还是无线网卡，资料齐全，大家分析下！（停止求助！）

系统安装、升级讨论
版面规则
我们都知道新人的确很菜，也喜欢抱怨，并且带有浓厚的Windows习惯，但既然在这里询问，我们就应该有责任帮助他们解决问题，而不是直接泼冷水、简单的否定或发表对解决问题没有任何帮助的帖子。乐于分享，以人为本，这正是Ubuntu的精神所在。
回复
youngcmu
帖子： 92
注册时间： 2006-12-30 16:29

#16

帖子 由 youngcmu » 2007-03-21 22:10

论坛里的我都看过了，有的也试过了。
不过现在看肯定会理解不同了。马上寝室熄灯了。明天早上研究了。
谢谢您啊~！
页首
01ago
帖子： 100
注册时间： 2006-10-27 17:06

#17

帖子 由 01ago » 2007-03-21 22:42

我的7.04版Ubuntu+TP-link WN321G也有这个现象啊
新装的7.04 Herd3
页首
youngcmu
帖子： 92
注册时间： 2006-12-30 16:29

#18

帖子 由 youngcmu » 2007-03-22 10:09

对呀，到现在我也不知道是什么原因。自从装了客户端和networkmanager之后，成功上网2次，以后就总是有问题了。总是提示ath0 doesn't exists.
高人给看看啊！
页首
youngcmu
帖子： 92
注册时间： 2006-12-30 16:29

#19

帖子 由 youngcmu » 2007-03-22 11:48

代码： 全选

:~$ sudo ifup ath0
Ignoring unknown interface ath0=ath0.


simon@simon-desktop:~$ ifconfig
ath0      链路封装:以太网  硬件地址 00:14:78:75:C1:9B  
          UP BROADCAST MULTICAST  MTU:1500  跃点数:1
          接收数据包:162 错误:0 丢弃:0 过载:0 帧数:0
          发送数据包:28 错误:0 丢弃:0 过载:0 载波:0
          碰撞:0 发送队列长度:0 
          接收字节:17260 (16.8 KiB)  发送字节:6136 (5.9 KiB)

eth0      链路封装:以太网  硬件地址 00:15:F2:14:27:7A  
          UP BROADCAST MULTICAST  MTU:1500  跃点数:1
          接收数据包:0 错误:0 丢弃:0 过载:0 帧数:0
          发送数据包:0 错误:0 丢弃:0 过载:0 载波:0
          碰撞:0 发送队列长度:1000 
          接收字节:0 (0.0 b)  发送字节:0 (0.0 b)
          中断:193 基本地址:0xb000 

lo        链路封装:本地环回  
          inet 地址:127.0.0.1  掩码:255.0.0.0
          inet6 地址: ::1/128 Scope:Host
          UP LOOPBACK RUNNING  MTU:16436  跃点数:1
          接收数据包:16 错误:0 丢弃:0 过载:0 帧数:0
          发送数据包:16 错误:0 丢弃:0 过载:0 载波:0
          碰撞:0 发送队列长度:0 
          接收字节:800 (800.0 b)  发送字节:800 (800.0 b)

wifi0     链路封装:未指定  硬件地址 00-14-78-75-C1-9B-00-00-00-00-00-00-00-00-00-00  
          UP BROADCAST RUNNING MULTICAST  MTU:1500  跃点数:1
          接收数据包:12505 错误:0 丢弃:0 过载:0 帧数:4412
          发送数据包:585 错误:0 丢弃:0 过载:0 载波:0
          碰撞:0 发送队列长度:199 
          接收字节:1069462 (1.0 MiB)  发送字节:32322 (31.5 KiB)
          中断:185 Memory:e0a40000-e0a50000 

:~$ sudo gedit /etc/network/interfaces
Launching a SCIM daemon with Socket FrontEnd...
Loading simple Config module ...
Creating backend ...
Loading socket FrontEnd module ...
Starting SCIM as daemon ...
GTK Panel of SCIM 1.4.4

~$ sudo rmmod net5211  #xp下的无线网卡驱动
ERROR: Module net5211 does not exist in /proc/modules
页首
头像
laborer
帖子： 1016
注册时间： 2005-10-25 11:15
联系：
联系 laborer

#20

帖子 由 laborer » 2007-03-22 12:35

代码： 全选

ath0      链路封装:以太网  硬件地址 00:14:78:75:C1:9B  
          UP BROADCAST MULTICAST  MTU:1500  跃点数:1
          接收数据包:162 错误:0 丢弃:0 过载:0 帧数:0
          发送数据包:28 错误:0 丢弃:0 过载:0 载波:0
          碰撞:0 发送队列长度:0 
          接收字节:17260 (16.8 KiB)  发送字节:6136 (5.9 KiB)
看上去比较正常，有接受／有发送。但没有设置ip地址。

代码： 全选

wifi0     链路封装:未指定  硬件地址 00-14-78-75-C1-9B-00-00-00-00-00-00-00-00-00-00  
          UP BROADCAST RUNNING MULTICAST  MTU:1500  跃点数:1
          接收数据包:12505 错误:0 丢弃:0 过载:0 帧数:4412
          发送数据包:585 错误:0 丢弃:0 过载:0 载波:0
          碰撞:0 发送队列长度:199 
          接收字节:1069462 (1.0 MiB)  发送字节:32322 (31.5 KiB)
          中断:185 Memory:e0a40000-e0a50000
不知道这个什么？名字是wifi，看上去是处在杂收模式。
你最好把dmesg的输出也贴出来。
hreiser@oakland:~$ killall -9 wife
police@oakland:~$ sudo find / -user hreiser
court@oakland:~$ sudo mv /home/hreiser /jail/
court@oakland:~$ sudo usermod -d /jail/hreiser -s "/usr/sbin/chroot /jail/" hreiser
页首
youngcmu
帖子： 92
注册时间： 2006-12-30 16:29

#21

帖子 由 youngcmu » 2007-03-22 13:04

代码： 全选

:~$ dmesg
[17179569.184000] Linux version 2.6.17-11-generic (root@terranova) (gcc version 4.1.2 20060928 (prerelease) (Ubuntu 4.1.1-13ubuntu5)) #2 SMP Thu Feb 1 19:52:28 UTC 2007 (Ubuntu 2.6.17-11.35-generic)
[17179569.184000] BIOS-provided physical RAM map:
[17179569.184000]  BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[17179569.184000]  BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[17179569.184000]  BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)
[17179569.184000]  BIOS-e820: 0000000000100000 - 000000001ffb0000 (usable)
[17179569.184000]  BIOS-e820: 000000001ffb0000 - 000000001ffc0000 (ACPI data)
[17179569.184000]  BIOS-e820: 000000001ffc0000 - 000000001fff0000 (ACPI NVS)
[17179569.184000]  BIOS-e820: 000000001fff0000 - 0000000020000000 (reserved)
[17179569.184000]  BIOS-e820: 00000000ff780000 - 0000000100000000 (reserved)
[17179569.184000] 0MB HIGHMEM available.
[17179569.184000] 511MB LOWMEM available.
[17179569.184000] found SMP MP-table at 000ff780
[17179569.184000] On node 0 totalpages: 130992
[17179569.184000]   DMA zone: 4096 pages, LIFO batch:0
[17179569.184000]   Normal zone: 126896 pages, LIFO batch:31
[17179569.184000] DMI 2.3 present.
[17179569.184000] ACPI: RSDP (v000 ACPIAM                                ) @ 0x000fab00
[17179569.184000] ACPI: RSDT (v001 A M I  OEMRSDT  0x07000515 MSFT 0x00000097) @ 0x1ffb0000
[17179569.184000] ACPI: FADT (v001 A M I  OEMFACP  0x07000515 MSFT 0x00000097) @ 0x1ffb0200
[17179569.184000] ACPI: MADT (v001 A M I  OEMAPIC  0x07000515 MSFT 0x00000097) @ 0x1ffb0390
[17179569.184000] ACPI: OEMB (v001 A M I  OEMBIOS  0x07000515 MSFT 0x00000097) @ 0x1ffc0040
[17179569.184000] ACPI: DSDT (v001  A0232 A0232008 0x00000008 MSFT 0x0100000d) @ 0x00000000
[17179569.184000] ACPI: PM-Timer IO Port: 0x808
[17179569.184000] ACPI: Local APIC address 0xfee00000
[17179569.184000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[17179569.184000] Processor #0 15:12 APIC version 16
[17179569.184000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[17179569.184000] IOAPIC[0]: apic_id 1, version 3, address 0xfec00000, GSI 0-23
[17179569.184000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[17179569.184000] ACPI: IRQ0 used by override.
[17179569.184000] ACPI: IRQ2 used by override.
[17179569.184000] ACPI: IRQ9 used by override.
[17179569.184000] Enabling APIC mode:  Flat.  Using 1 I/O APICs
[17179569.184000] Using ACPI (MADT) for SMP configuration information
[17179569.184000] Allocating PCI resources starting at 30000000 (gap: 20000000:df780000)
[17179569.184000] Built 1 zonelists
[17179569.184000] Kernel command line: root=/dev/hda8 ro quiet splash locale=zh_CN
[17179569.184000] mapped APIC to ffffd000 (fee00000)
[17179569.184000] mapped IOAPIC to ffffc000 (fec00000)
[17179569.184000] Enabling fast FPU save and restore... done.
[17179569.184000] Enabling unmasked SIMD FPU exception support... done.
[17179569.184000] Initializing CPU#0
[17179569.184000] PID hash table entries: 2048 (order: 11, 8192 bytes)
[17179569.184000] Detected 1602.440 MHz processor.
[17179569.184000] Using pmtmr for high-res timesource
[17179569.184000] Console: colour VGA+ 80x25
[17179570.068000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[17179570.068000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[17179570.080000] Memory: 509536k/523968k available (1911k kernel code, 13912k reserved, 1073k data, 308k init, 0k highmem)
[17179570.080000] Checking if this processor honours the WP bit even in supervisor mode... Ok.
[17179570.160000] Calibrating delay using timer specific routine.. 3208.72 BogoMIPS (lpj=6417450)
[17179570.160000] Security Framework v1.0.0 initialized
[17179570.160000] SELinux:  Disabled at boot.
[17179570.160000] Mount-cache hash table entries: 512
[17179570.160000] CPU: After generic identify, caps: 078bfbff e3d3fbff 00000000 00000000 00000001 00000000 00000001
[17179570.160000] CPU: After vendor identify, caps: 078bfbff e3d3fbff 00000000 00000000 00000001 00000000 00000001
[17179570.160000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[17179570.160000] CPU: L2 Cache: 256K (64 bytes/line)
[17179570.160000] CPU: After all inits, caps: 078bfbff e3d3fbff 00000000 00000410 00000001 00000000 00000001
[17179570.160000] Checking 'hlt' instruction... OK.
[17179570.176000] SMP alternatives: switching to UP code
[17179570.176000] Freeing SMP alternatives: 16k freed
[17179570.176000] checking if image is initramfs... it is
[17179570.756000] Freeing initrd memory: 5624k freed
[17179570.756000] ACPI: Core revision 20060707
[17179570.756000] ACPI: Looking for DSDT ... not found!
[17179570.756000] CPU0: AMD Sempron(tm) Processor 2800+ stepping 02
[17179570.756000] Total of 1 processors activated (3208.72 BogoMIPS).
[17179570.756000] ENABLING IO-APIC IRQs
[17179570.760000] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=0 pin2=0
[17179570.900000] Brought up 1 CPUs
[17179570.900000] migration_cost=0
[17179570.900000] NET: Registered protocol family 16
[17179570.900000] EISA bus registered
[17179570.900000] ACPI: bus type pci registered
[17179570.900000] PCI: PCI BIOS revision 2.10 entry at 0xf0031, last bus=1
[17179570.900000] PCI: Using configuration type 1
[17179570.900000] Setting up standard PCI resources
[17179570.908000] ACPI: Interpreter enabled
[17179570.908000] ACPI: Using IOAPIC for interrupt routing
[17179570.908000] ACPI: PCI Root Bridge [PCI0] (0000:00)
[17179570.908000] PCI: Probing PCI hardware (bus 00)
[17179570.912000] PCI: Ignoring BAR0-3 of IDE controller 0000:00:0f.1
[17179570.912000] PCI: Quirk-MSI-K8T Soundcard On
[17179570.912000] PCI: Unexpected Value in PCI-Register: no Change!
[17179570.912000] PCI: enabled onboard AC97/MC97 devices
[17179570.912000] Boot video device is 0000:01:00.0
[17179570.912000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[17179570.928000] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 10 *11 14 15)
[17179570.928000] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 *10 11 14 15)
[17179570.928000] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 7 10 11 14 15)
[17179570.928000] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 10 11 14 15) *0, disabled.
[17179570.928000] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 10 11 14 15) *0, disabled.
[17179570.928000] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 10 11 14 15) *0, disabled.
[17179570.928000] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 10 11 14 15) *0, disabled.
[17179570.928000] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 10 11 14 15) *0, disabled.
[17179570.928000] Linux Plug and Play Support v0.97 (c) Adam Belay
[17179570.928000] pnp: PnP ACPI init
[17179570.932000] pnp: PnP ACPI: found 14 devices
[17179570.932000] PnPBIOS: Disabled by ACPI PNP
[17179570.932000] PCI: Using ACPI for IRQ routing
[17179570.932000] PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
[17179570.936000] pnp: 00:09: ioport range 0x290-0x297 has been reserved
[17179570.936000] PCI: Bridge: 0000:00:01.0
[17179570.936000]   IO window: disabled.
[17179570.936000]   MEM window: faf00000-fbffffff
[17179570.936000]   PREFETCH window: f0000000-f9ffffff
[17179570.936000] PCI: Setting latency timer of device 0000:00:01.0 to 64
[17179570.936000] NET: Registered protocol family 2
[17179570.976000] IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
[17179570.976000] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
[17179570.976000] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[17179570.976000] TCP: Hash tables configured (established 16384 bind 8192)
[17179570.976000] TCP reno registered
[17179570.976000] audit: initializing netlink socket (disabled)
[17179570.976000] audit(1174567772.976:1): initialized
[17179570.976000] VFS: Disk quotas dquot_6.5.1
[17179570.976000] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[17179570.976000] Initializing Cryptographic API
[17179570.976000] io scheduler noop registered
[17179570.976000] io scheduler anticipatory registered
[17179570.976000] io scheduler deadline registered
[17179570.976000] io scheduler cfq registered (default)
[17179570.976000] isapnp: Scanning for PnP cards...
[17179571.328000] isapnp: No Plug & Play device found
[17179571.352000] Real Time Clock Driver v1.12ac
[17179571.352000] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[17179571.352000] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[17179571.352000] 00:0c: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[17179571.356000] mice: PS/2 mouse device common for all mice
[17179571.356000] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[17179571.356000] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
[17179571.356000] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
[17179571.356000] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
[17179571.356000] serio: i8042 AUX port at 0x60,0x64 irq 12
[17179571.356000] serio: i8042 KBD port at 0x60,0x64 irq 1
[17179571.356000] EISA: Probing bus 0 at eisa.0
[17179571.356000] Cannot allocate resource for EISA slot 1
[17179571.356000] EISA: Detected 0 cards.
[17179571.356000] TCP bic registered
[17179571.356000] NET: Registered protocol family 1
[17179571.356000] NET: Registered protocol family 8
[17179571.356000] NET: Registered protocol family 20
[17179571.356000] Using IPI No-Shortcut mode
[17179571.356000] ACPI: (supports S0 S1 S3 S4 S5)
[17179571.356000] Freeing unused kernel memory: 308k freed
[17179571.380000] input: AT Translated Set 2 keyboard as /class/input/input0
[17179572.492000] Capability LSM initialized
[17179572.996000] SCSI subsystem initialized
[17179573.000000] libata version 1.20 loaded.
[17179573.004000] sata_via 0000:00:0f.0: version 1.1
[17179573.004000] ACPI: PCI Interrupt 0000:00:0f.0[B] -> GSI 20 (level, low) -> IRQ 169
[17179573.004000] PCI: Via IRQ fixup for 0000:00:0f.0, from 10 to 9
[17179573.004000] sata_via 0000:00:0f.0: routed to hard irq line 9
[17179573.004000] ata1: SATA max UDMA/133 cmd 0xE800 ctl 0xE402 bmdma 0xD400 irq 169
[17179573.004000] ata2: SATA max UDMA/133 cmd 0xE000 ctl 0xD802 bmdma 0xD408 irq 169
[17179573.172000] scsi0 : sata_via
[17179573.340000] scsi1 : sata_via
[17179573.372000] VP_IDE: IDE controller at PCI slot 0000:00:0f.1
[17179573.372000] ACPI: PCI Interrupt 0000:00:0f.1[A] -> GSI 20 (level, low) -> IRQ 169
[17179573.372000] PCI: Via IRQ fixup for 0000:00:0f.1, from 255 to 9
[17179573.372000] VP_IDE: chipset revision 6
[17179573.372000] VP_IDE: not 100% native mode: will probe irqs later
[17179573.372000] VP_IDE: VIA vt8237 (rev 00) IDE UDMA133 controller on pci0000:00:0f.1
[17179573.372000]     ide0: BM-DMA at 0xfc00-0xfc07, BIOS settings: hda:DMA, hdb:pio
[17179573.372000]     ide1: BM-DMA at 0xfc08-0xfc0f, BIOS settings: hdc:pio, hdd:DMA
[17179573.372000] Probing IDE interface ide0...
[17179573.796000] hda: ST340810A, ATA DISK drive
[17179574.476000] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
[17179574.476000] Probing IDE interface ide1...
[17179575.620000] hdd: PIONEER DVD-ROM DVD-122P, ATAPI CD/DVD-ROM drive
[17179575.680000] ide1 at 0x170-0x177,0x376 on irq 15
[17179575.692000] hda: max request size: 128KiB
[17179575.692000] hdd: ATAPI 40X DVD-ROM drive, 512kB Cache
[17179575.692000] Uniform CD-ROM driver Revision: 3.20
[17179575.692000] hda: 78165360 sectors (40020 MB) w/2048KiB Cache, CHS=65535/16/63, UDMA(100)
[17179575.692000] hda: cache flushes not supported
[17179575.692000]  hda: hda1 hda2 < hda5 hda6 hda7 hda8 hda9 hda10 hda11 >
[17179579.864000] usbcore: registered new driver usbfs
[17179579.864000] usbcore: registered new driver hub
[17179579.868000] USB Universal Host Controller Interface driver v3.0
[17179579.868000] ACPI: PCI Interrupt 0000:00:10.0[A] -> GSI 21 (level, low) -> IRQ 177
[17179579.868000] PCI: Via IRQ fixup for 0000:00:10.0, from 11 to 1
[17179579.868000] uhci_hcd 0000:00:10.0: UHCI Host Controller
[17179579.868000] uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 1
[17179579.868000] uhci_hcd 0000:00:10.0: irq 177, io base 0x0000b800
[17179579.872000] usb usb1: configuration #1 chosen from 1 choice
[17179579.872000] hub 1-0:1.0: USB hub found
[17179579.872000] hub 1-0:1.0: 2 ports detected
[17179579.976000] ACPI: PCI Interrupt 0000:00:10.1[A] -> GSI 21 (level, low) -> IRQ 177
[17179579.976000] PCI: Via IRQ fixup for 0000:00:10.1, from 11 to 1
[17179579.976000] uhci_hcd 0000:00:10.1: UHCI Host Controller
[17179579.980000] uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 2
[17179579.980000] uhci_hcd 0000:00:10.1: irq 177, io base 0x0000c000
[17179579.980000] usb usb2: configuration #1 chosen from 1 choice
[17179579.980000] hub 2-0:1.0: USB hub found
[17179579.980000] hub 2-0:1.0: 2 ports detected
[17179580.084000] ACPI: PCI Interrupt 0000:00:10.2[B] -> GSI 21 (level, low) -> IRQ 177
[17179580.084000] PCI: Via IRQ fixup for 0000:00:10.2, from 10 to 1
[17179580.084000] uhci_hcd 0000:00:10.2: UHCI Host Controller
[17179580.084000] uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 3
[17179580.084000] uhci_hcd 0000:00:10.2: irq 177, io base 0x0000c400
[17179580.084000] usb usb3: configuration #1 chosen from 1 choice
[17179580.088000] hub 3-0:1.0: USB hub found
[17179580.088000] hub 3-0:1.0: 2 ports detected
[17179580.192000] ACPI: PCI Interrupt 0000:00:10.3[B] -> GSI 21 (level, low) -> IRQ 177
[17179580.192000] PCI: Via IRQ fixup for 0000:00:10.3, from 10 to 1
[17179580.192000] uhci_hcd 0000:00:10.3: UHCI Host Controller
[17179580.192000] uhci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 4
[17179580.192000] uhci_hcd 0000:00:10.3: irq 177, io base 0x0000c800
[17179580.192000] usb usb4: configuration #1 chosen from 1 choice
[17179580.196000] hub 4-0:1.0: USB hub found
[17179580.196000] hub 4-0:1.0: 2 ports detected
[17179580.304000] ACPI: PCI Interrupt 0000:00:10.4[C] -> GSI 21 (level, low) -> IRQ 177
[17179580.304000] PCI: Via IRQ fixup for 0000:00:10.4, from 5 to 1
[17179580.304000] ehci_hcd 0000:00:10.4: EHCI Host Controller
[17179580.304000] ehci_hcd 0000:00:10.4: new USB bus registered, assigned bus number 5
[17179580.304000] ehci_hcd 0000:00:10.4: irq 177, io mem 0xfac00000
[17179580.304000] ehci_hcd 0000:00:10.4: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[17179580.304000] usb usb5: configuration #1 chosen from 1 choice
[17179580.304000] hub 5-0:1.0: USB hub found
[17179580.304000] hub 5-0:1.0: 8 ports detected
[17179580.480000] Attempting manual resume
[17179580.528000] kjournald starting.  Commit interval 5 seconds
[17179580.528000] EXT3-fs: mounted filesystem with ordered data mode.
[17179594.516000] ath_hal: module license 'Proprietary' taints kernel.
[17179594.516000] ath_hal: 0.9.17.2 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413)
[17179594.728000] wlan: 0.8.4.2 (0.9.2.1)
[17179594.904000] ath_rate_sample: 1.2 (0.9.2.1)
[17179596.160000] input: PC Speaker as /class/input/input1
[17179596.828000] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[17179597.400000] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[17179598.396000] Floppy drive(s): fd0 is 1.44M
[17179598.424000] FDC 0 is a post-1991 82077
[17179598.944000] parport: PnPBIOS parport detected.
[17179598.944000] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,EPP,ECP,DMA]
[17179599.496000] ath_pci: 0.9.4.5 (0.9.2.1)
[17179599.496000] ACPI: PCI Interrupt 0000:00:0b.0[A] -> GSI 16 (level, low) -> IRQ 185
[17179600.092000] via-rhine.c:v1.10-LK1.2.0-2.6 June-10-2004 Written by Donald Becker
[17179600.100000] wifi0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps
[17179600.100000] wifi0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
[17179600.100000] wifi0: H/W encryption support: WEP AES AES_CCM TKIP
[17179600.100000] wifi0: mac 7.8 phy 4.5 radio 5.6
[17179600.100000] wifi0: Use hw queue 1 for WME_AC_BE traffic
[17179600.100000] wifi0: Use hw queue 0 for WME_AC_BK traffic
[17179600.100000] wifi0: Use hw queue 2 for WME_AC_VI traffic
[17179600.100000] wifi0: Use hw queue 3 for WME_AC_VO traffic
[17179600.100000] wifi0: Use hw queue 8 for CAB traffic
[17179600.100000] wifi0: Use hw queue 9 for beacons
[17179600.296000] Linux agpgart interface v0.101 (c) Dave Jones
[17179600.424000] wifi0: Atheros 5212: mem=0xfae00000, irq=185
[17179600.424000] ACPI: PCI Interrupt 0000:00:12.0[A] -> GSI 23 (level, low) -> IRQ 193
[17179600.424000] PCI: Via IRQ fixup for 0000:00:12.0, from 11 to 1
[17179600.424000] eth0: VIA Rhine II at 0x1b000, 00:15:f2:14:27:7a, IRQ 193.
[17179600.424000] eth0: MII PHY found at address 1, status 0x7849 advertising 01e1 Link 0000.
[17179600.424000] agpgart: Detected AGP bridge 0
[17179600.424000] agpgart: AGP aperture is 32M @ 0xec000000
[17179600.676000] PCI: Enabling device 0000:00:11.6 (0000 -> 0001)
[17179600.676000] ACPI: PCI Interrupt 0000:00:11.6[C] -> GSI 22 (level, low) -> IRQ 201
[17179600.676000] PCI: Via IRQ fixup for 0000:00:11.6, from 0 to 9
[17179601.100000] input: ImPS/2 Generic Wheel Mouse as /class/input/input2
[17179601.120000] ts: Compaq touchscreen protocol output
[17179601.432000] PCI: Setting latency timer of device 0000:00:11.6 to 64
[17179601.936000] ACPI: PCI interrupt for device 0000:00:11.6 disabled
[17179601.936000] VIA 82xx Modem: probe of 0000:00:11.6 failed with error -13
[17179601.936000] ACPI: PCI Interrupt 0000:00:11.5[C] -> GSI 22 (level, low) -> IRQ 201
[17179601.936000] PCI: Via IRQ fixup for 0000:00:11.5, from 5 to 9
[17179601.936000] PCI: Setting latency timer of device 0000:00:11.5 to 64
[17179602.452000] codec_read: codec 0 is not valid [0xfe0000]
[17179602.460000] codec_read: codec 0 is not valid [0xfe0000]
[17179602.464000] codec_read: codec 0 is not valid [0xfe0000]
[17179602.472000] codec_read: codec 0 is not valid [0xfe0000]
[17179773.876000] lp0: using parport0 (interrupt-driven).
[17179773.912000] Adding 297160k swap on /dev/disk/by-uuid/e71cdebe-3d25-41c9-ba60-11f8deebabcc.  Priority:-1 extents:1 across:297160k
[17179773.964000] EXT3 FS on hda8, internal journal
[17179774.152000] NTFS driver 2.1.27 [Flags: R/O MODULE].
[17179774.152000] NTFS-fs warning (device hda1): parse_options(): Option iocharset is deprecated. Please use option nls=<charsetname> in the future.
[17179774.232000] NTFS volume version 3.1.
[17179774.300000] FAT: utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
[17179774.388000] FAT: utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
[17179774.424000] FAT: utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
[17179774.460000] FAT: utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
[17179774.536000] FAT: utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
[17179774.808000] ndiswrapper version 1.38 loaded (preempt=no,smp=yes)
[17179774.916000] usbcore: registered new driver ndiswrapper
[17179776.004000] NET: Registered protocol family 17
[17179776.976000] ACPI: Power Button (FF) [PWRF]
[17179776.976000] ACPI: Power Button (CM) [PWRB]
[17179776.976000] ACPI: Sleep Button (CM) [SLPB]
[17179777.092000] ibm_acpi: ec object not found
[17179777.120000] pcc_acpi: loading...
[17179777.460000] powernow-k8: Power state transitions not supported
[17179779.416000] apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
[17179779.416000] apm: overridden by ACPI.
[17179804.676000] NET: Registered protocol family 10
[17179804.676000] lo: Disabled Privacy Extensions
[17179804.676000] IPv6 over IPv4 tunneling driver
[17179804.740000] eth0: link down
[17179804.740000] ADDRCONF(NETDEV_UP): eth0: link is not ready
[17179806.568000] Bluetooth: Core ver 2.8
[17179806.568000] NET: Registered protocol family 31
[17179806.568000] Bluetooth: HCI device and connection manager initialized
[17179806.568000] Bluetooth: HCI socket layer initialized
[17179806.856000] Bluetooth: L2CAP ver 2.8
[17179806.856000] Bluetooth: L2CAP socket layer initialized
[17179806.900000] Bluetooth: RFCOMM socket layer initialized
[17179806.900000] Bluetooth: RFCOMM TTY layer initialized
[17179806.900000] Bluetooth: RFCOMM ver 1.7
[17179814.924000] ath0: no IPv6 routers present
为了减少电脑的重启，我用别人的电脑上网，这是为了复制信息我插上u盘后的输出：

代码： 全选

插U盘后的
dmesg
[17179569.184000] Linux version 2.6.17-11-generic (root@terranova) (gcc version 4.1.2 20060928 (prerelease) (Ubuntu 4.1.1-13ubuntu5)) #2 SMP Thu Feb 1 19:52:28 UTC 2007 (Ubuntu 2.6.17-11.35-generic)
[17179569.184000] BIOS-provided physical RAM map:
[17179569.184000]  BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[17179569.184000]  BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[17179569.184000]  BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)
[17179569.184000]  BIOS-e820: 0000000000100000 - 000000001ffb0000 (usable)
[17179569.184000]  BIOS-e820: 000000001ffb0000 - 000000001ffc0000 (ACPI data)
[17179569.184000]  BIOS-e820: 000000001ffc0000 - 000000001fff0000 (ACPI NVS)
[17179569.184000]  BIOS-e820: 000000001fff0000 - 0000000020000000 (reserved)
[17179569.184000]  BIOS-e820: 00000000ff780000 - 0000000100000000 (reserved)
[17179569.184000] 0MB HIGHMEM available.
[17179569.184000] 511MB LOWMEM available.
[17179569.184000] found SMP MP-table at 000ff780
[17179569.184000] On node 0 totalpages: 130992
[17179569.184000]   DMA zone: 4096 pages, LIFO batch:0
[17179569.184000]   Normal zone: 126896 pages, LIFO batch:31
[17179569.184000] DMI 2.3 present.
[17179569.184000] ACPI: RSDP (v000 ACPIAM                                ) @ 0x000fab00
[17179569.184000] ACPI: RSDT (v001 A M I  OEMRSDT  0x07000515 MSFT 0x00000097) @ 0x1ffb0000
[17179569.184000] ACPI: FADT (v001 A M I  OEMFACP  0x07000515 MSFT 0x00000097) @ 0x1ffb0200
[17179569.184000] ACPI: MADT (v001 A M I  OEMAPIC  0x07000515 MSFT 0x00000097) @ 0x1ffb0390
[17179569.184000] ACPI: OEMB (v001 A M I  OEMBIOS  0x07000515 MSFT 0x00000097) @ 0x1ffc0040
[17179569.184000] ACPI: DSDT (v001  A0232 A0232008 0x00000008 MSFT 0x0100000d) @ 0x00000000
[17179569.184000] ACPI: PM-Timer IO Port: 0x808
[17179569.184000] ACPI: Local APIC address 0xfee00000
[17179569.184000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[17179569.184000] Processor #0 15:12 APIC version 16
[17179569.184000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[17179569.184000] IOAPIC[0]: apic_id 1, version 3, address 0xfec00000, GSI 0-23
[17179569.184000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[17179569.184000] ACPI: IRQ0 used by override.
[17179569.184000] ACPI: IRQ2 used by override.
[17179569.184000] ACPI: IRQ9 used by override.
[17179569.184000] Enabling APIC mode:  Flat.  Using 1 I/O APICs
[17179569.184000] Using ACPI (MADT) for SMP configuration information
[17179569.184000] Allocating PCI resources starting at 30000000 (gap: 20000000:df780000)
[17179569.184000] Built 1 zonelists
[17179569.184000] Kernel command line: root=/dev/hda8 ro quiet splash locale=zh_CN
[17179569.184000] mapped APIC to ffffd000 (fee00000)
[17179569.184000] mapped IOAPIC to ffffc000 (fec00000)
[17179569.184000] Enabling fast FPU save and restore... done.
[17179569.184000] Enabling unmasked SIMD FPU exception support... done.
[17179569.184000] Initializing CPU#0
[17179569.184000] PID hash table entries: 2048 (order: 11, 8192 bytes)
[17179569.184000] Detected 1602.440 MHz processor.
[17179569.184000] Using pmtmr for high-res timesource
[17179569.184000] Console: colour VGA+ 80x25
[17179570.068000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[17179570.068000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[17179570.080000] Memory: 509536k/523968k available (1911k kernel code, 13912k reserved, 1073k data, 308k init, 0k highmem)
[17179570.080000] Checking if this processor honours the WP bit even in supervisor mode... Ok.
[17179570.160000] Calibrating delay using timer specific routine.. 3208.72 BogoMIPS (lpj=6417450)
[17179570.160000] Security Framework v1.0.0 initialized
[17179570.160000] SELinux:  Disabled at boot.
[17179570.160000] Mount-cache hash table entries: 512
[17179570.160000] CPU: After generic identify, caps: 078bfbff e3d3fbff 00000000 00000000 00000001 00000000 00000001
[17179570.160000] CPU: After vendor identify, caps: 078bfbff e3d3fbff 00000000 00000000 00000001 00000000 00000001
[17179570.160000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[17179570.160000] CPU: L2 Cache: 256K (64 bytes/line)
[17179570.160000] CPU: After all inits, caps: 078bfbff e3d3fbff 00000000 00000410 00000001 00000000 00000001
[17179570.160000] Checking 'hlt' instruction... OK.
[17179570.176000] SMP alternatives: switching to UP code
[17179570.176000] Freeing SMP alternatives: 16k freed
[17179570.176000] checking if image is initramfs... it is
[17179570.756000] Freeing initrd memory: 5624k freed
[17179570.756000] ACPI: Core revision 20060707
[17179570.756000] ACPI: Looking for DSDT ... not found!
[17179570.756000] CPU0: AMD Sempron(tm) Processor 2800+ stepping 02
[17179570.756000] Total of 1 processors activated (3208.72 BogoMIPS).
[17179570.756000] ENABLING IO-APIC IRQs
[17179570.760000] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=0 pin2=0
[17179570.900000] Brought up 1 CPUs
[17179570.900000] migration_cost=0
[17179570.900000] NET: Registered protocol family 16
[17179570.900000] EISA bus registered
[17179570.900000] ACPI: bus type pci registered
[17179570.900000] PCI: PCI BIOS revision 2.10 entry at 0xf0031, last bus=1
[17179570.900000] PCI: Using configuration type 1
[17179570.900000] Setting up standard PCI resources
[17179570.908000] ACPI: Interpreter enabled
[17179570.908000] ACPI: Using IOAPIC for interrupt routing
[17179570.908000] ACPI: PCI Root Bridge [PCI0] (0000:00)
[17179570.908000] PCI: Probing PCI hardware (bus 00)
[17179570.912000] PCI: Ignoring BAR0-3 of IDE controller 0000:00:0f.1
[17179570.912000] PCI: Quirk-MSI-K8T Soundcard On
[17179570.912000] PCI: Unexpected Value in PCI-Register: no Change!
[17179570.912000] PCI: enabled onboard AC97/MC97 devices
[17179570.912000] Boot video device is 0000:01:00.0
[17179570.912000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[17179570.928000] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 10 *11 14 15)
[17179570.928000] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 *10 11 14 15)
[17179570.928000] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 7 10 11 14 15)
[17179570.928000] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 10 11 14 15) *0, disabled.
[17179570.928000] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 10 11 14 15) *0, disabled.
[17179570.928000] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 10 11 14 15) *0, disabled.
[17179570.928000] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 10 11 14 15) *0, disabled.
[17179570.928000] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 10 11 14 15) *0, disabled.
[17179570.928000] Linux Plug and Play Support v0.97 (c) Adam Belay
[17179570.928000] pnp: PnP ACPI init
[17179570.932000] pnp: PnP ACPI: found 14 devices
[17179570.932000] PnPBIOS: Disabled by ACPI PNP
[17179570.932000] PCI: Using ACPI for IRQ routing
[17179570.932000] PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
[17179570.936000] pnp: 00:09: ioport range 0x290-0x297 has been reserved
[17179570.936000] PCI: Bridge: 0000:00:01.0
[17179570.936000]   IO window: disabled.
[17179570.936000]   MEM window: faf00000-fbffffff
[17179570.936000]   PREFETCH window: f0000000-f9ffffff
[17179570.936000] PCI: Setting latency timer of device 0000:00:01.0 to 64
[17179570.936000] NET: Registered protocol family 2
[17179570.976000] IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
[17179570.976000] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
[17179570.976000] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[17179570.976000] TCP: Hash tables configured (established 16384 bind 8192)
[17179570.976000] TCP reno registered
[17179570.976000] audit: initializing netlink socket (disabled)
[17179570.976000] audit(1174567772.976:1): initialized
[17179570.976000] VFS: Disk quotas dquot_6.5.1
[17179570.976000] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[17179570.976000] Initializing Cryptographic API
[17179570.976000] io scheduler noop registered
[17179570.976000] io scheduler anticipatory registered
[17179570.976000] io scheduler deadline registered
[17179570.976000] io scheduler cfq registered (default)
[17179570.976000] isapnp: Scanning for PnP cards...
[17179571.328000] isapnp: No Plug & Play device found
[17179571.352000] Real Time Clock Driver v1.12ac
[17179571.352000] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[17179571.352000] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[17179571.352000] 00:0c: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[17179571.356000] mice: PS/2 mouse device common for all mice
[17179571.356000] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[17179571.356000] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
[17179571.356000] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
[17179571.356000] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
[17179571.356000] serio: i8042 AUX port at 0x60,0x64 irq 12
[17179571.356000] serio: i8042 KBD port at 0x60,0x64 irq 1
[17179571.356000] EISA: Probing bus 0 at eisa.0
[17179571.356000] Cannot allocate resource for EISA slot 1
[17179571.356000] EISA: Detected 0 cards.
[17179571.356000] TCP bic registered
[17179571.356000] NET: Registered protocol family 1
[17179571.356000] NET: Registered protocol family 8
[17179571.356000] NET: Registered protocol family 20
[17179571.356000] Using IPI No-Shortcut mode
[17179571.356000] ACPI: (supports S0 S1 S3 S4 S5)
[17179571.356000] Freeing unused kernel memory: 308k freed
[17179571.380000] input: AT Translated Set 2 keyboard as /class/input/input0
[17179572.492000] Capability LSM initialized
[17179572.996000] SCSI subsystem initialized
[17179573.000000] libata version 1.20 loaded.
[17179573.004000] sata_via 0000:00:0f.0: version 1.1
[17179573.004000] ACPI: PCI Interrupt 0000:00:0f.0[B] -> GSI 20 (level, low) -> IRQ 169
[17179573.004000] PCI: Via IRQ fixup for 0000:00:0f.0, from 10 to 9
[17179573.004000] sata_via 0000:00:0f.0: routed to hard irq line 9
[17179573.004000] ata1: SATA max UDMA/133 cmd 0xE800 ctl 0xE402 bmdma 0xD400 irq 169
[17179573.004000] ata2: SATA max UDMA/133 cmd 0xE000 ctl 0xD802 bmdma 0xD408 irq 169
[17179573.172000] scsi0 : sata_via
[17179573.340000] scsi1 : sata_via
[17179573.372000] VP_IDE: IDE controller at PCI slot 0000:00:0f.1
[17179573.372000] ACPI: PCI Interrupt 0000:00:0f.1[A] -> GSI 20 (level, low) -> IRQ 169
[17179573.372000] PCI: Via IRQ fixup for 0000:00:0f.1, from 255 to 9
[17179573.372000] VP_IDE: chipset revision 6
[17179573.372000] VP_IDE: not 100% native mode: will probe irqs later
[17179573.372000] VP_IDE: VIA vt8237 (rev 00) IDE UDMA133 controller on pci0000:00:0f.1
[17179573.372000]     ide0: BM-DMA at 0xfc00-0xfc07, BIOS settings: hda:DMA, hdb:pio
[17179573.372000]     ide1: BM-DMA at 0xfc08-0xfc0f, BIOS settings: hdc:pio, hdd:DMA
[17179573.372000] Probing IDE interface ide0...
[17179573.796000] hda: ST340810A, ATA DISK drive
[17179574.476000] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
[17179574.476000] Probing IDE interface ide1...
[17179575.620000] hdd: PIONEER DVD-ROM DVD-122P, ATAPI CD/DVD-ROM drive
[17179575.680000] ide1 at 0x170-0x177,0x376 on irq 15
[17179575.692000] hda: max request size: 128KiB
[17179575.692000] hdd: ATAPI 40X DVD-ROM drive, 512kB Cache
[17179575.692000] Uniform CD-ROM driver Revision: 3.20
[17179575.692000] hda: 78165360 sectors (40020 MB) w/2048KiB Cache, CHS=65535/16/63, UDMA(100)
[17179575.692000] hda: cache flushes not supported
[17179575.692000]  hda: hda1 hda2 < hda5 hda6 hda7 hda8 hda9 hda10 hda11 >
[17179579.864000] usbcore: registered new driver usbfs
[17179579.864000] usbcore: registered new driver hub
[17179579.868000] USB Universal Host Controller Interface driver v3.0
[17179579.868000] ACPI: PCI Interrupt 0000:00:10.0[A] -> GSI 21 (level, low) -> IRQ 177
[17179579.868000] PCI: Via IRQ fixup for 0000:00:10.0, from 11 to 1
[17179579.868000] uhci_hcd 0000:00:10.0: UHCI Host Controller
[17179579.868000] uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 1
[17179579.868000] uhci_hcd 0000:00:10.0: irq 177, io base 0x0000b800
[17179579.872000] usb usb1: configuration #1 chosen from 1 choice
[17179579.872000] hub 1-0:1.0: USB hub found
[17179579.872000] hub 1-0:1.0: 2 ports detected
[17179579.976000] ACPI: PCI Interrupt 0000:00:10.1[A] -> GSI 21 (level, low) -> IRQ 177
[17179579.976000] PCI: Via IRQ fixup for 0000:00:10.1, from 11 to 1
[17179579.976000] uhci_hcd 0000:00:10.1: UHCI Host Controller
[17179579.980000] uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 2
[17179579.980000] uhci_hcd 0000:00:10.1: irq 177, io base 0x0000c000
[17179579.980000] usb usb2: configuration #1 chosen from 1 choice
[17179579.980000] hub 2-0:1.0: USB hub found
[17179579.980000] hub 2-0:1.0: 2 ports detected
[17179580.084000] ACPI: PCI Interrupt 0000:00:10.2[B] -> GSI 21 (level, low) -> IRQ 177
[17179580.084000] PCI: Via IRQ fixup for 0000:00:10.2, from 10 to 1
[17179580.084000] uhci_hcd 0000:00:10.2: UHCI Host Controller
[17179580.084000] uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 3
[17179580.084000] uhci_hcd 0000:00:10.2: irq 177, io base 0x0000c400
[17179580.084000] usb usb3: configuration #1 chosen from 1 choice
[17179580.088000] hub 3-0:1.0: USB hub found
[17179580.088000] hub 3-0:1.0: 2 ports detected
[17179580.192000] ACPI: PCI Interrupt 0000:00:10.3[B] -> GSI 21 (level, low) -> IRQ 177
[17179580.192000] PCI: Via IRQ fixup for 0000:00:10.3, from 10 to 1
[17179580.192000] uhci_hcd 0000:00:10.3: UHCI Host Controller
[17179580.192000] uhci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 4
[17179580.192000] uhci_hcd 0000:00:10.3: irq 177, io base 0x0000c800
[17179580.192000] usb usb4: configuration #1 chosen from 1 choice
[17179580.196000] hub 4-0:1.0: USB hub found
[17179580.196000] hub 4-0:1.0: 2 ports detected
[17179580.304000] ACPI: PCI Interrupt 0000:00:10.4[C] -> GSI 21 (level, low) -> IRQ 177
[17179580.304000] PCI: Via IRQ fixup for 0000:00:10.4, from 5 to 1
[17179580.304000] ehci_hcd 0000:00:10.4: EHCI Host Controller
[17179580.304000] ehci_hcd 0000:00:10.4: new USB bus registered, assigned bus number 5
[17179580.304000] ehci_hcd 0000:00:10.4: irq 177, io mem 0xfac00000
[17179580.304000] ehci_hcd 0000:00:10.4: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[17179580.304000] usb usb5: configuration #1 chosen from 1 choice
[17179580.304000] hub 5-0:1.0: USB hub found
[17179580.304000] hub 5-0:1.0: 8 ports detected
[17179580.480000] Attempting manual resume
[17179580.528000] kjournald starting.  Commit interval 5 seconds
[17179580.528000] EXT3-fs: mounted filesystem with ordered data mode.
[17179594.516000] ath_hal: module license 'Proprietary' taints kernel.
[17179594.516000] ath_hal: 0.9.17.2 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413)
[17179594.728000] wlan: 0.8.4.2 (0.9.2.1)
[17179594.904000] ath_rate_sample: 1.2 (0.9.2.1)
[17179596.160000] input: PC Speaker as /class/input/input1
[17179596.828000] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[17179597.400000] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[17179598.396000] Floppy drive(s): fd0 is 1.44M
[17179598.424000] FDC 0 is a post-1991 82077
[17179598.944000] parport: PnPBIOS parport detected.
[17179598.944000] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,EPP,ECP,DMA]
[17179599.496000] ath_pci: 0.9.4.5 (0.9.2.1)
[17179599.496000] ACPI: PCI Interrupt 0000:00:0b.0[A] -> GSI 16 (level, low) -> IRQ 185
[17179600.092000] via-rhine.c:v1.10-LK1.2.0-2.6 June-10-2004 Written by Donald Becker
[17179600.100000] wifi0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps
[17179600.100000] wifi0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
[17179600.100000] wifi0: H/W encryption support: WEP AES AES_CCM TKIP
[17179600.100000] wifi0: mac 7.8 phy 4.5 radio 5.6
[17179600.100000] wifi0: Use hw queue 1 for WME_AC_BE traffic
[17179600.100000] wifi0: Use hw queue 0 for WME_AC_BK traffic
[17179600.100000] wifi0: Use hw queue 2 for WME_AC_VI traffic
[17179600.100000] wifi0: Use hw queue 3 for WME_AC_VO traffic
[17179600.100000] wifi0: Use hw queue 8 for CAB traffic
[17179600.100000] wifi0: Use hw queue 9 for beacons
[17179600.296000] Linux agpgart interface v0.101 (c) Dave Jones
[17179600.424000] wifi0: Atheros 5212: mem=0xfae00000, irq=185
[17179600.424000] ACPI: PCI Interrupt 0000:00:12.0[A] -> GSI 23 (level, low) -> IRQ 193
[17179600.424000] PCI: Via IRQ fixup for 0000:00:12.0, from 11 to 1
[17179600.424000] eth0: VIA Rhine II at 0x1b000, 00:15:f2:14:27:7a, IRQ 193.
[17179600.424000] eth0: MII PHY found at address 1, status 0x7849 advertising 01e1 Link 0000.
[17179600.424000] agpgart: Detected AGP bridge 0
[17179600.424000] agpgart: AGP aperture is 32M @ 0xec000000
[17179600.676000] PCI: Enabling device 0000:00:11.6 (0000 -> 0001)
[17179600.676000] ACPI: PCI Interrupt 0000:00:11.6[C] -> GSI 22 (level, low) -> IRQ 201
[17179600.676000] PCI: Via IRQ fixup for 0000:00:11.6, from 0 to 9
[17179601.100000] input: ImPS/2 Generic Wheel Mouse as /class/input/input2
[17179601.120000] ts: Compaq touchscreen protocol output
[17179601.432000] PCI: Setting latency timer of device 0000:00:11.6 to 64
[17179601.936000] ACPI: PCI interrupt for device 0000:00:11.6 disabled
[17179601.936000] VIA 82xx Modem: probe of 0000:00:11.6 failed with error -13
[17179601.936000] ACPI: PCI Interrupt 0000:00:11.5[C] -> GSI 22 (level, low) -> IRQ 201
[17179601.936000] PCI: Via IRQ fixup for 0000:00:11.5, from 5 to 9
[17179601.936000] PCI: Setting latency timer of device 0000:00:11.5 to 64
[17179602.452000] codec_read: codec 0 is not valid [0xfe0000]
[17179602.460000] codec_read: codec 0 is not valid [0xfe0000]
[17179602.464000] codec_read: codec 0 is not valid [0xfe0000]
[17179602.472000] codec_read: codec 0 is not valid [0xfe0000]
[17179773.876000] lp0: using parport0 (interrupt-driven).
[17179773.912000] Adding 297160k swap on /dev/disk/by-uuid/e71cdebe-3d25-41c9-ba60-11f8deebabcc.  Priority:-1 extents:1 across:297160k
[17179773.964000] EXT3 FS on hda8, internal journal
[17179774.152000] NTFS driver 2.1.27 [Flags: R/O MODULE].
[17179774.152000] NTFS-fs warning (device hda1): parse_options(): Option iocharset is deprecated. Please use option nls=<charsetname> in the future.
[17179774.232000] NTFS volume version 3.1.
[17179774.300000] FAT: utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
[17179774.388000] FAT: utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
[17179774.424000] FAT: utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
[17179774.460000] FAT: utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
[17179774.536000] FAT: utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
[17179774.808000] ndiswrapper version 1.38 loaded (preempt=no,smp=yes)
[17179774.916000] usbcore: registered new driver ndiswrapper
[17179776.004000] NET: Registered protocol family 17
[17179776.976000] ACPI: Power Button (FF) [PWRF]
[17179776.976000] ACPI: Power Button (CM) [PWRB]
[17179776.976000] ACPI: Sleep Button (CM) [SLPB]
[17179777.092000] ibm_acpi: ec object not found
[17179777.120000] pcc_acpi: loading...
[17179777.460000] powernow-k8: Power state transitions not supported
[17179779.416000] apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
[17179779.416000] apm: overridden by ACPI.
[17179804.676000] NET: Registered protocol family 10
[17179804.676000] lo: Disabled Privacy Extensions
[17179804.676000] IPv6 over IPv4 tunneling driver
[17179804.740000] eth0: link down
[17179804.740000] ADDRCONF(NETDEV_UP): eth0: link is not ready
[17179806.568000] Bluetooth: Core ver 2.8
[17179806.568000] NET: Registered protocol family 31
[17179806.568000] Bluetooth: HCI device and connection manager initialized
[17179806.568000] Bluetooth: HCI socket layer initialized
[17179806.856000] Bluetooth: L2CAP ver 2.8
[17179806.856000] Bluetooth: L2CAP socket layer initialized
[17179806.900000] Bluetooth: RFCOMM socket layer initialized
[17179806.900000] Bluetooth: RFCOMM TTY layer initialized
[17179806.900000] Bluetooth: RFCOMM ver 1.7
[17179814.924000] ath0: no IPv6 routers present
[17179890.544000] usb 1-2: new full speed USB device using uhci_hcd and address 2
[17179890.700000] usb 1-2: configuration #1 chosen from 1 choice
[17179890.828000] usbcore: registered new driver libusual
[17179890.880000] Initializing USB Mass Storage driver...
[17179890.880000] scsi2 : SCSI emulation for USB Mass Storage devices
[17179890.880000] usb-storage: device found at 2
[17179890.880000] usb-storage: waiting for device to settle before scanning
[17179890.880000] usbcore: registered new driver usb-storage
[17179890.880000] USB Mass Storage support registered.
[17179895.880000] usb-storage: device scan complete
[17179895.888000]   Vendor:           Model: SAGE DISK X32M    Rev:     
[17179895.888000]   Type:   Direct-Access                      ANSI SCSI revision: 02
[17179896.076000] SCSI device sda: 64000 512-byte hdwr sectors (33 MB)
[17179896.076000] sda: Write Protect is off
[17179896.076000] sda: Mode Sense: 0b 00 00 08
[17179896.076000] sda: assuming drive cache: write through
[17179896.088000] SCSI device sda: 64000 512-byte hdwr sectors (33 MB)
[17179896.092000] sda: Write Protect is off
[17179896.092000] sda: Mode Sense: 0b 00 00 08
[17179896.092000] sda: assuming drive cache: write through
[17179896.096000]  sda: sda1
[17179896.108000] sd 2:0:0:0: Attached scsi removable disk sda
[17179896.120000] sd 2:0:0:0: Attached scsi generic sg0 type 0
[17179897.124000] FAT: utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
页首
01ago
帖子： 100
注册时间： 2006-10-27 17:06

#22

帖子 由 01ago » 2007-03-22 15:27

lz试过最新的7.04 herd5没有？
我是在7.04 herd3碰到的问题
正怀疑新版本有没有解决
页首
crossa
帖子： 42
注册时间： 2006-09-16 18:10

#23

帖子 由 crossa » 2007-04-05 16:27

瞄过了， :(
TP-LINK的无线网卡配合ndiswrapper确实挑路由器的

貌似和路由器的固件有关系

我也碰到过着样的问题，如果network-admin和wlassistant都连接不了，貌似就只能换网卡了
页首
回复

回到 “系统安装和升级”