奇怪，只要我装上了新的显卡驱动，我的OpenOffice就启不来。把xorg.conf中的fglrx改回ati，或者去掉
Section "Extensions"
Option "Composite" "0"
EndSection
再重启，就可以了，但运行fglrxinfo,又认不出显卡了.
ati官方驱动（非开源）的安装配置（08/01/19），compiz用户不推荐更新
-
zhuqin_83
- 帖子： 10606
- 注册时间： 2006-05-13 4:02
- 联系：
我说过的吧，最后添加的一段很重要。
为什么就把它删了呢？
这个是典型的输入法冲突，个人感觉和ati也有关，不过，为了3D加速，就归结到输入法头上好了。
具体操作见wiki新手入门指引－快速设置指南输入法设置部分，安装scim-bridge，并修改/etc/xinit/xinput.d/scim。
为什么就把它删了呢？
这个是典型的输入法冲突，个人感觉和ati也有关，不过，为了3D加速，就归结到输入法头上好了。
具体操作见wiki新手入门指引－快速设置指南输入法设置部分，安装scim-bridge，并修改/etc/xinit/xinput.d/scim。
HP Pavilion DV6-2064CA: AMD Turion II Ultra Dual-Core Mobile M640, HD4650, 2GBx2 DDR2-800, Seagate 500GB 7200RPM SATA, BD-ROM
DELL UltraSharp 2209WA
Arch64, Testing repo
DELL UltraSharp 2209WA
Arch64, Testing repo
-
20hz
- 帖子： 26
- 注册时间： 2006-11-16 20:28
我按第二步实行。。
我把下载的驱动放在了桌面。
在执行:
安装驱动
代码:
sudo dpkg -i xorg-driver-fglrx_8.31.5-1*.deb
sudo dpkg -i fglrx-kernel-source_8.31.5-1*.deb
sudo dpkg -i fglrx-control_8.31.5-1*.deb
这里后出现了下面的问题。。
下载 146kB，耗时 8s (17.6kB/s)
正在读取软件包列表... 完成
eehz@eehz-desktop:~$ sudo ln -sf bash /bin/sh
eehz@eehz-desktop:~$ bash ati-driver-installer-8.31.5-x86.x86_64.run --buildpkg Ubuntu/edgy
bash: ati-driver-installer-8.31.5-x86.x86_64.run: No such file or directory
eehz@eehz-desktop:~$ sudo ln -sf dash /bin/sh
eehz@eehz-desktop:~$ sudo dpkg -i xorg-driver-fglrx_8.31.5-1*.deb
dpkg：处理 xorg-driver-fglrx_8.31.5-1*.deb (--install)时出错：
无法访问打包文件: No such file or directory
在处理时有错误发生：
xorg-driver-fglrx_8.31.5-1*.deb
eehz@eehz-desktop:~$ sudo dpkg -i fglrx-kernel-source_8.31.5-1*.deb
dpkg：处理 fglrx-kernel-source_8.31.5-1*.deb (--install)时出错：
无法访问打包文件: No such file or directory
在处理时有错误发生：
fglrx-kernel-source_8.31.5-1*.deb
eehz@eehz-desktop:~$ sudo dpkg -i fglrx-control_8.31.5-1*.deb
dpkg：处理 fglrx-control_8.31.5-1*.deb (--install)时出错：
无法访问打包文件: No such file or directory
在处理时有错误发生：
fglrx-control_8.31.5-1*.deb
eehz@eehz-desktop:~$
不知怎么办
我把下载的驱动放在了桌面。
在执行:
安装驱动
代码:
sudo dpkg -i xorg-driver-fglrx_8.31.5-1*.deb
sudo dpkg -i fglrx-kernel-source_8.31.5-1*.deb
sudo dpkg -i fglrx-control_8.31.5-1*.deb
这里后出现了下面的问题。。
下载 146kB，耗时 8s (17.6kB/s)
正在读取软件包列表... 完成
eehz@eehz-desktop:~$ sudo ln -sf bash /bin/sh
eehz@eehz-desktop:~$ bash ati-driver-installer-8.31.5-x86.x86_64.run --buildpkg Ubuntu/edgy
bash: ati-driver-installer-8.31.5-x86.x86_64.run: No such file or directory
eehz@eehz-desktop:~$ sudo ln -sf dash /bin/sh
eehz@eehz-desktop:~$ sudo dpkg -i xorg-driver-fglrx_8.31.5-1*.deb
dpkg：处理 xorg-driver-fglrx_8.31.5-1*.deb (--install)时出错：
无法访问打包文件: No such file or directory
在处理时有错误发生：
xorg-driver-fglrx_8.31.5-1*.deb
eehz@eehz-desktop:~$ sudo dpkg -i fglrx-kernel-source_8.31.5-1*.deb
dpkg：处理 fglrx-kernel-source_8.31.5-1*.deb (--install)时出错：
无法访问打包文件: No such file or directory
在处理时有错误发生：
fglrx-kernel-source_8.31.5-1*.deb
eehz@eehz-desktop:~$ sudo dpkg -i fglrx-control_8.31.5-1*.deb
dpkg：处理 fglrx-control_8.31.5-1*.deb (--install)时出错：
无法访问打包文件: No such file or directory
在处理时有错误发生：
fglrx-control_8.31.5-1*.deb
eehz@eehz-desktop:~$
不知怎么办
-
20hz
- 帖子： 26
- 注册时间： 2006-11-16 20:28
这是我的 lspci:
00:00.0 Host bridge: Intel Corporation Memory Controller Hub (rev 02)
00:01.0 PCI bridge: Intel Corporation PCI Express Root Port (rev 02)
00:1a.0 USB Controller: Intel Corporation USB UHCI Controller #4 (rev 02)
00:1a.1 USB Controller: Intel Corporation USB UHCI Controller #5 (rev 02)
00:1a.7 USB Controller: Intel Corporation USB2 EHCI Controller #2 (rev 02)
00:1b.0 Audio device: Intel Corporation HD Audio Controller (rev 02)
00:1c.0 PCI bridge: Intel Corporation PCI Express Port 1 (rev 02)
00:1c.4 PCI bridge: Intel Corporation PCI Express Port 5 (rev 02)
00:1c.5 PCI bridge: Intel Corporation PCI Express Port 6 (rev 02)
00:1d.0 USB Controller: Intel Corporation USB UHCI Controller #1 (rev 02)
00:1d.1 USB Controller: Intel Corporation USB UHCI Controller #2 (rev 02)
00:1d.2 USB Controller: Intel Corporation USB UHCI Controller #3 (rev 02)
00:1d.7 USB Controller: Intel Corporation USB2 EHCI Controller #1 (rev 02)
00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev f2)
00:1f.0 ISA bridge: Intel Corporation LPC Interface Controller (rev 02)
00:1f.2 IDE interface: Intel Corporation SATA Controller 1 IDE (rev 02)
00:1f.3 SMBus: Intel Corporation SMBus Controller (rev 02)
00:1f.5 IDE interface: Intel Corporation SATA Controller 2 IDE (rev 02)
01:00.0 VGA compatible controller: ATI Technologies Inc RV530 [Radeon X1600]
01:00.1 Display controller: ATI Technologies Inc RV530 [Radeon X1600] (Secondary)
03:00.0 Ethernet controller: Marvell Technology Group Ltd. 88E8053 PCI-E Gigabit Ethernet Controller (rev 22)
04:00.0 SATA controller: JMicron Technologies, Inc. JMicron 20360/20363 AHCI Controller (rev 02)
04:00.1 IDE interface: JMicron Technologies, Inc. JMicron 20360/20363 AHCI Controller (rev 02)
05:00.0 Multimedia audio controller: Creative Labs SB Live! EMU10k1 (rev 04)
05:00.1 Input device controller: Creative Labs SB Live! MIDI/Game Port (rev 01)
05:06.0 FireWire (IEEE 1394): Texas Instruments TSB43AB23 IEEE-1394a-2000 Controller (PHY/Link)
00:00.0 Host bridge: Intel Corporation Memory Controller Hub (rev 02)
00:01.0 PCI bridge: Intel Corporation PCI Express Root Port (rev 02)
00:1a.0 USB Controller: Intel Corporation USB UHCI Controller #4 (rev 02)
00:1a.1 USB Controller: Intel Corporation USB UHCI Controller #5 (rev 02)
00:1a.7 USB Controller: Intel Corporation USB2 EHCI Controller #2 (rev 02)
00:1b.0 Audio device: Intel Corporation HD Audio Controller (rev 02)
00:1c.0 PCI bridge: Intel Corporation PCI Express Port 1 (rev 02)
00:1c.4 PCI bridge: Intel Corporation PCI Express Port 5 (rev 02)
00:1c.5 PCI bridge: Intel Corporation PCI Express Port 6 (rev 02)
00:1d.0 USB Controller: Intel Corporation USB UHCI Controller #1 (rev 02)
00:1d.1 USB Controller: Intel Corporation USB UHCI Controller #2 (rev 02)
00:1d.2 USB Controller: Intel Corporation USB UHCI Controller #3 (rev 02)
00:1d.7 USB Controller: Intel Corporation USB2 EHCI Controller #1 (rev 02)
00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev f2)
00:1f.0 ISA bridge: Intel Corporation LPC Interface Controller (rev 02)
00:1f.2 IDE interface: Intel Corporation SATA Controller 1 IDE (rev 02)
00:1f.3 SMBus: Intel Corporation SMBus Controller (rev 02)
00:1f.5 IDE interface: Intel Corporation SATA Controller 2 IDE (rev 02)
01:00.0 VGA compatible controller: ATI Technologies Inc RV530 [Radeon X1600]
01:00.1 Display controller: ATI Technologies Inc RV530 [Radeon X1600] (Secondary)
03:00.0 Ethernet controller: Marvell Technology Group Ltd. 88E8053 PCI-E Gigabit Ethernet Controller (rev 22)
04:00.0 SATA controller: JMicron Technologies, Inc. JMicron 20360/20363 AHCI Controller (rev 02)
04:00.1 IDE interface: JMicron Technologies, Inc. JMicron 20360/20363 AHCI Controller (rev 02)
05:00.0 Multimedia audio controller: Creative Labs SB Live! EMU10k1 (rev 04)
05:00.1 Input device controller: Creative Labs SB Live! MIDI/Game Port (rev 01)
05:06.0 FireWire (IEEE 1394): Texas Instruments TSB43AB23 IEEE-1394a-2000 Controller (PHY/Link)
-
20hz
- 帖子： 26
- 注册时间： 2006-11-16 20:28
按一方法安装:
Ubuntu 设置
到了配置驱动我选了，fglrx然后回车。出来这个。
─────────────────────────┤ 正在设定 xserver-xorg ├─────────────────────────┐
│ The X server configuration file associates your video card with a name │
│ that you may provide. This is usually the vendor or brand name followed │
│ by the model name, e.g., "Intel i915", "ATI RADEON X800", or "NVIDIA │
│ GeForce 6600". │
│ │
│ Identifier for your video card: │
│ │
│ Generic Video Card_______________________________________________________ │
│ │
│ <确定>
然后我又回车
┌────────────────────────┤ 正在设定 xserver-xorg ├─────────────────────────┐
│ │
│ Users of PowerPC machines, and users of any computer with multiple ↑
│ video devices, should specify the BusID of the video card in an ▮
│ accepted bus-specific format. ▒
│ ▒
│ Examples: ▒
│ ▒
│ ISA:1 ▒
│ PCI:0:16:0 ▒
│ SBUS:/iommu@0,10000000/sbus@0,10001000/SUNW,tcx@2,800000 ▒
│ ▒
│ ▒
│ For users of multi-head setups, this option will configure only one of ▒
│ the heads. Further configuration will have to be done manually in the ▒
│ X server configuration file, /etc/X11/xorg.conf.
You may wish to use the "lspci -X" command to determine the bus location ▒
│ of your PCI, AGP, or PCI-Express video card. ▒
│ ▒
│ When possible, this question has been pre-answered for you and you ▮
│ should accept the default unless you know it doesn't work. ↓
│
│ <确定>
因为E文不好也不知他写的是啥，所以我按回车。可是发现没回车不管用。只好ESC
然后出来这个。
┌────┤ 正在设定 xserver-xorg ├─────┐
│ Video card's bus identifier: │
│ │
│ PCI:1:0:0_______________________ │
│ │
│ <确定> │
│
然后出来这个。
┌─────────────────────────┤ 正在设定 xserver-xorg ├─────────────────────────┐
│ Typically, the amount of dedicated memory used by the video card is │
│ autodetected by the X server, but some integrated video chips (such as │
│ the Intel i810) have little or no video memory of their own, and instead │
│ borrow main system memory for their needs. │
│ │
│ This parameter should usually be left blank and specified only if the │
│ video card lacks RAM, or if the X server has trouble autodetecting the │
│ RAM size. │
│ │
│ Amount of memory (kB) to be used by the video card: │
│ │
│ _________________________________________________________________________ │
│ │
│ <确定>
然后回车。。出来这个
│
│ X 服务器还可以被配置为通过内核的帧缓冲驱动来执行某些操作(例如视频模式切 │
│ 换)，而非直接与视频硬件进行通讯。 │
│ │
│ 在理论上，两种途径都应该能工作。但在实践中，常常是一个可以而另一个不行。 │
│ 开启此选项可以看作是安全保险，但如果它造成了某些问题，您完全可以将其关闭 │
│ 。 │
│ │
│ 是否使用内核帧缓冲设备接口？ │
│ │
│ <是> <否> │
│
我选了＜是＞回车又出来
────┤ 正在设定 xserver-xorg ├─────────────────────────┐
│ │
│ The default keyboard layout selection for the Xorg server will be based │
│ on a combination of the language and the keyboard layout selected in the │
│ installer. │
│ │
│ Choose this option if you want the keyboard layout to be redetected. Do │
│ not choose it if you want to keep your current layout. │
│ │
│ Autodetect keyboard layout? │
│ │
│ <是> <否> │
│ │
我选了＜是＞回车
┌─────────────────────────┤ 正在设定 xserver-xorg ├─────────────────────────┐
│ For the X server to handle the keyboard correctly, a keyboard layout │
│ must be entered. Available layouts depend on which XKB rule set and │
│ keyboard model were previously selected. │
│ │
│ Experienced users can use any layout supported by the selected XKB rule │
│ set. If the xkeyboard-config package has been unpacked, see the │
│ /etc/X11/xkb/rules directory for available rule sets. │
│ │
│ Users of U.S. English keyboards should enter "us". Users of keyboards │
│ localized for other countries should generally enter their ISO 3166 │
│ country code. E.g., France uses "fr", and Germany uses "de". │
│ │
│ Keyboard layout: │
│ │
│ us_______________________________________________________________________ │
│ │
│ <确定>
然后回车
┌─────────────────────────┤ 正在设定 xserver-xorg ├─────────────────────────┐
│ For the X server to handle the keyboard correctly, a keyboard layout │
│ must be entered. Available layouts depend on which XKB rule set and │
│ keyboard model were previously selected. │
│ │
│ Experienced users can use any layout supported by the selected XKB rule │
│ set. If the xkeyboard-config package has been unpacked, see the │
│ /etc/X11/xkb/rules directory for available rule sets. │
│ │
│ Users of U.S. English keyboards should enter "us". Users of keyboards │
│ localized for other countries should generally enter their ISO 3166 │
│ country code. E.g., France uses "fr", and Germany uses "de". │
│ │
│ Keyboard layout: │
│ │
│ us_______________________________________________________________________ │
│ │
│ <确定>
然后回车
│ │
│ For the X server to handle the keyboard correctly, a keyboard model must ↑
│ be entered. Available models depend on which XKB rule set is in use. ▮
│ ▒
│ With the "xorg" rule set: ▒
│ - pc101: traditional IBM PC/AT style keyboard with 101 keys, common in ▒
│ the United States. Has no "logo" or "menu" keys; ▒
│ - pc104: similar to pc101 model, with additional keys, usually engraved ▒
│ with a "logo" symbol and a "menu" symbol; ▒
│ - pc102: similar to pc101 and often found in Europe. Includes a "< >" ▒
│ key; ▒
│ - pc105: similar to pc104 and often found in Europe. Includes a "< >" ▒
│ key; ▒
│ - macintosh: Macintosh keyboards using the new input layer with Linux ▒
│ keycodes; ↓
│
│ <确定>
│
这步回车就不起做用了。我按了ESC。
────┤ 正在设定 xserver-xorg ├─────┐
│ Keyboard model: │
│ │
│ pc105___________________________ │
│ │
│ <确定>
然后回车。
─────────────────────────┤ 正在设定 xserver-xorg ├─────────────────────────┐
│ │
│ For the X server to handle the keyboard as desired, a keyboard variant │
│ may be entered. Available variants depend on which XKB rule set, model, │
│ and layout were previously selected. │
│ │
│ Many keyboard layouts support an option to treat "dead" keys such as │
│ non-spacing accent marks and diaereses as normal spacing keys, and if │
│ this is the preferred behavior, enter "nodeadkeys". │
│ │
│ Experienced users can use any variant supported by the selected XKB │
│ layout. If the xkeyboard-config package has been unpacked, see the │
│ /etc/X11/xkb/symbols directory for the file corresponding to your │
│ selected layout for available variants. │
│ │
│ Users of U.S. English keyboards should generally leave this entry blank. │
│ │
│ <确定>
然后回车
┌────┤ 正在设定 xserver-xorg ├─────┐
│ Keyboard variant: │
│ │
│ ________________________________ │
│ │
│ <确定>
然后回车
┌─────────────────────────┤ 正在设定 xserver-xorg ├─────────────────────────┐
│ │
│ For the X server to handle the keyboard as desired, keyboard options may ↑
│ be entered. Available options depend on which XKB rule set was ▮
│ previously selected. Not all options will work with every keyboard ▒
│ model and layout. ▒
│ ▒
│ For example, if you wish the Caps Lock key to behave as an additional ▒
│ Control key, you may enter "ctrl:nocaps"; if you would like to switch ▒
│ the Caps Lock and left Control keys, you may enter "ctrl:swapcaps". ▒
│ ▒
│ As another example, some people prefer having the Meta keys available on ▒
│ their keyboard's Alt keys (this is the default), while other people ▒
│ prefer having the Meta keys on the Windows or "logo" keys instead. If ▒
│ you prefer to use your Windows or logo keys as Meta keys, you may enter ▒
│ "altwin:meta_win". ↓
│
│ <确定>
这里回去没起做用。我用了ESC。
┌────┤ 正在设定 xserver-xorg ├─────┐
│ Keyboard options: │
│ │
│ lv3:ralt_switch_________________ │
│ │
│ <确定> │
│ │
└──────────────────────────────────┘
然后我回车
│
│ Mouse protocol: │
│ │
│ ImPS/2 │
│ ExplorerPS/2 │
│ │
│ │
│ <确定> │
│
选了ImPS/2后回车
┌─────────────────────────┤ 正在设定 xserver-xorg ├─────────────────────────┐
│ │
│ Most programs in the X Window System expect the mouse to have 3 buttons │
│ (left, right, and middle). Mice with only 2 buttons can emulate the │
│ presence of a middle button by treating simultaneous clicks or drags of │
│ the left and right buttons as middle button events. │
│ │
│ This option may also be used on mice with 3 or more buttons; the middle │
│ button will continue to work normally. │
│ │
│ Note that mouse buttons in excess of five (counting a scroll wheel as │
│ two buttons, one each for "up" and "down", and a third if the wheel │
│ "clicks") are not yet supported with this configuration tool. │
│ │
│ Emulate 3 button mouse? │
│ │
│ <是> <否> │
│
选了＜是＞然后回车
┌─────────────────────────┤ 正在设定 xserver-xorg ├─────────────────────────┐
│ │
│ This option is recommended to experienced users only. In most cases, ↑
│ all of these modules should be enabled. ▮
│ ▒
│ - glx : support for OpenGL rendering; ▒
│ - dri : support in the X server for DRI (Direct Rendering ▒
│ Infrastructure); ▒
│ - vbe : support for VESA BIOS Extensions. Allows to query ▒
│ the monitor capabilities via the video card; ▒
│ - ddc : support for Data Display Channel, respectively. Allows to ▒
│ query ▒
│ the monitor capabilities via the video card; ▒
│ - int10 : real-mode x86 emulator used to softboot secondary VGA cards. ▒
│ Should be enabled if vbe is enabled; ▒
│ - dbe : enables the double-buffering extension in the server.
Useful for animation and video operations; ▒
│ - extmod: enables many traditional and commonly used extensions, such ▒
│ as ▒
│ shaped windows, shared memory, video mode switching, DGA, and ▒
│ Xv; ▒
│ - record: implements the RECORD extension, often used in server ▒
│ testing; ▒
│ - bitmap: font rasterizer (so are freetype, and type1 modules). ▒
│ ▒
│ ▒
│ For further information about these modules, please consult the X.Org ▮
│ documentation. ↓
│
│ <确定>
│ │
这里回车又不行了。只好ESC然后出来了
┤ 正在设定 xserver-xorg ├────────────────┐
│ X.Org server modules that should be loaded by default: │
│ │
│ [*] bitmap │
│ [ ] dbe │
│ [*] ddc │
│ [*] dri │
│ [*] extmod │
│ [*] freetype │
│ [*] glx │
│ [*] int10 │
│ [ ] record │
│ [*] type1 │
│ [ ] v4l │
│ [*] vbe
我啥也没动然后回车
┌─────────────────────────┤ 正在设定 xserver-xorg ├─────────────────────────┐
│ │
│ The Files section of the X server configuration file tells the X server │
│ where to find server modules, the RGB color database, and font files. │
│ This option is recommended to experienced users only. In most cases, it │
│ should be enabled. │
│ │
│ Disable this option if you want to maintain a custom Files section into │
│ the X.Org server configuration file. This may be needed to remove the │
│ reference to the local font server, add a reference to a different font │
│ server, or rearrange the default set of local font paths. │
│ │
│ Write default Files section to configuration file? │
│ │
│ <是> <否>
然后我选了＜是＞回车
┌─────────────────────────┤ 正在设定 xserver-xorg ├─────────────────────────┐
│ │
│ Many monitors (including LCD's) and video cards support a communication │
│ protocol that allows the monitor's technical characteristics to be │
│ communicated back to the computer. If the monitor and video card │
│ support this protocol, further configuration questions about the monitor │
│ will be pre-answered. │
│ │
│ If autodetection fails, you will be asked for information about the │
│ monitor. │
│ │
│ Attempt monitor autodetection? │
│ │
│ <是> <否> │
我选了＜是＞然后回车，
┌─────────────────────────┤ 正在设定 xserver-xorg ├─────────────────────────┐
│ The X server configuration file associates the monitor with a name that │
│ you may provide. This is usually the vendor or brand name followed by │
│ the model name, e.g., "Sony E200" or "Dell E770s". │
│ │
│ Identifier for the monitor: │
│ │
│ Generic Monitor__________________________________________________________ │
│ │
│ <确定>
然后回车
│
│ [ ] 1920x1200 ↑ │
│ [ ] 1856x1392 ▮ │
│ [ ] 1792x1344 ▒ │
│ [ ] 1680x1050 ▒ │
│ [ ] 1600x1200 ▒ │
│ [ ] 1440x900 ▒ │
│ [ ] 1400x1050 ▒ │
│ [*] 1280x1024 ↓ │
│ │
│ │
│ <确定> │
│
这里我选了1028X1024这是我的显示器支持的分辨率。然后回车
┌─────────────────────────┤ 正在设定 xserver-xorg ├─────────────────────────┐
│ │
│ For the X Window System graphical user interface to operate correctly, │
│ certain characteristics of the monitor must be known. │
│ │
│ The "simple" option will prompt about the monitor's physical size; this │
│ will set some configuration values appropriate for a typical CRT of the │
│ corresponding size, but may be suboptimal for high-quality CRT's. │
│ │
│ The "medium" option will present you with a list of resolutions and │
│ refresh rates, such as "800x600 @ 85Hz"; you should choose the best mode │
│ you wish to use (and that you know the monitor is capable of). │
│ │
│ The "advanced" option will let you specify the monitor's horizontal sync │
│ and vertical refresh tolerances directly. │
│ │
│ <确定>
然后我回车
┌─────────────┤ 正在设定 xserver-xorg ├──────────────┐
│ Method for selecting the monitor characteristics: │
│ │
│ Simple │
│ Medium │
│ Advanced │
│ │
│ │
│ <确定> │
│
默认的情况下 Advanced 是这一项。我没有改动。然后回车。
┌─────────────────────────┤ 正在设定 xserver-xorg ├─────────────────────────┐
│ Please enter either a comma-separated list of discrete values (for │
│ fixed-frequency displays), or a pair of values separated by a dash (all │
│ modern CRT's). This information should be available in the monitor's │
│ manual. Values lower than 30 or higher than 130 are extremely rare. │
│ │
│ Monitor's horizontal sync range: │
│ │
│ 28-64____________________________________________________________________ │
│ │
│ <确定>
然后回车
┌─────────────────────────┤ 正在设定 xserver-xorg ├─────────────────────────┐
│ Please enter either a comma-separated list of discrete values (for │
│ fixed-frequency displays), or a pair of values separated by a dash (all │
│ modern CRT's). This information should be available in the monitor's │
│ manual. Values lower than 50 or higher than 160 are extremely rare. │
│ │
│ Monitor's vertical refresh range: │
│ │
│ 43-60____________________________________________________________________ │
│ │
│ <确定> │
然后回车
┌────────────────────────┤ 正在设定 xserver-xorg ├────────────────────────┐
│ │
│ The monitor synchronization ranges should be autodetected by the X │
│ server in most cases, but sometimes it needs hinting. This option is │
│ for experienced users, and should be left at its default. │
│ │
│ Write monitor sync ranges to the configuration file? │
│ │
│ <是> <否> │
│ │
我选择了＜是＞然后回车
┌─────────────────────────┤ 正在设定 xserver-xorg ├─────────────────────────┐
│ Usually 24-bit color is desirable, but on graphics cards with limited │
│ amounts of framebuffer memory, higher resolutions may be achieved at the │
│ expense of higher color depth. Also, some cards support hardware 3D │
│ acceleration only for certain depths. Consult your video card manual │
│ for more information. │
│ │
│ So-called "32-bit color" is actually 24 bits of color information plus 8 │
│ bits of alpha channel or simple zero padding; the X Window System can │
│ handle both. If you want either, select 24 bits. │
│ │
│ Desired default color depth in bits: │
│ │
│ 16 ▮ │
│ 24 ↓ │
│ │
│ │
│ <确定>
默认是选的是24我没有改动然后回车然后就结束了。
然后出来这个
eehz@eehz-desktop:~$ sudo dpkg-reconfigure xserver-xorg
xserver-xorg postinst warning: not updating /etc/X11/X; file has been
customized
xserver-xorg postinst warning: overwriting possibly-customised configuration
file; backup in /etc/X11/xorg.conf.20061120201931
eehz@eehz-desktop:~$
Ubuntu 设置
到了配置驱动我选了，fglrx然后回车。出来这个。
─────────────────────────┤ 正在设定 xserver-xorg ├─────────────────────────┐
│ The X server configuration file associates your video card with a name │
│ that you may provide. This is usually the vendor or brand name followed │
│ by the model name, e.g., "Intel i915", "ATI RADEON X800", or "NVIDIA │
│ GeForce 6600". │
│ │
│ Identifier for your video card: │
│ │
│ Generic Video Card_______________________________________________________ │
│ │
│ <确定>
然后我又回车
┌────────────────────────┤ 正在设定 xserver-xorg ├─────────────────────────┐
│ │
│ Users of PowerPC machines, and users of any computer with multiple ↑
│ video devices, should specify the BusID of the video card in an ▮
│ accepted bus-specific format. ▒
│ ▒
│ Examples: ▒
│ ▒
│ ISA:1 ▒
│ PCI:0:16:0 ▒
│ SBUS:/iommu@0,10000000/sbus@0,10001000/SUNW,tcx@2,800000 ▒
│ ▒
│ ▒
│ For users of multi-head setups, this option will configure only one of ▒
│ the heads. Further configuration will have to be done manually in the ▒
│ X server configuration file, /etc/X11/xorg.conf.
You may wish to use the "lspci -X" command to determine the bus location ▒
│ of your PCI, AGP, or PCI-Express video card. ▒
│ ▒
│ When possible, this question has been pre-answered for you and you ▮
│ should accept the default unless you know it doesn't work. ↓
│
│ <确定>
因为E文不好也不知他写的是啥，所以我按回车。可是发现没回车不管用。只好ESC
然后出来这个。
┌────┤ 正在设定 xserver-xorg ├─────┐
│ Video card's bus identifier: │
│ │
│ PCI:1:0:0_______________________ │
│ │
│ <确定> │
│
然后出来这个。
┌─────────────────────────┤ 正在设定 xserver-xorg ├─────────────────────────┐
│ Typically, the amount of dedicated memory used by the video card is │
│ autodetected by the X server, but some integrated video chips (such as │
│ the Intel i810) have little or no video memory of their own, and instead │
│ borrow main system memory for their needs. │
│ │
│ This parameter should usually be left blank and specified only if the │
│ video card lacks RAM, or if the X server has trouble autodetecting the │
│ RAM size. │
│ │
│ Amount of memory (kB) to be used by the video card: │
│ │
│ _________________________________________________________________________ │
│ │
│ <确定>
然后回车。。出来这个
│
│ X 服务器还可以被配置为通过内核的帧缓冲驱动来执行某些操作(例如视频模式切 │
│ 换)，而非直接与视频硬件进行通讯。 │
│ │
│ 在理论上，两种途径都应该能工作。但在实践中，常常是一个可以而另一个不行。 │
│ 开启此选项可以看作是安全保险，但如果它造成了某些问题，您完全可以将其关闭 │
│ 。 │
│ │
│ 是否使用内核帧缓冲设备接口？ │
│ │
│ <是> <否> │
│
我选了＜是＞回车又出来
────┤ 正在设定 xserver-xorg ├─────────────────────────┐
│ │
│ The default keyboard layout selection for the Xorg server will be based │
│ on a combination of the language and the keyboard layout selected in the │
│ installer. │
│ │
│ Choose this option if you want the keyboard layout to be redetected. Do │
│ not choose it if you want to keep your current layout. │
│ │
│ Autodetect keyboard layout? │
│ │
│ <是> <否> │
│ │
我选了＜是＞回车
┌─────────────────────────┤ 正在设定 xserver-xorg ├─────────────────────────┐
│ For the X server to handle the keyboard correctly, a keyboard layout │
│ must be entered. Available layouts depend on which XKB rule set and │
│ keyboard model were previously selected. │
│ │
│ Experienced users can use any layout supported by the selected XKB rule │
│ set. If the xkeyboard-config package has been unpacked, see the │
│ /etc/X11/xkb/rules directory for available rule sets. │
│ │
│ Users of U.S. English keyboards should enter "us". Users of keyboards │
│ localized for other countries should generally enter their ISO 3166 │
│ country code. E.g., France uses "fr", and Germany uses "de". │
│ │
│ Keyboard layout: │
│ │
│ us_______________________________________________________________________ │
│ │
│ <确定>
然后回车
┌─────────────────────────┤ 正在设定 xserver-xorg ├─────────────────────────┐
│ For the X server to handle the keyboard correctly, a keyboard layout │
│ must be entered. Available layouts depend on which XKB rule set and │
│ keyboard model were previously selected. │
│ │
│ Experienced users can use any layout supported by the selected XKB rule │
│ set. If the xkeyboard-config package has been unpacked, see the │
│ /etc/X11/xkb/rules directory for available rule sets. │
│ │
│ Users of U.S. English keyboards should enter "us". Users of keyboards │
│ localized for other countries should generally enter their ISO 3166 │
│ country code. E.g., France uses "fr", and Germany uses "de". │
│ │
│ Keyboard layout: │
│ │
│ us_______________________________________________________________________ │
│ │
│ <确定>
然后回车
│ │
│ For the X server to handle the keyboard correctly, a keyboard model must ↑
│ be entered. Available models depend on which XKB rule set is in use. ▮
│ ▒
│ With the "xorg" rule set: ▒
│ - pc101: traditional IBM PC/AT style keyboard with 101 keys, common in ▒
│ the United States. Has no "logo" or "menu" keys; ▒
│ - pc104: similar to pc101 model, with additional keys, usually engraved ▒
│ with a "logo" symbol and a "menu" symbol; ▒
│ - pc102: similar to pc101 and often found in Europe. Includes a "< >" ▒
│ key; ▒
│ - pc105: similar to pc104 and often found in Europe. Includes a "< >" ▒
│ key; ▒
│ - macintosh: Macintosh keyboards using the new input layer with Linux ▒
│ keycodes; ↓
│
│ <确定>
│
这步回车就不起做用了。我按了ESC。
────┤ 正在设定 xserver-xorg ├─────┐
│ Keyboard model: │
│ │
│ pc105___________________________ │
│ │
│ <确定>
然后回车。
─────────────────────────┤ 正在设定 xserver-xorg ├─────────────────────────┐
│ │
│ For the X server to handle the keyboard as desired, a keyboard variant │
│ may be entered. Available variants depend on which XKB rule set, model, │
│ and layout were previously selected. │
│ │
│ Many keyboard layouts support an option to treat "dead" keys such as │
│ non-spacing accent marks and diaereses as normal spacing keys, and if │
│ this is the preferred behavior, enter "nodeadkeys". │
│ │
│ Experienced users can use any variant supported by the selected XKB │
│ layout. If the xkeyboard-config package has been unpacked, see the │
│ /etc/X11/xkb/symbols directory for the file corresponding to your │
│ selected layout for available variants. │
│ │
│ Users of U.S. English keyboards should generally leave this entry blank. │
│ │
│ <确定>
然后回车
┌────┤ 正在设定 xserver-xorg ├─────┐
│ Keyboard variant: │
│ │
│ ________________________________ │
│ │
│ <确定>
然后回车
┌─────────────────────────┤ 正在设定 xserver-xorg ├─────────────────────────┐
│ │
│ For the X server to handle the keyboard as desired, keyboard options may ↑
│ be entered. Available options depend on which XKB rule set was ▮
│ previously selected. Not all options will work with every keyboard ▒
│ model and layout. ▒
│ ▒
│ For example, if you wish the Caps Lock key to behave as an additional ▒
│ Control key, you may enter "ctrl:nocaps"; if you would like to switch ▒
│ the Caps Lock and left Control keys, you may enter "ctrl:swapcaps". ▒
│ ▒
│ As another example, some people prefer having the Meta keys available on ▒
│ their keyboard's Alt keys (this is the default), while other people ▒
│ prefer having the Meta keys on the Windows or "logo" keys instead. If ▒
│ you prefer to use your Windows or logo keys as Meta keys, you may enter ▒
│ "altwin:meta_win". ↓
│
│ <确定>
这里回去没起做用。我用了ESC。
┌────┤ 正在设定 xserver-xorg ├─────┐
│ Keyboard options: │
│ │
│ lv3:ralt_switch_________________ │
│ │
│ <确定> │
│ │
└──────────────────────────────────┘
然后我回车
│
│ Mouse protocol: │
│ │
│ ImPS/2 │
│ ExplorerPS/2 │
│ │
│ │
│ <确定> │
│
选了ImPS/2后回车
┌─────────────────────────┤ 正在设定 xserver-xorg ├─────────────────────────┐
│ │
│ Most programs in the X Window System expect the mouse to have 3 buttons │
│ (left, right, and middle). Mice with only 2 buttons can emulate the │
│ presence of a middle button by treating simultaneous clicks or drags of │
│ the left and right buttons as middle button events. │
│ │
│ This option may also be used on mice with 3 or more buttons; the middle │
│ button will continue to work normally. │
│ │
│ Note that mouse buttons in excess of five (counting a scroll wheel as │
│ two buttons, one each for "up" and "down", and a third if the wheel │
│ "clicks") are not yet supported with this configuration tool. │
│ │
│ Emulate 3 button mouse? │
│ │
│ <是> <否> │
│
选了＜是＞然后回车
┌─────────────────────────┤ 正在设定 xserver-xorg ├─────────────────────────┐
│ │
│ This option is recommended to experienced users only. In most cases, ↑
│ all of these modules should be enabled. ▮
│ ▒
│ - glx : support for OpenGL rendering; ▒
│ - dri : support in the X server for DRI (Direct Rendering ▒
│ Infrastructure); ▒
│ - vbe : support for VESA BIOS Extensions. Allows to query ▒
│ the monitor capabilities via the video card; ▒
│ - ddc : support for Data Display Channel, respectively. Allows to ▒
│ query ▒
│ the monitor capabilities via the video card; ▒
│ - int10 : real-mode x86 emulator used to softboot secondary VGA cards. ▒
│ Should be enabled if vbe is enabled; ▒
│ - dbe : enables the double-buffering extension in the server.
Useful for animation and video operations; ▒
│ - extmod: enables many traditional and commonly used extensions, such ▒
│ as ▒
│ shaped windows, shared memory, video mode switching, DGA, and ▒
│ Xv; ▒
│ - record: implements the RECORD extension, often used in server ▒
│ testing; ▒
│ - bitmap: font rasterizer (so are freetype, and type1 modules). ▒
│ ▒
│ ▒
│ For further information about these modules, please consult the X.Org ▮
│ documentation. ↓
│
│ <确定>
│ │
这里回车又不行了。只好ESC然后出来了
┤ 正在设定 xserver-xorg ├────────────────┐
│ X.Org server modules that should be loaded by default: │
│ │
│ [*] bitmap │
│ [ ] dbe │
│ [*] ddc │
│ [*] dri │
│ [*] extmod │
│ [*] freetype │
│ [*] glx │
│ [*] int10 │
│ [ ] record │
│ [*] type1 │
│ [ ] v4l │
│ [*] vbe
我啥也没动然后回车
┌─────────────────────────┤ 正在设定 xserver-xorg ├─────────────────────────┐
│ │
│ The Files section of the X server configuration file tells the X server │
│ where to find server modules, the RGB color database, and font files. │
│ This option is recommended to experienced users only. In most cases, it │
│ should be enabled. │
│ │
│ Disable this option if you want to maintain a custom Files section into │
│ the X.Org server configuration file. This may be needed to remove the │
│ reference to the local font server, add a reference to a different font │
│ server, or rearrange the default set of local font paths. │
│ │
│ Write default Files section to configuration file? │
│ │
│ <是> <否>
然后我选了＜是＞回车
┌─────────────────────────┤ 正在设定 xserver-xorg ├─────────────────────────┐
│ │
│ Many monitors (including LCD's) and video cards support a communication │
│ protocol that allows the monitor's technical characteristics to be │
│ communicated back to the computer. If the monitor and video card │
│ support this protocol, further configuration questions about the monitor │
│ will be pre-answered. │
│ │
│ If autodetection fails, you will be asked for information about the │
│ monitor. │
│ │
│ Attempt monitor autodetection? │
│ │
│ <是> <否> │
我选了＜是＞然后回车，
┌─────────────────────────┤ 正在设定 xserver-xorg ├─────────────────────────┐
│ The X server configuration file associates the monitor with a name that │
│ you may provide. This is usually the vendor or brand name followed by │
│ the model name, e.g., "Sony E200" or "Dell E770s". │
│ │
│ Identifier for the monitor: │
│ │
│ Generic Monitor__________________________________________________________ │
│ │
│ <确定>
然后回车
│
│ [ ] 1920x1200 ↑ │
│ [ ] 1856x1392 ▮ │
│ [ ] 1792x1344 ▒ │
│ [ ] 1680x1050 ▒ │
│ [ ] 1600x1200 ▒ │
│ [ ] 1440x900 ▒ │
│ [ ] 1400x1050 ▒ │
│ [*] 1280x1024 ↓ │
│ │
│ │
│ <确定> │
│
这里我选了1028X1024这是我的显示器支持的分辨率。然后回车
┌─────────────────────────┤ 正在设定 xserver-xorg ├─────────────────────────┐
│ │
│ For the X Window System graphical user interface to operate correctly, │
│ certain characteristics of the monitor must be known. │
│ │
│ The "simple" option will prompt about the monitor's physical size; this │
│ will set some configuration values appropriate for a typical CRT of the │
│ corresponding size, but may be suboptimal for high-quality CRT's. │
│ │
│ The "medium" option will present you with a list of resolutions and │
│ refresh rates, such as "800x600 @ 85Hz"; you should choose the best mode │
│ you wish to use (and that you know the monitor is capable of). │
│ │
│ The "advanced" option will let you specify the monitor's horizontal sync │
│ and vertical refresh tolerances directly. │
│ │
│ <确定>
然后我回车
┌─────────────┤ 正在设定 xserver-xorg ├──────────────┐
│ Method for selecting the monitor characteristics: │
│ │
│ Simple │
│ Medium │
│ Advanced │
│ │
│ │
│ <确定> │
│
默认的情况下 Advanced 是这一项。我没有改动。然后回车。
┌─────────────────────────┤ 正在设定 xserver-xorg ├─────────────────────────┐
│ Please enter either a comma-separated list of discrete values (for │
│ fixed-frequency displays), or a pair of values separated by a dash (all │
│ modern CRT's). This information should be available in the monitor's │
│ manual. Values lower than 30 or higher than 130 are extremely rare. │
│ │
│ Monitor's horizontal sync range: │
│ │
│ 28-64____________________________________________________________________ │
│ │
│ <确定>
然后回车
┌─────────────────────────┤ 正在设定 xserver-xorg ├─────────────────────────┐
│ Please enter either a comma-separated list of discrete values (for │
│ fixed-frequency displays), or a pair of values separated by a dash (all │
│ modern CRT's). This information should be available in the monitor's │
│ manual. Values lower than 50 or higher than 160 are extremely rare. │
│ │
│ Monitor's vertical refresh range: │
│ │
│ 43-60____________________________________________________________________ │
│ │
│ <确定> │
然后回车
┌────────────────────────┤ 正在设定 xserver-xorg ├────────────────────────┐
│ │
│ The monitor synchronization ranges should be autodetected by the X │
│ server in most cases, but sometimes it needs hinting. This option is │
│ for experienced users, and should be left at its default. │
│ │
│ Write monitor sync ranges to the configuration file? │
│ │
│ <是> <否> │
│ │
我选择了＜是＞然后回车
┌─────────────────────────┤ 正在设定 xserver-xorg ├─────────────────────────┐
│ Usually 24-bit color is desirable, but on graphics cards with limited │
│ amounts of framebuffer memory, higher resolutions may be achieved at the │
│ expense of higher color depth. Also, some cards support hardware 3D │
│ acceleration only for certain depths. Consult your video card manual │
│ for more information. │
│ │
│ So-called "32-bit color" is actually 24 bits of color information plus 8 │
│ bits of alpha channel or simple zero padding; the X Window System can │
│ handle both. If you want either, select 24 bits. │
│ │
│ Desired default color depth in bits: │
│ │
│ 16 ▮ │
│ 24 ↓ │
│ │
│ │
│ <确定>
默认是选的是24我没有改动然后回车然后就结束了。
然后出来这个
eehz@eehz-desktop:~$ sudo dpkg-reconfigure xserver-xorg
xserver-xorg postinst warning: not updating /etc/X11/X; file has been
customized
xserver-xorg postinst warning: overwriting possibly-customised configuration
file; backup in /etc/X11/xorg.conf.20061120201931
eehz@eehz-desktop:~$
-
青菜
- 帖子： 17
- 注册时间： 2006-10-27 17:38
简直太感激楼主了！！！（握手）
我的是X200显卡，好像是装上了，可惜为什么识别不出来呢？
fglrxinfo
display: :0.0 screen: 0
OpenGL vendor string: ATI Technologies Inc.
OpenGL renderer string: RADEON XPRESS Series Generic（这一是不是行为什么不显示X200呢？）
OpenGL version string: 2.0.6011 (8.28.8)
不知道我的是不 是已经搞定了，希望楼主在给指点一下！
lspci
00:00.0 Host bridge: ATI Technologies Inc Unknown device 5a31 (rev 01)
00:01.0 PCI bridge: ATI Technologies Inc RS480 PCI Bridge
00:13.0 USB Controller: ATI Technologies Inc IXP SB400 USB Host Controller
00:13.1 USB Controller: ATI Technologies Inc IXP SB400 USB Host Controller
00:13.2 USB Controller: ATI Technologies Inc IXP SB400 USB2 Host Controller
00:14.0 SMBus: ATI Technologies Inc IXP SB400 SMBus Controller (rev 11)
00:14.1 IDE interface: ATI Technologies Inc Standard Dual Channel PCI IDE Controller ATI
00:14.3 ISA bridge: ATI Technologies Inc IXP SB400 PCI-ISA Bridge
00:14.4 PCI bridge: ATI Technologies Inc IXP SB400 PCI-PCI Bridge
00:14.5 Multimedia audio controller: ATI Technologies Inc IXP SB400 AC'97 Audio Controller (rev 02)
00:14.6 Modem: ATI Technologies Inc ATI SB400 - AC'97 Modem Controller (rev 02)
01:05.0 VGA compatible controller: ATI Technologies Inc RC410 [Radeon Xpress 200M]
02:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10)
02:01.0 CardBus bridge: Ricoh Co Ltd RL5c476 II (rev b3)
02:01.1 Class 0805: Ricoh Co Ltd R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter (rev 17)
02:01.2 System peripheral: Ricoh Co Ltd R5C592 Memory Stick Bus Host Adapter (rev 08)
lopor@lopor-laptop:~$ glxinfo | grep render
direct rendering: Yes
GLX_ATI_pixel_format_float, GLX_ATI_render_texture
OpenGL renderer string: RADEON XPRESS Series Generic
我的是X200显卡，好像是装上了，可惜为什么识别不出来呢？
fglrxinfo
display: :0.0 screen: 0
OpenGL vendor string: ATI Technologies Inc.
OpenGL renderer string: RADEON XPRESS Series Generic（这一是不是行为什么不显示X200呢？）
OpenGL version string: 2.0.6011 (8.28.8)
不知道我的是不 是已经搞定了，希望楼主在给指点一下！
lspci
00:00.0 Host bridge: ATI Technologies Inc Unknown device 5a31 (rev 01)
00:01.0 PCI bridge: ATI Technologies Inc RS480 PCI Bridge
00:13.0 USB Controller: ATI Technologies Inc IXP SB400 USB Host Controller
00:13.1 USB Controller: ATI Technologies Inc IXP SB400 USB Host Controller
00:13.2 USB Controller: ATI Technologies Inc IXP SB400 USB2 Host Controller
00:14.0 SMBus: ATI Technologies Inc IXP SB400 SMBus Controller (rev 11)
00:14.1 IDE interface: ATI Technologies Inc Standard Dual Channel PCI IDE Controller ATI
00:14.3 ISA bridge: ATI Technologies Inc IXP SB400 PCI-ISA Bridge
00:14.4 PCI bridge: ATI Technologies Inc IXP SB400 PCI-PCI Bridge
00:14.5 Multimedia audio controller: ATI Technologies Inc IXP SB400 AC'97 Audio Controller (rev 02)
00:14.6 Modem: ATI Technologies Inc ATI SB400 - AC'97 Modem Controller (rev 02)
01:05.0 VGA compatible controller: ATI Technologies Inc RC410 [Radeon Xpress 200M]
02:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10)
02:01.0 CardBus bridge: Ricoh Co Ltd RL5c476 II (rev b3)
02:01.1 Class 0805: Ricoh Co Ltd R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter (rev 17)
02:01.2 System peripheral: Ricoh Co Ltd R5C592 Memory Stick Bus Host Adapter (rev 08)
lopor@lopor-laptop:~$ glxinfo | grep render
direct rendering: Yes
GLX_ATI_pixel_format_float, GLX_ATI_render_texture
OpenGL renderer string: RADEON XPRESS Series Generic
-
zhuqin_83
- 帖子： 10606
- 注册时间： 2006-05-13 4:02
- 联系：
那个识别不出来又没关系，就是一句话而已，自己都可以随便修改的，甚至我写成nvidia都没人管青菜 写了：简直太感激楼主了！！！（握手）
我的是X200显卡，好像是装上了，可惜为什么识别不出来呢？
fglrxinfo
display: :0.0 screen: 0
OpenGL vendor string: ATI Technologies Inc.
OpenGL renderer string: RADEON XPRESS Series Generic（这一是不是行为什么不显示X200呢？）
OpenGL version string: 2.0.6011 (8.28.8)
不知道我的是不 是已经搞定了，希望楼主在给指点一下！
lspci
00:00.0 Host bridge: ATI Technologies Inc Unknown device 5a31 (rev 01)
00:01.0 PCI bridge: ATI Technologies Inc RS480 PCI Bridge
00:13.0 USB Controller: ATI Technologies Inc IXP SB400 USB Host Controller
00:13.1 USB Controller: ATI Technologies Inc IXP SB400 USB Host Controller
00:13.2 USB Controller: ATI Technologies Inc IXP SB400 USB2 Host Controller
00:14.0 SMBus: ATI Technologies Inc IXP SB400 SMBus Controller (rev 11)
00:14.1 IDE interface: ATI Technologies Inc Standard Dual Channel PCI IDE Controller ATI
00:14.3 ISA bridge: ATI Technologies Inc IXP SB400 PCI-ISA Bridge
00:14.4 PCI bridge: ATI Technologies Inc IXP SB400 PCI-PCI Bridge
00:14.5 Multimedia audio controller: ATI Technologies Inc IXP SB400 AC'97 Audio Controller (rev 02)
00:14.6 Modem: ATI Technologies Inc ATI SB400 - AC'97 Modem Controller (rev 02)
01:05.0 VGA compatible controller: ATI Technologies Inc RC410 [Radeon Xpress 200M]
02:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10)
02:01.0 CardBus bridge: Ricoh Co Ltd RL5c476 II (rev b3)
02:01.1 Class 0805: Ricoh Co Ltd R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter (rev 17)
02:01.2 System peripheral: Ricoh Co Ltd R5C592 Memory Stick Bus Host Adapter (rev 08)
lopor@lopor-laptop:~$ glxinfo | grep render
direct rendering: Yes
GLX_ATI_pixel_format_float, GLX_ATI_render_texture
OpenGL renderer string: RADEON XPRESS Series Generic
确实已经装上了，恭喜一下。
HP Pavilion DV6-2064CA: AMD Turion II Ultra Dual-Core Mobile M640, HD4650, 2GBx2 DDR2-800, Seagate 500GB 7200RPM SATA, BD-ROM
DELL UltraSharp 2209WA
Arch64, Testing repo
DELL UltraSharp 2209WA
Arch64, Testing repo
-
zhuqin_83
- 帖子： 10606
- 注册时间： 2006-05-13 4:02
- 联系：
-
zhuqin_83
- 帖子： 10606
- 注册时间： 2006-05-13 4:02
- 联系：
-
zhuqin_83
- 帖子： 10606
- 注册时间： 2006-05-13 4:02
- 联系：
-
20hz
- 帖子： 26
- 注册时间： 2006-11-16 20:28
楼主，
我重装了一次系统。
然后更新完以后上来按您的第二攻略去办。
出现下边的问题。
从这里结束以后。
创建deb包
代码:
sudo ln -sf bash /bin/sh
bash ati-driver-installer-8.31.5-x86.x86_64.run --buildpkg Ubuntu/edgy
sudo ln -sf dash /bin/sh
我把代码写入然后回车。然后写入下段。
sudo dpkg -i xorg-driver-fglrx_8.31.5-1*.deb
sudo dpkg -i fglrx-kernel-source_8.31.5-1*.deb
sudo dpkg -i fglrx-control_8.31.5-1*.deb
出现下边的情况
ln: 目标 ‘xorg-driver-fglrx_8.31.5-1*.deb’ 不是目录
eehz@eehz-desktop:~$ sudo dpkg -i fglrx-kernel-source_8.31.5-1*.deb
dpkg：处理 fglrx-kernel-source_8.31.5-1*.deb (--install)时出错：
无法访问打包文件: No such file or directory
在处理时有错误发生：
fglrx-kernel-source_8.31.5-1*.deb
eehz@eehz-desktop:~$ sudo dpkg -i fglrx-control_8.31.5-1*.deb
dpkg：处理 fglrx-control_8.31.5-1*.deb (--install)时出错：
无法访问打包文件: No such file or directory
在处理时有错误发生：
fglrx-control_8.31.5-1*.deb
eehz@eehz-desktop:~$ sudo ln -sf bash /bin/sh
eehz@eehz-desktop:~$ bash ati-driver-installer-8.31.5-x86.x86_64.run --buildpkg Ubuntu/edgy
bash: ati-driver-installer-8.31.5-x86.x86_64.run: No such file or directory
eehz@eehz-desktop:~$ sudo ln -sf dash /bin/sh
eehz@eehz-desktop:~$ sudo dpkg -i xorg-driver-fglrx_8.31.5-1*.deb
dpkg：处理 xorg-driver-fglrx_8.31.5-1*.deb (--install)时出错：
无法访问打包文件: No such file or directory
在处理时有错误发生：
xorg-driver-fglrx_8.31.5-1*.deb
eehz@eehz-desktop:~$ sudo dpkg -i fglrx-kernel-source_8.31.5-1*.deb
dpkg：处理 fglrx-kernel-source_8.31.5-1*.deb (--install)时出错：
无法访问打包文件: No such file or directory
在处理时有错误发生：
fglrx-kernel-source_8.31.5-1*.deb
eehz@eehz-desktop:~$ sudo dpkg -i fglrx-control_8.31.5-1*.deb
dpkg：处理 fglrx-control_8.31.5-1*.deb (--install)时出错：
无法访问打包文件: No such file or directory
在处理时有错误发生：
fglrx-control_8.31.5-1*.deb
eehz@eehz-desktop:~$ sudo ln -sf bash /bin/sh
eehz@eehz-desktop:~$ bash ati-driver-installer-8.31.5-x86.x86_64.run --buildpkg Ubuntu/edgy
bash: ati-driver-installer-8.31.5-x86.x86_64.run: No such file or directory
eehz@eehz-desktop:~$ sudo ln -sf dash /bin/sh
eehz@eehz-desktop:~$ sudo dpkg -i xorg-driver-fglrx_8.31.5-1*.deb
dpkg：处理 xorg-driver-fglrx_8.31.5-1*.deb (--install)时出错：
无法访问打包文件: No such file or directory
在处理时有错误发生：
xorg-driver-fglrx_8.31.5-1*.deb
eehz@eehz-desktop:~$ sudo dpkg -i fglrx-kernel-source_8.31.5-1*.deb
dpkg：处理 fglrx-kernel-source_8.31.5-1*.deb (--install)时出错：
无法访问打包文件: No such file or directory
在处理时有错误发生：
fglrx-kernel-source_8.31.5-1*.deb
eehz@eehz-desktop:~$ sudo dpkg -i fglrx-control_8.31.5-1*.deb
我很菜，但我要变的不菜。所以麻烦一下了
我重装了一次系统。
然后更新完以后上来按您的第二攻略去办。
出现下边的问题。
从这里结束以后。
创建deb包
代码:
sudo ln -sf bash /bin/sh
bash ati-driver-installer-8.31.5-x86.x86_64.run --buildpkg Ubuntu/edgy
sudo ln -sf dash /bin/sh
我把代码写入然后回车。然后写入下段。
sudo dpkg -i xorg-driver-fglrx_8.31.5-1*.deb
sudo dpkg -i fglrx-kernel-source_8.31.5-1*.deb
sudo dpkg -i fglrx-control_8.31.5-1*.deb
出现下边的情况
ln: 目标 ‘xorg-driver-fglrx_8.31.5-1*.deb’ 不是目录
eehz@eehz-desktop:~$ sudo dpkg -i fglrx-kernel-source_8.31.5-1*.deb
dpkg：处理 fglrx-kernel-source_8.31.5-1*.deb (--install)时出错：
无法访问打包文件: No such file or directory
在处理时有错误发生：
fglrx-kernel-source_8.31.5-1*.deb
eehz@eehz-desktop:~$ sudo dpkg -i fglrx-control_8.31.5-1*.deb
dpkg：处理 fglrx-control_8.31.5-1*.deb (--install)时出错：
无法访问打包文件: No such file or directory
在处理时有错误发生：
fglrx-control_8.31.5-1*.deb
eehz@eehz-desktop:~$ sudo ln -sf bash /bin/sh
eehz@eehz-desktop:~$ bash ati-driver-installer-8.31.5-x86.x86_64.run --buildpkg Ubuntu/edgy
bash: ati-driver-installer-8.31.5-x86.x86_64.run: No such file or directory
eehz@eehz-desktop:~$ sudo ln -sf dash /bin/sh
eehz@eehz-desktop:~$ sudo dpkg -i xorg-driver-fglrx_8.31.5-1*.deb
dpkg：处理 xorg-driver-fglrx_8.31.5-1*.deb (--install)时出错：
无法访问打包文件: No such file or directory
在处理时有错误发生：
xorg-driver-fglrx_8.31.5-1*.deb
eehz@eehz-desktop:~$ sudo dpkg -i fglrx-kernel-source_8.31.5-1*.deb
dpkg：处理 fglrx-kernel-source_8.31.5-1*.deb (--install)时出错：
无法访问打包文件: No such file or directory
在处理时有错误发生：
fglrx-kernel-source_8.31.5-1*.deb
eehz@eehz-desktop:~$ sudo dpkg -i fglrx-control_8.31.5-1*.deb
dpkg：处理 fglrx-control_8.31.5-1*.deb (--install)时出错：
无法访问打包文件: No such file or directory
在处理时有错误发生：
fglrx-control_8.31.5-1*.deb
eehz@eehz-desktop:~$ sudo ln -sf bash /bin/sh
eehz@eehz-desktop:~$ bash ati-driver-installer-8.31.5-x86.x86_64.run --buildpkg Ubuntu/edgy
bash: ati-driver-installer-8.31.5-x86.x86_64.run: No such file or directory
eehz@eehz-desktop:~$ sudo ln -sf dash /bin/sh
eehz@eehz-desktop:~$ sudo dpkg -i xorg-driver-fglrx_8.31.5-1*.deb
dpkg：处理 xorg-driver-fglrx_8.31.5-1*.deb (--install)时出错：
无法访问打包文件: No such file or directory
在处理时有错误发生：
xorg-driver-fglrx_8.31.5-1*.deb
eehz@eehz-desktop:~$ sudo dpkg -i fglrx-kernel-source_8.31.5-1*.deb
dpkg：处理 fglrx-kernel-source_8.31.5-1*.deb (--install)时出错：
无法访问打包文件: No such file or directory
在处理时有错误发生：
fglrx-kernel-source_8.31.5-1*.deb
eehz@eehz-desktop:~$ sudo dpkg -i fglrx-control_8.31.5-1*.deb
我很菜，但我要变的不菜。所以麻烦一下了
-
zhuqin_83
- 帖子： 10606
- 注册时间： 2006-05-13 4:02
- 联系：
-
zhuqin_83
- 帖子： 10606
- 注册时间： 2006-05-13 4:02
- 联系：