tail -n 30
[13842.156987] sr 12:0:0:0: rejecting I/O to offline device
[13842.280179] usb 5-1: new full speed USB device using uhci_hcd and address 30
[13857.393117] usb 5-1: device descriptor read/64, error -110
[13872.609190] usb 5-1: device descriptor read/64, error -110
[13872.825094] usb 5-1: new full speed USB device using uhci_hcd and address 31
[13887.944148] usb 5-1: device descriptor read/64, error -110
[13903.164045] usb 5-1: device descriptor read/64, error -110
[13903.380269] usb 5-1: new full speed USB device using uhci_hcd and address 32
[13913.792089] usb 5-1: device not accepting address 32, error -110
[13913.904119] usb 5-1: new full speed USB device using uhci_hcd and address 33
[13924.313167] usb 5-1: device not accepting address 33, error -110
[13924.313205] hub 5-0:1.0: unable to enumerate USB device on port 1
[16251.608158] usb 6-1: USB disconnect, address 3
[16625.833047] usb 5-1: new full speed USB device using uhci_hcd and address 34
[16625.953064] usb 5-1: device descriptor read/64, error -71
[16626.229003] usb 5-1: configuration #1 chosen from 1 choice
[16626.253094] scsi13 : SCSI emulation for USB Mass Storage devices
[16626.254105] usb-storage: device found at 34
[16626.254107] usb-storage: waiting for device to settle before scanning
[16631.254195] usb-storage: device scan complete
[16631.257634] scsi 13:0:0:0: CD-ROM ZTE Corp CD-ROM 0.01 PQ: 0 ANSI: 0
[16631.309122] sr1: scsi3-mmc drive: 297x/297x
[16631.309339] sr 13:0:0:0: Attached scsi CD-ROM sr1
[16631.309480] sr 13:0:0:0: Attached scsi generic sg2 type 5
[16631.572200] usb 5-1: reset full speed USB device using uhci_hcd and address 34
[16631.860186] usb 5-1: reset full speed USB device using uhci_hcd and address 34
[16632.128105] usb 5-1: reset full speed USB device using uhci_hcd and address 34
[16632.392152] usb 5-1: reset full speed USB device using uhci_hcd and address 34
[16663.100106] usb 5-1: reset full speed USB device using uhci_hcd and address 34
[16678.212074] usb 5-1: device descriptor read/64, error -110

[love52196]

问题是，系统不认Mu350,挂载不了啊？
那下面就白搭了，哎 Linux号称网络强大，难道了菜鸟了？
高手们指点一下啊？

[roadd]

谢谢楼主，我遇到以下问题，麻烦帮一下。谢谢。


--> WvDial: Internet dialer version 1.60
--> Cannot get information for serial port.
--> Initializing modem.
--> Sending: ATZ
OK
--> Sending: ATE0V1
OK
--> Sending: ATS0=0
OK
--> Sending: AT+CFUN=1
OK
--> Modem initialized.
--> Sending: ATDT*99***1#
--> Waiting for carrier.
ERROR
--> Invalid dial command.
--> Disconnecting at Tue May 26 21:55:15 2009

今天我将自己的mu350刷了最新的P902m2v1.0.1b08版本文件，就出现了这种情况，刷低版本没有这个问题。供参考。

[粢饭糕]

额 能拨号了 但是完了还是不能上网 ping什么都不通 怎么设置路由啊～？怎么能让network mananger知道我连接成功了呢？

我也和你一样的情况，ubuntu8.10， 已经拨号成功但是还是不能上网，有高手帮忙解决下问题所在吗？

--> WvDial: Internet dialer version 1.60
--> Cannot get information for serial port.
--> Initializing modem.
--> Sending: ATX0
ATX0
OK
--> Modem initialized.
--> Sending: ATM1L3DT#777
--> Waiting for carrier.
ATM1L3DT#777
CONNECT
~[7f]}#@!}!}!} }=}!}$}%(}"}&} } } } }#}%B#}%}%}&G~S}9}'}"}(}"HG~
--> Carrier detected. Starting PPP immediately.
--> Starting pppd at Tue Jun 2 10:23:48 2009
--> Pid of pppd: 30727
--> Using interface ppp0
--> pppd: �
--> �`Y9[08]�Z9[08]
--> pppd: �
--> �`Y9[08]�Z9[08]
--> pppd: �
--> �`Y9[08]�Z9[08]
--> pppd: �
--> �`Y9[08]�Z9[08]
--> pppd: �
--> �`Y9[08]�Z9[08]
--> local IP address 114.81.72.105
--> pppd: �
--> �`Y9[08]�Z9[08]
--> remote IP address 115.168.41.13
--> pppd: �
--> �`Y9[08]�Z9[08]
--> primary DNS address 202.96.209.6
--> pppd: �
--> �`Y9[08]�Z9[08]
--> secondary DNS address 202.96.209.134
--> pppd: �
--> �`Y9[08]�Z9[08]

[rapistor]

虽然不用，也要顶下。

[jupiter_2009]

HUAWEI EM660也可以正常使用

[roadd]

mu350常出新的固件文件，刷到最新版本后好像不能拨号了。还不清楚原因。
前面的配置文件在固件为P902M2V1.0.0B10版本时可以正常使用，但刷到最新P902M2V1.0.1B09版本就不行了。但dmesg仍可以看到ttyUSB0-3，看来是配置文件/etc/wvdial.conf需要改一改。
哪位有空研究一下。

[jshmcsj]

我的mu350已经成功。感谢支持啊。
只是手上还有一块zte-mu318的，用该方法无法实现。
有没有哪位大侠对该型号研究过？

[liutao568]

我也刷了P902M2V1.0.1B09，用这个配置成功拨号

[Dialer Defaults]
Init1 = ATZ
Init3 = ATE0V1
Init5 = ATS0=0
Init6 = AT+CGDCONT=1,"IP","cmnet"
Init7 = AT+CFUN=1
Modem Type = USB Modem
Baud = 460800
New PPPD = yes
Modem = /dev/ttyUSB1
ISDN = 0
Phone = *99***1#
Password = any
Username = any
Stupid Mode = 1

使用结果：


liutao568@Matash1ta:~$ sudo wvdial
--> WvDial: Internet dialer version 1.60
--> Cannot get information for serial port.
--> Initializing modem.
--> Sending: ATZ
OK
--> Sending: ATE0V1
OK
--> Sending: ATS0=0
OK
--> Sending: AT+CGDCONT=1,"IP","cmnet"
OK
--> Sending: AT+CFUN=1
OK
--> Modem initialized.
--> Sending: ATDT*99***1#
--> Waiting for carrier.
CONNECT
--> Carrier detected. Starting PPP immediately.
--> Starting pppd at Sat Jun 13 18:13:37 2009
--> Pid of pppd: 6464
--> Using interface ppp0
--> pppd: �/��p�j `�j
--> pppd: �/��p�j `�j
--> pppd: �/��p�j `�j
--> pppd: �/��p�j `�j
--> pppd: �/��p�j `�j
--> pppd: �/��p�j `�j
--> pppd: �/��p�j `�j
--> pppd: �/��p�j `�j
--> local IP address 10.197.158.179
--> pppd: �/��p�j `�j
--> remote IP address 192.168.0.1
--> pppd: �/��p�j `�j
--> primary DNS address 218.201.4.3
--> pppd: �/��p�j `�j