各位大虾帮帮忙 error13:Invalid or unsupported executable format

[xufeng526]

更新内核至2.6.28-15后，重启后提示Error13 的，无法进入。但2.6.28-11内核可以进入系统。
出错语句在 kernel /vmlinuz-2.6.28-15-generic root=UUID=07df1e27-c851-4b93-abcc-2e9e8274befb

附上： sudo fdisk -l 和menu.lst 望各位大虾给予帮忙
Disk /dev/sda: 81.9 GB, 81964302336 bytes
240 heads, 63 sectors/track, 10587 cylinders
Units = cylinders of 15120 * 512 = 7741440 bytes
Disk identifier: 0x1e851e84

Device Boot Start End Blocks Id System
/dev/sda1 * 1 1681 12708328+ c W95 FAT32 (LBA)
/dev/sda2 1682 10587 67329329 f W95 Ext'd (LBA)
/dev/sda5 1682 4911 24418768+ b W95 FAT32
/dev/sda6 4912 6204 9767578+ 83 Linux
/dev/sda7 8530 10587 15558448+ b W95 FAT32
/dev/sda8 6204 6236 240943+ 83 Linux
/dev/sda9 6236 6302 497983+ 82 Linux swap / Solaris
/dev/sda10 6302 8529 16836088+ 83 Linux


menu.lst:
# menu.lst - See: grub(8), info grub, update-grub(8)
# grub-install(8), grub-floppy(8),
# grub-md5-crypt, /usr/share/doc/grub
# and /usr/share/doc/grub-doc/.

## default num
# Set the default entry to the entry number NUM. Numbering starts from 0, and
# the entry number 0 is the default if the command is not used.
#
# You can specify 'saved' instead of a number. In this case, the default entry
# is the entry saved with the command 'savedefault'.
# WARNING: If you are using dmraid do not use 'savedefault' or your
# array will desync and will not let you boot your system.
default 0

## timeout sec
# Set a timeout, in SEC seconds, before automatically booting the default entry
# (normally the first entry defined).
timeout 3

## hiddenmenu
# Hides the menu by default (press ESC to see the menu)
hiddenmenu

# Pretty colours
#color cyan/blue white/blue

## password ['--md5'] passwd
# If used in the first section of a menu file, disable all interactive editing
# control (menu entry editor and command-line) and entries protected by the
# command 'lock'
# e.g. password topsecret
# password --md5 $1$gLhU0/$aW78kHK1QfV3P2b2znUoe/
# password topsecret

#
# examples
#
# title Windows 95/98/NT/2000
# root (hd0,0)
# makeactive
# chainloader +1
#
# title Linux
# root (hd0,1)
# kernel /vmlinuz root=/dev/hda2 ro
#

#
# Put static boot stanzas before and/or after AUTOMAGIC KERNEL LIST

### BEGIN AUTOMAGIC KERNELS LIST
## lines between the AUTOMAGIC KERNELS LIST markers will be modified
## by the debian update-grub script except for the default options below

## DO NOT UNCOMMENT THEM, Just edit them to your needs

## ## Start Default Options ##
## default kernel options
## default kernel options for automagic boot options
## If you want special options for specific kernels use kopt_x_y_z
## where x.y.z is kernel version. Minor versions can be omitted.
## e.g. kopt=root=/dev/hda1 ro
## kopt_2_6_8=root=/dev/hdc1 ro
## kopt_2_6_8_2_686=root=/dev/hdc2 ro
# kopt=root=UUID=07df1e27-c851-4b93-abcc-2e9e8274befb ro

## default grub root device
## e.g. groot=(hd0,0)
# groot=43f17a9e-60c0-4967-be42-42872b0accfb

## should update-grub create alternative automagic boot options
## e.g. alternative=true
## alternative=false
# alternative=true

## should update-grub lock alternative automagic boot options
## e.g. lockalternative=true
## lockalternative=false
# lockalternative=false

## additional options to use with the default boot option, but not with the
## alternatives
## e.g. defoptions=vga=791 resume=/dev/hda5
# defoptions=quiet splash

## should update-grub lock old automagic boot options
## e.g. lockold=false
## lockold=true
# lockold=false

## Xen hypervisor options to use with the default Xen boot option
# xenhopt=

## Xen Linux kernel options to use with the default Xen boot option
# xenkopt=console=tty0

## altoption boot targets option
## multiple altoptions lines are allowed
## e.g. altoptions=(extra menu suffix) extra boot options
## altoptions=(recovery) single
# altoptions=(recovery mode) single

## controls how many kernels should be put into the menu.lst
## only counts the first occurence of a kernel, not the
## alternative kernel options
## e.g. howmany=all
## howmany=7
# howmany=all

## specify if running in Xen domU or have grub detect automatically
## update-grub will ignore non-xen kernels when running in domU and vice versa
## e.g. indomU=detect
## indomU=true
## indomU=false
# indomU=detect

## should update-grub create memtest86 boot option
## e.g. memtest86=true
## memtest86=false
# memtest86=true

## should update-grub adjust the value of the default booted system
## can be true or false
# updatedefaultentry=false

## should update-grub add savedefault to the default options
## can be true or false
# savedefault=false

## ## End Default Options ##

title Ubuntu 9.04, kernel 2.6.28-15-generic
uuid 43f17a9e-60c0-4967-be42-42872b0accfb
kernel /vmlinuz-2.6.28-15-generic root=UUID=07df1e27-c851-4b93-abcc-2e9e8274befb ro quiet splash
initrd /initrd.img-2.6.28-15-generic
quiet

title Ubuntu 9.04, kernel 2.6.28-15-generic (recovery mode)
uuid 43f17a9e-60c0-4967-be42-42872b0accfb
kernel /vmlinuz-2.6.28-15-generic root=UUID=07df1e27-c851-4b93-abcc-2e9e8274befb ro single
initrd /initrd.img-2.6.28-15-generic

title Ubuntu 9.04, kernel 2.6.28-11-generic
uuid 43f17a9e-60c0-4967-be42-42872b0accfb
kernel /vmlinuz-2.6.28-11-generic root=UUID=07df1e27-c851-4b93-abcc-2e9e8274befb ro quiet splash
initrd /initrd.img-2.6.28-11-generic
quiet

title Ubuntu 9.04, kernel 2.6.28-11-generic (recovery mode)
uuid 43f17a9e-60c0-4967-be42-42872b0accfb
kernel /vmlinuz-2.6.28-11-generic root=UUID=07df1e27-c851-4b93-abcc-2e9e8274befb ro single
initrd /initrd.img-2.6.28-11-generic

title Ubuntu 9.04, memtest86+
uuid 43f17a9e-60c0-4967-be42-42872b0accfb
kernel /memtest86+.bin
quiet

### END DEBIAN AUTOMAGIC KERNELS LIST

[adagio]

出错语句在 kernel //vmlinuz-2.6.28-15-generic root=UUID=07df1e27-c851-4b93-abcc-2e9e8274befb

写错了，要这样

kernel /vmlinuz-2.6.28-15-generic root=UUID=07df1e27-c851-4b93-abcc-2e9e8274befb

[xufeng526]

感谢adagio的提醒，已更正。 但问题没有解决啊。

[adagio]

嗯？我意思是说你的menu.lst写错了，既然没写错，是不是内核文件有问题？
你重新安装一次试试