[已解决]升级gnome3.6 全面转移到systemd之后默认X启动不了

其他Linux/Unix/BSD/OSX等发行版讨论
头像
shenhao0129
帖子: 192
注册时间: 2007-11-23 12:31

Re: 升级gnome3.6 全面转移到systemd之后默认X启动不了

#16

帖子 shenhao0129 » 2012-11-13 20:20

枫叶饭团 写了:systemctl status gdm
那个我看了,我是没觉得有问题,都正常运行的,明天贴出结果出来
头像
shenhao0129
帖子: 192
注册时间: 2007-11-23 12:31

Re: 升级gnome3.6 全面转移到systemd之后默认X启动不了

#17

帖子 shenhao0129 » 2012-11-15 9:44

枫叶饭团 写了:systemctl status gdm

代码: 全选

gdm.service - GNOME Display Manager
	  Loaded: loaded (/usr/lib/systemd/system/gdm.service; disabled)
	  Active: active (running) since Thu, 2012-11-15 09:43:05 CST; 25s ago
	Main PID: 1535 (gdm-binary)
	  CGroup: name=systemd:/system/gdm.service
		  └ 1535 /usr/sbin/gdm-binary

Nov 15 09:43:05 shenhao gdm-binary[1535]: WARNING: GdmDisplay: display lasted 0.039675 seconds
Nov 15 09:43:05 shenhao gdm-binary[1535]: WARNING: GdmDisplay: display lasted 0.043040 seconds
Nov 15 09:43:05 shenhao gdm-binary[1535]: WARNING: GdmDisplay: display lasted 0.036466 seconds
Nov 15 09:43:05 shenhao gdm-binary[1535]: WARNING: GdmLocalDisplayFactory: maximum number of X display failures reached: check X s... errors
Nov 15 09:43:05 shenhao gdm-binary[1535]: WARNING: GdmDisplay: display lasted 0.037555 seconds
Nov 15 09:43:05 shenhao gdm[1535]: gdm-binary[1535]: WARNING: GdmDisplay: display lasted 0.039675 seconds
Nov 15 09:43:05 shenhao gdm[1535]: gdm-binary[1535]: WARNING: GdmDisplay: display lasted 0.043040 seconds
Nov 15 09:43:05 shenhao gdm[1535]: gdm-binary[1535]: WARNING: GdmDisplay: display lasted 0.036466 seconds
Nov 15 09:43:05 shenhao gdm[1535]: gdm-binary[1535]: WARNING: GdmLocalDisplayFactory: maximum number of X display failures reache...r errors
Nov 15 09:43:05 shenhao gdm[1535]: gdm-binary[1535]: WARNING: GdmDisplay: display lasted 0.037555 seconds
这厮活的好好的
头像
shenhao0129
帖子: 192
注册时间: 2007-11-23 12:31

Re: 升级gnome3.6 全面转移到systemd之后默认X启动不了

#18

帖子 shenhao0129 » 2012-11-15 9:47

状态中显示disable是由于我在折腾了N久之后搞不定禁用了的缘故,除此之外,自动启动的效果跟这个一样
头像
ttand
帖子: 1745
注册时间: 2005-08-22 14:05
来自: 离开北京

Re: 升级gnome3.6 全面转移到systemd之后默认X启动不了

#19

帖子 ttand » 2012-11-15 11:19

shenhao0129 写了:
枫叶饭团 写了:systemctl status gdm

代码: 全选

gdm.service - GNOME Display Manager
	  Loaded: loaded (/usr/lib/systemd/system/gdm.service; disabled)
	  Active: active (running) since Thu, 2012-11-15 09:43:05 CST; 25s ago
	Main PID: 1535 (gdm-binary)
	  CGroup: name=systemd:/system/gdm.service
		  └ 1535 /usr/sbin/gdm-binary

Nov 15 09:43:05 shenhao gdm-binary[1535]: WARNING: GdmDisplay: display lasted 0.039675 seconds
Nov 15 09:43:05 shenhao gdm-binary[1535]: WARNING: GdmDisplay: display lasted 0.043040 seconds
Nov 15 09:43:05 shenhao gdm-binary[1535]: WARNING: GdmDisplay: display lasted 0.036466 seconds
Nov 15 09:43:05 shenhao gdm-binary[1535]: WARNING: GdmLocalDisplayFactory: maximum number of X display failures reached: check X s... errors
Nov 15 09:43:05 shenhao gdm-binary[1535]: WARNING: GdmDisplay: display lasted 0.037555 seconds
Nov 15 09:43:05 shenhao gdm[1535]: gdm-binary[1535]: WARNING: GdmDisplay: display lasted 0.039675 seconds
Nov 15 09:43:05 shenhao gdm[1535]: gdm-binary[1535]: WARNING: GdmDisplay: display lasted 0.043040 seconds
Nov 15 09:43:05 shenhao gdm[1535]: gdm-binary[1535]: WARNING: GdmDisplay: display lasted 0.036466 seconds
Nov 15 09:43:05 shenhao gdm[1535]: gdm-binary[1535]: WARNING: GdmLocalDisplayFactory: maximum number of X display failures reache...r errors
Nov 15 09:43:05 shenhao gdm[1535]: gdm-binary[1535]: WARNING: GdmDisplay: display lasted 0.037555 seconds
这厮活的好好的
这是disable后start的情况么
错过好多好贴,没占到广告位后悔啊
头像
shenhao0129
帖子: 192
注册时间: 2007-11-23 12:31

Re: 升级gnome3.6 全面转移到systemd之后默认X启动不了

#20

帖子 shenhao0129 » 2012-11-15 12:13

ttand 写了:
shenhao0129 写了:
枫叶饭团 写了:systemctl status gdm

代码: 全选

gdm.service - GNOME Display Manager
	  Loaded: loaded (/usr/lib/systemd/system/gdm.service; disabled)
	  Active: active (running) since Thu, 2012-11-15 09:43:05 CST; 25s ago
	Main PID: 1535 (gdm-binary)
	  CGroup: name=systemd:/system/gdm.service
		  └ 1535 /usr/sbin/gdm-binary

Nov 15 09:43:05 shenhao gdm-binary[1535]: WARNING: GdmDisplay: display lasted 0.039675 seconds
Nov 15 09:43:05 shenhao gdm-binary[1535]: WARNING: GdmDisplay: display lasted 0.043040 seconds
Nov 15 09:43:05 shenhao gdm-binary[1535]: WARNING: GdmDisplay: display lasted 0.036466 seconds
Nov 15 09:43:05 shenhao gdm-binary[1535]: WARNING: GdmLocalDisplayFactory: maximum number of X display failures reached: check X s... errors
Nov 15 09:43:05 shenhao gdm-binary[1535]: WARNING: GdmDisplay: display lasted 0.037555 seconds
Nov 15 09:43:05 shenhao gdm[1535]: gdm-binary[1535]: WARNING: GdmDisplay: display lasted 0.039675 seconds
Nov 15 09:43:05 shenhao gdm[1535]: gdm-binary[1535]: WARNING: GdmDisplay: display lasted 0.043040 seconds
Nov 15 09:43:05 shenhao gdm[1535]: gdm-binary[1535]: WARNING: GdmDisplay: display lasted 0.036466 seconds
Nov 15 09:43:05 shenhao gdm[1535]: gdm-binary[1535]: WARNING: GdmLocalDisplayFactory: maximum number of X display failures reache...r errors
Nov 15 09:43:05 shenhao gdm[1535]: gdm-binary[1535]: WARNING: GdmDisplay: display lasted 0.037555 seconds
这厮活的好好的
这是disable后start的情况么
恩,正是,disable之后手动启动的!
头像
shenhao0129
帖子: 192
注册时间: 2007-11-23 12:31

Re: 升级gnome3.6 全面转移到systemd之后默认X启动不了

#21

帖子 shenhao0129 » 2012-11-21 11:26

reached target graphical interface
终端的最后一句话就是这个,启动到这一步之后就一直停止在这,有个光标再闪,没有出现GDM的登录界面
夜色温柔
帖子: 2929
注册时间: 2012-03-24 0:22
系统: archlinux

Re: 升级gnome3.6 全面转移到systemd之后默认X启动不了

#22

帖子 夜色温柔 » 2012-11-21 17:38

我也迁到了systemd,开机关机没有任何报错,除了networkmanager有点问题,其它还好。
GDM,我是通过sudo gdm手动启动的。
头像
shenhao0129
帖子: 192
注册时间: 2007-11-23 12:31

Re: 升级gnome3.6 全面转移到systemd之后默认X启动不了

#23

帖子 shenhao0129 » 2012-11-22 21:06

夜色温柔 写了:我也迁到了systemd,开机关机没有任何报错,除了networkmanager有点问题,其它还好。
GDM,我是通过sudo gdm手动启动的。
我也尝试过gdm和sudo gdm,都不行,完全不行,我都怀疑是不是我的catalyst的驱动问题,可是一想,startx启动的好好的,啥问题都没有,实在是找不到问题在那了
夜色温柔
帖子: 2929
注册时间: 2012-03-24 0:22
系统: archlinux

Re: 升级gnome3.6 全面转移到systemd之后默认X启动不了

#24

帖子 夜色温柔 » 2012-11-22 23:37

有时候卸载重装一下,再运行systemd的相关命令可能就成了。
我把gdm设置为自动启动了,一切正常,貌似systemd就是做了个链接什么的。
头像
shenhao0129
帖子: 192
注册时间: 2007-11-23 12:31

Re: 升级gnome3.6 全面转移到systemd之后默认X启动不了

#25

帖子 shenhao0129 » 2012-11-23 10:01

夜色温柔 写了:有时候卸载重装一下,再运行systemd的相关命令可能就成了。
我把gdm设置为自动启动了,一切正常,貌似systemd就是做了个链接什么的。
恩,这个操作我也弄过了,当时整个yaourt -Rncs gnome ,然后重装了GNOME,还是不行
delectate
帖子: 18311
注册时间: 2008-01-09 22:41

Re: 升级gnome3.6 全面转移到systemd之后默认X启动不了

#26

帖子 delectate » 2012-11-24 11:04

shenhao0129 写了:
夜色温柔 写了:有时候卸载重装一下,再运行systemd的相关命令可能就成了。
我把gdm设置为自动启动了,一切正常,貌似systemd就是做了个链接什么的。
恩,这个操作我也弄过了,当时整个yaourt -Rncs gnome ,然后重装了GNOME,还是不行
this happened to me either.

try roll back accountsservice pkg.

paste your errlog:

代码: 全选

journalctl| grep gdm
头像
shenhao0129
帖子: 192
注册时间: 2007-11-23 12:31

Re: 升级gnome3.6 全面转移到systemd之后默认X启动不了

#27

帖子 shenhao0129 » 2012-11-24 21:24

delectate 写了:
shenhao0129 写了:
夜色温柔 写了:有时候卸载重装一下,再运行systemd的相关命令可能就成了。
我把gdm设置为自动启动了,一切正常,貌似systemd就是做了个链接什么的。
恩,这个操作我也弄过了,当时整个yaourt -Rncs gnome ,然后重装了GNOME,还是不行
this happened to me either.

try roll back accountsservice pkg.

paste your errlog:

代码: 全选

journalctl| grep gdm

代码: 全选

名称   : accountsservice
版本   : 0.6.25-1
URL地址 : http://cgit.freedesktop.org/accountsservice/
软件许可 : GPL3
软件组  : 无
提供   : 无
依赖于  : glib2  polkit  libsystemd
可选依赖 : 无
要求被  : gdm  gnome-control-center
冲突与  : 无
取代   : 无
安装后大小:712.00 KiB
打包者  : Jan Alexander Steffens (heftig) <jan.steffens@gmail.com>
架构   : i686
编译日期 : 2012年09月28日 星期五 23时16分48秒
安装日期 : 2012年11月24日 星期六 20时38分44秒
安装原因 : 作为其他软件包的依赖关系安装
安装脚本 : 否
描述   : D-Bus interface for user account query and manipulation

代码: 全选

[test@test ~]$ journalctl -b |grep gdm
Nov 24 21:07:28 test dbus[352]: [system] Rejected send message, 1 matched rules; type="method_call", sender=":1.2" (uid=0 pid=355 comm="/usr/sbin/gdm-binary ") interface="org.freedesktop.DBus.Properties" member="GetAll" error name="(unset)" requested_reply="0" destination=":1.4" (uid=0 pid=366 comm="/usr/lib/gdm/gdm-simple-slave --display-id /org/gn")
Nov 24 21:07:29 test gdm-simple-slave[366]: WARNING: Child process 370 was already dead.
Nov 24 21:07:29 test gdm-simple-slave[366]: GLib-GObject-CRITICAL: g_object_ref: assertion `object->ref_count > 0' failed
Nov 24 21:07:29 test gdm-simple-slave[366]: GLib-GObject-CRITICAL: g_object_unref: assertion `object->ref_count > 0' failed
Nov 24 21:07:29 test gdm-binary[355]: WARNING: GdmDisplay: display lasted 2.852579 seconds
Nov 24 21:07:29 test gdm-binary[355]: WARNING: GdmDisplay: display lasted 2.947347 seconds
Nov 24 21:07:29 test dbus[352]: [system] Rejected send message, 1 matched rules; type="method_call", sender=":1.2" (uid=0 pid=355 comm="/usr/sbin/gdm-binary ") interface="org.freedesktop.DBus.Properties" member="GetAll" error name="(unset)" requested_reply="0" destination=":1.6" (uid=0 pid=374 comm="/usr/lib/gdm/gdm-simple-slave --display-id /org/gn")
Nov 24 21:07:45 test gdm-simple-slave[374]: WARNING: Child process 377 was already dead.
Nov 24 21:07:46 test gdm-simple-slave[374]: GLib-GObject-CRITICAL: g_object_ref: assertion `object->ref_count > 0' failed
Nov 24 21:07:46 test gdm-simple-slave[374]: GLib-GObject-CRITICAL: g_object_unref: assertion `object->ref_count > 0' failed
Nov 24 21:07:46 test gdm-binary[355]: WARNING: GdmDisplay: display lasted 0.001127 seconds
Nov 24 21:07:46 test dbus[352]: [system] Rejected send message, 1 matched rules; type="method_call", sender=":1.2" (uid=0 pid=355 comm="/usr/sbin/gdm-binary ") interface="org.freedesktop.DBus.Properties" member="GetAll" error name="(unset)" requested_reply="0" destination=":1.8" (uid=0 pid=395 comm="/usr/lib/gdm/gdm-simple-slave --display-id /org/gn")
Nov 24 21:07:46 test gdm-simple-slave[395]: WARNING: Child process 397 was already dead.
Nov 24 21:07:46 test gdm-simple-slave[395]: GLib-GObject-CRITICAL: g_object_ref: assertion `object->ref_count > 0' failed
Nov 24 21:07:46 test gdm-simple-slave[395]: GLib-GObject-CRITICAL: g_object_unref: assertion `object->ref_count > 0' failed
Nov 24 21:07:47 test gdm-binary[355]: WARNING: Child process 395 was already dead.
Nov 24 21:07:47 test gdm-binary[355]: WARNING: Unable to kill slave process
Nov 24 21:07:47 test gdm-binary[355]: WARNING: Child process 395 was already dead.
Nov 24 21:07:47 test gdm-binary[355]: WARNING: Unable to kill slave process
Nov 24 21:07:47 test gdm-binary[355]: WARNING: GdmDisplay: display lasted 0.179107 seconds
Nov 24 21:07:47 test dbus[352]: [system] Rejected send message, 1 matched rules; type="method_call", sender=":1.2" (uid=0 pid=355 comm="/usr/sbin/gdm-binary ") interface="org.freedesktop.DBus.Properties" member="GetAll" error name="(unset)" requested_reply="0" destination=":1.9" (uid=0 pid=400 comm="/usr/lib/gdm/gdm-simple-slave --display-id /org/gn")
Nov 24 21:07:47 test gdm-simple-slave[400]: WARNING: Child process 402 was already dead.
Nov 24 21:07:47 test gdm-simple-slave[400]: GLib-GObject-CRITICAL: g_object_ref: assertion `object->ref_count > 0' failed
Nov 24 21:07:47 test gdm-simple-slave[400]: GLib-GObject-CRITICAL: g_object_unref: assertion `object->ref_count > 0' failed
Nov 24 21:07:47 test gdm-binary[355]: WARNING: GdmDisplay: display lasted 0.515252 seconds
Nov 24 21:07:47 test gdm-binary[355]: WARNING: GdmDisplay: display lasted 0.517210 seconds
Nov 24 21:07:47 test dbus[352]: [system] Rejected send message, 1 matched rules; type="method_call", sender=":1.2" (uid=0 pid=355 comm="/usr/sbin/gdm-binary ") interface="org.freedesktop.DBus.Properties" member="GetAll" error name="(unset)" requested_reply="0" destination=":1.10" (uid=0 pid=404 comm="/usr/lib/gdm/gdm-simple-slave --display-id /org/gn")
Nov 24 21:07:47 test gdm-simple-slave[404]: WARNING: Child process 406 was already dead.
Nov 24 21:07:47 test gdm-simple-slave[404]: GLib-GObject-CRITICAL: g_object_ref: assertion `object->ref_count > 0' failed
Nov 24 21:07:47 test gdm-simple-slave[404]: GLib-GObject-CRITICAL: g_object_unref: assertion `object->ref_count > 0' failed
Nov 24 21:07:47 test gdm-binary[355]: WARNING: GdmDisplay: display lasted 0.034313 seconds
Nov 24 21:07:47 test dbus[352]: [system] Rejected send message, 1 matched rules; type="method_call", sender=":1.2" (uid=0 pid=355 comm="/usr/sbin/gdm-binary ") interface="org.freedesktop.DBus.Properties" member="GetAll" error name="(unset)" requested_reply="0" destination=":1.11" (uid=0 pid=408 comm="/usr/lib/gdm/gdm-simple-slave --display-id /org/gn")
Nov 24 21:07:47 test dbus-daemon[352]: dbus[352]: [system] Rejected send message, 1 matched rules; type="method_call", sender=":1.2" (uid=0 pid=355 comm="/usr/sbin/gdm-binary ") interface="org.freedesktop.DBus.Properties" member="GetAll" error name="(unset)" requested_reply="0" destination=":1.4" (uid=0 pid=366 comm="/usr/lib/gdm/gdm-simple-slave --display-id /org/gn")
Nov 24 21:07:47 test dbus-daemon[352]: dbus[352]: [system] Rejected send message, 1 matched rules; type="method_call", sender=":1.2" (uid=0 pid=355 comm="/usr/sbin/gdm-binary ") interface="org.freedesktop.DBus.Properties" member="GetAll" error name="(unset)" requested_reply="0" destination=":1.6" (uid=0 pid=374 comm="/usr/lib/gdm/gdm-simple-slave --display-id /org/gn")
Nov 24 21:07:47 test dbus-daemon[352]: dbus[352]: [system] Rejected send message, 1 matched rules; type="method_call", sender=":1.2" (uid=0 pid=355 comm="/usr/sbin/gdm-binary ") interface="org.freedesktop.DBus.Properties" member="GetAll" error name="(unset)" requested_reply="0" destination=":1.8" (uid=0 pid=395 comm="/usr/lib/gdm/gdm-simple-slave --display-id /org/gn")
Nov 24 21:07:47 test dbus-daemon[352]: dbus[352]: [system] Rejected send message, 1 matched rules; type="method_call", sender=":1.2" (uid=0 pid=355 comm="/usr/sbin/gdm-binary ") interface="org.freedesktop.DBus.Properties" member="GetAll" error name="(unset)" requested_reply="0" destination=":1.9" (uid=0 pid=400 comm="/usr/lib/gdm/gdm-simple-slave --display-id /org/gn")
Nov 24 21:07:47 test dbus-daemon[352]: dbus[352]: [system] Rejected send message, 1 matched rules; type="method_call", sender=":1.2" (uid=0 pid=355 comm="/usr/sbin/gdm-binary ") interface="org.freedesktop.DBus.Properties" member="GetAll" error name="(unset)" requested_reply="0" destination=":1.10" (uid=0 pid=404 comm="/usr/lib/gdm/gdm-simple-slave --display-id /org/gn")
Nov 24 21:07:48 test dbus-daemon[352]: dbus[352]: [system] Rejected send message, 1 matched rules; type="method_call", sender=":1.2" (uid=0 pid=355 comm="/usr/sbin/gdm-binary ") interface="org.freedesktop.DBus.Properties" member="GetAll" error name="(unset)" requested_reply="0" destination=":1.11" (uid=0 pid=408 comm="/usr/lib/gdm/gdm-simple-slave --display-id /org/gn")
Nov 24 21:07:48 test gdm-simple-slave[408]: WARNING: Child process 410 was already dead.
Nov 24 21:07:48 test gdm-simple-slave[408]: GLib-GObject-CRITICAL: g_object_ref: assertion `object->ref_count > 0' failed
Nov 24 21:07:48 test gdm-simple-slave[408]: GLib-GObject-CRITICAL: g_object_unref: assertion `object->ref_count > 0' failed
Nov 24 21:07:48 test gdm-binary[355]: WARNING: GdmDisplay: display lasted 0.075864 seconds
Nov 24 21:07:48 test gdm-binary[355]: WARNING: GdmLocalDisplayFactory: maximum number of X display failures reached: check X server log for errors
Nov 24 21:07:48 test gdm-binary[355]: WARNING: GdmDisplay: display lasted 0.076069 seconds
Nov 24 21:07:48 test gdm[355]: gdm-binary[355]: WARNING: GdmDisplay: display lasted 2.852579 seconds
Nov 24 21:07:48 test gdm[355]: gdm-binary[355]: WARNING: GdmDisplay: display lasted 2.947347 seconds
Nov 24 21:07:48 test gdm[355]: gdm-binary[355]: WARNING: GdmDisplay: display lasted 0.001127 seconds
Nov 24 21:07:48 test gdm[355]: gdm-binary[355]: WARNING: Child process 395 was already dead.
Nov 24 21:07:48 test gdm[355]: gdm-binary[355]: WARNING: Unable to kill slave process
Nov 24 21:07:48 test gdm[355]: gdm-binary[355]: WARNING: Child process 395 was already dead.
Nov 24 21:07:48 test gdm[355]: gdm-binary[355]: WARNING: Unable to kill slave process
Nov 24 21:07:48 test gdm[355]: gdm-binary[355]: WARNING: GdmDisplay: display lasted 0.179107 seconds
Nov 24 21:07:48 test gdm[355]: gdm-binary[355]: WARNING: GdmDisplay: display lasted 0.515252 seconds
Nov 24 21:07:48 test gdm[355]: gdm-binary[355]: WARNING: GdmDisplay: display lasted 0.517210 seconds
Nov 24 21:07:48 test gdm[355]: gdm-binary[355]: WARNING: GdmDisplay: display lasted 0.034313 seconds
Nov 24 21:07:48 test gdm[355]: gdm-binary[355]: WARNING: GdmDisplay: display lasted 0.075864 seconds
Nov 24 21:07:48 test gdm[355]: gdm-binary[355]: WARNING: GdmLocalDisplayFactory: maximum number of X display failures reached: check X server log for errors
Nov 24 21:07:48 test gdm[355]: gdm-binary[355]: WARNING: GdmDisplay: display lasted 0.076069 seconds

代码: 全选

accounts-daemon.service - Accounts Service
	  Loaded: loaded (/usr/lib/systemd/system/accounts-daemon.service; enabled)
	  Active: active (running) since Sat, 2012-11-24 21:07:46 CST; 19min ago
	Main PID: 353 (accounts-daemon)
	  CGroup: name=systemd:/system/accounts-daemon.service
		  └ 353 /usr/lib/accountsservice/accounts-daemon
上次由 shenhao0129 在 2012-11-24 21:28,总共编辑 1 次。
头像
shenhao0129
帖子: 192
注册时间: 2007-11-23 12:31

Re: 升级gnome3.6 全面转移到systemd之后默认X启动不了

#28

帖子 shenhao0129 » 2012-11-24 21:25

delectate 写了:
shenhao0129 写了:
夜色温柔 写了:有时候卸载重装一下,再运行systemd的相关命令可能就成了。
我把gdm设置为自动启动了,一切正常,貌似systemd就是做了个链接什么的。
恩,这个操作我也弄过了,当时整个yaourt -Rncs gnome ,然后重装了GNOME,还是不行
this happened to me either.

try roll back accountsservice pkg.

paste your errlog:

代码: 全选

journalctl| grep gdm
其实我情况还跟你不一样,我是X都启动不了,根本看不到图形界面,没有到登录界面那,鼠标什么的都看不到
delectate
帖子: 18311
注册时间: 2008-01-09 22:41

Re: 升级gnome3.6 全面转移到systemd之后默认X启动不了

#29

帖子 delectate » 2012-11-25 14:44

shenhao0129 写了:
delectate 写了:
shenhao0129 写了:
夜色温柔 写了:有时候卸载重装一下,再运行systemd的相关命令可能就成了。
我把gdm设置为自动启动了,一切正常,貌似systemd就是做了个链接什么的。
恩,这个操作我也弄过了,当时整个yaourt -Rncs gnome ,然后重装了GNOME,还是不行
this happened to me either.

try roll back accountsservice pkg.

paste your errlog:

代码: 全选

journalctl| grep gdm
其实我情况还跟你不一样,我是X都启动不了,根本看不到图形界面,没有到登录界面那,鼠标什么的都看不到
try this:

代码: 全选

systemctl --failed
and, I want /var/log/Xorg.0.log, /var/log/gdm/:0.log
头像
shenhao0129
帖子: 192
注册时间: 2007-11-23 12:31

Re: 升级gnome3.6 全面转移到systemd之后默认X启动不了

#30

帖子 shenhao0129 » 2012-11-26 16:32

delectate 写了:
shenhao0129 写了:
delectate 写了:
shenhao0129 写了:
夜色温柔 写了:有时候卸载重装一下,再运行systemd的相关命令可能就成了。
我把gdm设置为自动启动了,一切正常,貌似systemd就是做了个链接什么的。
恩,这个操作我也弄过了,当时整个yaourt -Rncs gnome ,然后重装了GNOME,还是不行
this happened to me either.

try roll back accountsservice pkg.

paste your errlog:

代码: 全选

journalctl| grep gdm
其实我情况还跟你不一样,我是X都启动不了,根本看不到图形界面,没有到登录界面那,鼠标什么的都看不到
try this:

代码: 全选

systemctl --failed
and, I want /var/log/Xorg.0.log, /var/log/gdm/:0.log

代码: 全选

[test@test ~]$ sudo systemctl --failed
[sudo] password for test: 
0 loaded units listed. Pass --all to see loaded but inactive units, too.
To show all installed unit files use 'systemctl list-unit-files'

代码: 全选

[   263.186] 
X.Org X Server 1.11.4
Release Date: 2012-01-27
[   263.186] X Protocol Version 11, Revision 0
[   263.186] Build Operating System: Linux 3.3.7-1-ARCH i686 
[   263.187] Current Operating System: Linux shenhao 3.6.6-1-ARCH #1 SMP PREEMPT Mon Nov 5 13:14:42 CET 2012 i686
[   263.187] Kernel command line: root=/dev/sda8 ro nomodeset 
[   263.187] Build Date: 01 June 2012  04:02:59PM
[   263.187]  
[   263.187] Current version of pixman: 0.28.0
[   263.187] 	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
[   263.188] Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[   263.188] (==) Log file: "/var/log/Xorg.0.log", Time: Mon Nov 26 16:25:02 2012
[   263.188] (==) Using config file: "/etc/X11/xorg.conf"
[   263.188] (==) Using config directory: "/etc/X11/xorg.conf.d"
[   263.189] (==) ServerLayout "X.org Configured"
[   263.189] (**) |-->Screen "aticonfig-Screen[0]-0" (0)
[   263.189] (**) |   |-->Monitor "aticonfig-Monitor[0]-0"
[   263.189] (**) |   |-->Device "aticonfig-Device[0]-0"
[   263.189] (**) |-->Input Device "Mouse0"
[   263.189] (**) |-->Input Device "Keyboard0"
[   263.189] (==) Automatically adding devices
[   263.189] (==) Automatically enabling devices
[   263.189] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[   263.189] 	Entry deleted from font path.
[   263.189] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[   263.189] 	Entry deleted from font path.
[   263.189] 	(Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[   263.189] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[   263.189] 	Entry deleted from font path.
[   263.189] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[   263.189] 	Entry deleted from font path.
[   263.189] 	(Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[   263.189] (**) FontPath set to:
	/usr/share/fonts/misc/,
	/usr/share/fonts/TTF/,
	/usr/share/fonts/Type1/,
	/usr/share/fonts/100dpi/,
	/usr/share/fonts/misc/,
	/usr/share/fonts/TTF/,
	/usr/share/fonts/Type1/,
	/usr/share/fonts/100dpi/
[   263.189] (**) ModulePath set to "/usr/lib/xorg/modules"
[   263.189] (WW) Hotplugging is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
[   263.189] (WW) Disabling Mouse0
[   263.189] (WW) Disabling Keyboard0
[   263.189] (II) Loader magic: 0x8223580
[   263.190] (II) Module ABI versions:
[   263.190] 	X.Org ANSI C Emulation: 0.4
[   263.190] 	X.Org Video Driver: 11.0
[   263.190] 	X.Org XInput driver : 13.0
[   263.190] 	X.Org Server Extension : 6.0
[   263.191] (--) PCI:*(0:1:0:0) 1002:94c8:1025:012b rev 0, Mem @ 0xd0000000/268435456, 0xcfef0000/65536, I/O @ 0x00002000/256, BIOS @ 0x????????/131072
[   263.191] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[   263.191] (II) "extmod" will be loaded. This was enabled by default and also specified in the config file.
[   263.191] (II) "dbe" will be loaded. This was enabled by default and also specified in the config file.
[   263.191] (II) "glx" will be loaded. This was enabled by default and also specified in the config file.
[   263.191] (II) "record" will be loaded. This was enabled by default and also specified in the config file.
[   263.191] (II) "dri" will be loaded. This was enabled by default and also specified in the config file.
[   263.191] (II) "dri2" will be loaded. This was enabled by default and also specified in the config file.
[   263.191] (II) LoadModule: "dri"
[   263.191] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[   263.191] (II) Module dri: vendor="X.Org Foundation"
[   263.192] 	compiled for 1.11.4, module version = 1.0.0
[   263.192] 	ABI class: X.Org Server Extension, version 6.0
[   263.192] (II) Loading extension XFree86-DRI
[   263.192] (II) LoadModule: "extmod"
[   263.192] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
[   263.192] (II) Module extmod: vendor="X.Org Foundation"
[   263.192] 	compiled for 1.11.4, module version = 1.0.0
[   263.192] 	Module class: X.Org Server Extension
[   263.192] 	ABI class: X.Org Server Extension, version 6.0
[   263.192] (II) Loading extension MIT-SCREEN-SAVER
[   263.192] (II) Loading extension XFree86-VidModeExtension
[   263.192] (II) Loading extension XFree86-DGA
[   263.192] (II) Loading extension DPMS
[   263.192] (II) Loading extension XVideo
[   263.192] (II) Loading extension XVideo-MotionCompensation
[   263.192] (II) Loading extension X-Resource
[   263.192] (II) LoadModule: "dbe"
[   263.192] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
[   263.192] (II) Module dbe: vendor="X.Org Foundation"
[   263.192] 	compiled for 1.11.4, module version = 1.0.0
[   263.192] 	Module class: X.Org Server Extension
[   263.192] 	ABI class: X.Org Server Extension, version 6.0
[   263.192] (II) Loading extension DOUBLE-BUFFER
[   263.192] (II) LoadModule: "glx"
[   263.193] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[   263.193] (II) Module glx: vendor="Advanced Micro Devices, Inc."
[   263.193] 	compiled for 6.9.0, module version = 1.0.0
[   263.193] (II) Loading extension GLX
[   263.193] (II) LoadModule: "record"
[   263.193] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
[   263.193] (II) Module record: vendor="X.Org Foundation"
[   263.193] 	compiled for 1.11.4, module version = 1.13.0
[   263.193] 	Module class: X.Org Server Extension
[   263.193] 	ABI class: X.Org Server Extension, version 6.0
[   263.193] (II) Loading extension RECORD
[   263.193] (II) LoadModule: "dri2"
[   263.194] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[   263.194] (II) Module dri2: vendor="X.Org Foundation"
[   263.194] 	compiled for 1.11.4, module version = 1.2.0
[   263.194] 	ABI class: X.Org Server Extension, version 6.0
[   263.194] (II) Loading extension DRI2
[   263.194] (II) LoadModule: "fglrx"
[   263.194] (II) Loading /usr/lib/xorg/modules/drivers/fglrx_drv.so
[   263.217] (II) Module fglrx: vendor="FireGL - ATI Technologies Inc."
[   263.217] 	compiled for 1.4.99.906, module version = 8.97.2
[   263.217] 	Module class: X.Org Video Driver
[   263.218] (II) Loading sub module "fglrxdrm"
[   263.218] (II) LoadModule: "fglrxdrm"
[   263.218] (II) Loading /usr/lib/xorg/modules/linux/libfglrxdrm.so
[   263.218] (II) Module fglrxdrm: vendor="FireGL - ATI Technologies Inc."
[   263.218] 	compiled for 1.4.99.906, module version = 8.97.2
[   263.218] (II) ATI Proprietary Linux Driver Version Identifier:8.97.2
[   263.218] (II) ATI Proprietary Linux Driver Release Identifier: UNSUPPORTED-8.97.100.3               
[   263.218] (II) ATI Proprietary Linux Driver Build Date: Jul  3 2012 23:56:27
[   263.218] (++) using VT number 2

[   263.218] (WW) Falling back to old probe method for fglrx
[   263.229] (II) Loading PCS database from /etc/ati/amdpcsdb
[   263.230] (--) Chipset Supported AMD Graphics Processor (0x94C8) found
[   263.231] (II) AMD Video driver is running on a device belonging to a group targeted for this release
[   263.231] (II) AMD Video driver is signed
[   263.231] (II) Loading /usr/lib/xorg/modules/drivers/fglrx_drv.so
[   263.231] (II) Loading /usr/lib/xorg/modules/linux/libfglrxdrm.so
[   263.231] (II) fglrx(0): pEnt->device->identifier=0x9ae1af0
[   263.231] (II) fglrx(0): === [xdl_xs111_atiddxPreInit] === begin
[   263.231] (II) Loading sub module "vgahw"
[   263.231] (II) LoadModule: "vgahw"
[   263.231] (II) Loading /usr/lib/xorg/modules/libvgahw.so
[   263.231] (II) Module vgahw: vendor="X.Org Foundation"
[   263.231] 	compiled for 1.11.4, module version = 0.1.0
[   263.231] 	ABI class: X.Org Video Driver, version 11.0
[   263.231] (**) fglrx(0): Depth 24, (--) framebuffer bpp 32
[   263.231] (II) fglrx(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
[   263.231] (==) fglrx(0): Default visual is TrueColor
[   263.231] (**) fglrx(0): Option "DPMS" "true"
[   263.231] (==) fglrx(0): RGB weight 888
[   263.231] (II) fglrx(0): Using 8 bits per RGB 
[   263.232] (==) fglrx(0): Buffer Tiling is ON
[   263.232] (II) Loading sub module "fglrxdrm"
[   263.232] (II) LoadModule: "fglrxdrm"
[   263.232] (II) Loading /usr/lib/xorg/modules/linux/libfglrxdrm.so
[   263.232] (II) Module fglrxdrm: vendor="FireGL - ATI Technologies Inc."
[   263.232] 	compiled for 1.4.99.906, module version = 8.97.2
[   263.233] ukiDynamicMajor: found major device number 250
[   263.233] ukiDynamicMajor: found major device number 250
[   263.233] ukiOpenByBusid: Searching for BusID PCI:1:0:0
[   263.233] ukiOpenDevice: node name is /dev/ati/card0
[   263.233] ukiOpenDevice: open result is 11, (OK)
[   263.233] ukiOpenByBusid: ukiOpenMinor returns 11
[   263.234] ukiOpenByBusid: ukiGetBusid reports PCI:1:0:0
[   263.234] (**) fglrx(0): NoAccel = NO
[   263.234] (**) fglrx(0): ATI 2D Acceleration Architecture enabled
[   263.234] (--) fglrx(0): Chipset: "ATI Mobility Radeon HD 2400 XT" (Chipset = 0x94c8)
[   263.234] (--) fglrx(0): (PciSubVendor = 0x1025, PciSubDevice = 0x012b)
[   263.234] (==) fglrx(0): board vendor info: third party graphics adapter - NOT original ATI
[   263.234] (--) fglrx(0): Linear framebuffer (phys) at 0xd0000000
[   263.234] (--) fglrx(0): MMIO registers at 0xcfef0000
[   263.234] (--) fglrx(0): I/O port at 0x00002000
[   263.234] (==) fglrx(0): ROM-BIOS at 0x000c0000
[   263.239] (II) fglrx(0): AC Adapter is used
[   263.243] (II) fglrx(0): Primary V_BIOS segment is: 0xc000
[   263.244] (II) Loading sub module "vbe"
[   263.244] (II) LoadModule: "vbe"
[   263.244] (II) Loading /usr/lib/xorg/modules/libvbe.so
[   263.244] (II) Module vbe: vendor="X.Org Foundation"
[   263.244] 	compiled for 1.11.4, module version = 1.1.0
[   263.244] 	ABI class: X.Org Video Driver, version 11.0
[   263.244] (II) fglrx(0): VESA BIOS detected
[   263.244] (II) fglrx(0): VESA VBE Version 3.0
[   263.244] (II) fglrx(0): VESA VBE Total Mem: 16384 kB
[   263.245] (II) fglrx(0): VESA VBE OEM: ATI ATOMBIOS
[   263.245] (II) fglrx(0): VESA VBE OEM Software Rev: 10.60
[   263.245] (II) fglrx(0): VESA VBE OEM Vendor: (C) 1988-2005, ATI Technologies Inc. 
[   263.245] (II) fglrx(0): VESA VBE OEM Product: M74
[   263.245] (II) fglrx(0): VESA VBE OEM Product Rev: 01.00
[   263.284] (II) fglrx(0): ATI Video BIOS revision 9 or later detected
[   263.284] (--) fglrx(0): Video RAM: 262144 kByte, Type: DDR2
[   263.284] (II) fglrx(0): PCIE card detected
[   263.284] (--) fglrx(0): Using per-process page tables (PPPT) as GART.
[   263.284] (WW) fglrx(0): board is an unknown third party board, chipset is supported
[   263.302] (II) fglrx(0): Using adapter: 1:0.0.
[   263.350] (II) fglrx(0): [FB] MC range(MCFBBase = 0xc0000000, MCFBSize = 0x10000000)
[   263.578] (II) fglrx(0): Interrupt handler installed at IRQ 48.
[   263.579] (II) fglrx(0): RandR 1.2 support is enabled!
[   263.579] (II) fglrx(0): RandR 1.2 rotation support is enabled!
[   263.579] (==) fglrx(0): Center Mode is disabled 
[   263.579] (II) Loading sub module "fb"
[   263.579] (II) LoadModule: "fb"
[   263.579] (II) Loading /usr/lib/xorg/modules/libfb.so
[   263.579] (II) Module fb: vendor="X.Org Foundation"
[   263.579] 	compiled for 1.11.4, module version = 1.0.0
[   263.579] 	ABI class: X.Org ANSI C Emulation, version 0.4
[   263.579] (II) Loading sub module "ddc"
[   263.579] (II) LoadModule: "ddc"
[   263.579] (II) Module "ddc" already built-in
[   264.048] (II) fglrx(0): Finished Initialize PPLIB!
[   264.198] (II) fglrx(0): Output LVDS using monitor section aticonfig-Monitor[0]-0
[   264.198] (II) fglrx(0): Output DFP1 has no monitor section
[   264.198] (II) fglrx(0): Output CRT1 has no monitor section
[   264.198] (II) fglrx(0): Output TV has no monitor section
[   264.198] (II) Loading sub module "ddc"
[   264.198] (II) LoadModule: "ddc"
[   264.198] (II) Module "ddc" already built-in
[   264.198] (II) fglrx(0): Connected Display0: LVDS
[   264.198] (II) fglrx(0): Display0 EDID data ---------------------------
[   264.198] (II) fglrx(0): Manufacturer: AUO  Model: 4444  Serial#: 0
[   264.198] (II) fglrx(0): Year: 2006  Week: 1
[   264.198] (II) fglrx(0): EDID Version: 1.3
[   264.198] (II) fglrx(0): Digital Display Input
[   264.198] (II) fglrx(0): Max Image Size [cm]: horiz.: 30  vert.: 19
[   264.198] (II) fglrx(0): Gamma: 2.20
[   264.198] (II) fglrx(0): No DPMS capabilities specified
[   264.198] (II) fglrx(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4 
[   264.198] (II) fglrx(0): First detailed timing is preferred mode
[   264.198] (II) fglrx(0): redX: 0.575 redY: 0.335   greenX: 0.315 greenY: 0.550
[   264.198] (II) fglrx(0): blueX: 0.155 blueY: 0.135   whiteX: 0.313 whiteY: 0.329
[   264.198] (II) fglrx(0): Manufacturer's mask: 0
[   264.198] (II) fglrx(0): Supported detailed timing:
[   264.198] (II) fglrx(0): clock: 68.9 MHz   Image Size:  304 x 190 mm
[   264.198] (II) fglrx(0): h_active: 1280  h_sync: 1301  h_sync_end 1333 h_blank_end 1408 h_border: 0
[   264.198] (II) fglrx(0): v_active: 800  v_sync: 803  v_sync_end 808 v_blanking: 816 v_border: 0
[   264.198] (II) fglrx(0): Unknown vendor-specific block f
[   264.198] (II) fglrx(0):  AUO
[   264.198] (II) fglrx(0):  B141EW04 V4
[   264.198] (II) fglrx(0): EDID (in hex):
[   264.198] (II) fglrx(0): 	00ffffffffffff0006af444400000000
[   264.199] (II) fglrx(0): 	01100103801e13780a7fe59355508c27
[   264.199] (II) fglrx(0): 	22505400000001010101010101010101
[   264.199] (II) fglrx(0): 	010101010101ee1a0080502010301520
[   264.199] (II) fglrx(0): 	350030be100000180000000f00000000
[   264.199] (II) fglrx(0): 	00000000000000000020000000fe0041
[   264.199] (II) fglrx(0): 	554f0a202020202020202020000000fe
[   264.199] (II) fglrx(0): 	004231343145573034205634200a00be
[   264.199] (II) fglrx(0): End of Display0 EDID data --------------------
[   264.289] (II) fglrx(0): EDID for output LVDS
[   264.289] (II) fglrx(0): Manufacturer: AUO  Model: 4444  Serial#: 0
[   264.289] (II) fglrx(0): Year: 2006  Week: 1
[   264.289] (II) fglrx(0): EDID Version: 1.3
[   264.289] (II) fglrx(0): Digital Display Input
[   264.289] (II) fglrx(0): Max Image Size [cm]: horiz.: 30  vert.: 19
[   264.289] (II) fglrx(0): Gamma: 2.20
[   264.289] (II) fglrx(0): No DPMS capabilities specified
[   264.289] (II) fglrx(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4 
[   264.289] (II) fglrx(0): First detailed timing is preferred mode
[   264.289] (II) fglrx(0): redX: 0.575 redY: 0.335   greenX: 0.315 greenY: 0.550
[   264.289] (II) fglrx(0): blueX: 0.155 blueY: 0.135   whiteX: 0.313 whiteY: 0.329
[   264.289] (II) fglrx(0): Manufacturer's mask: 0
[   264.289] (II) fglrx(0): Supported detailed timing:
[   264.289] (II) fglrx(0): clock: 68.9 MHz   Image Size:  304 x 190 mm
[   264.289] (II) fglrx(0): h_active: 1280  h_sync: 1301  h_sync_end 1333 h_blank_end 1408 h_border: 0
[   264.289] (II) fglrx(0): v_active: 800  v_sync: 803  v_sync_end 808 v_blanking: 816 v_border: 0
[   264.289] (II) fglrx(0): Unknown vendor-specific block f
[   264.289] (II) fglrx(0):  AUO
[   264.289] (II) fglrx(0):  B141EW04 V4
[   264.290] (II) fglrx(0): EDID (in hex):
[   264.290] (II) fglrx(0): 	00ffffffffffff0006af444400000000
[   264.290] (II) fglrx(0): 	01100103801e13780a7fe59355508c27
[   264.290] (II) fglrx(0): 	22505400000001010101010101010101
[   264.290] (II) fglrx(0): 	010101010101ee1a0080502010301520
[   264.290] (II) fglrx(0): 	350030be100000180000000f00000000
[   264.290] (II) fglrx(0): 	00000000000000000020000000fe0041
[   264.290] (II) fglrx(0): 	554f0a202020202020202020000000fe
[   264.290] (II) fglrx(0): 	004231343145573034205634200a00be
[   264.290] (II) fglrx(0): EDID vendor "AUO", prod id 17476
[   264.290] (II) fglrx(0): Printing DDC gathered Modelines:
[   264.290] (II) fglrx(0): Modeline "1280x800"x0.0   68.94  1280 1301 1333 1408  800 803 808 816 -hsync -vsync (49.0 kHz)
[   264.290] (II) fglrx(0): Printing probed modes for output LVDS
[   264.290] (II) fglrx(0): Modeline "1280x800"x60.0   68.94  1280 1301 1333 1408  800 803 808 816 +hsync +vsync (49.0 kHz)
[   264.290] (II) fglrx(0): Modeline "1280x768"x60.0   68.94  1280 1301 1333 1408  768 803 808 816 +hsync +vsync (49.0 kHz)
[   264.290] (II) fglrx(0): Modeline "1280x720"x60.0   68.94  1280 1301 1333 1408  720 803 808 816 +hsync +vsync (49.0 kHz)
[   264.290] (II) fglrx(0): Modeline "1024x768"x60.0   68.94  1024 1301 1333 1408  768 803 808 816 +hsync +vsync (49.0 kHz)
[   264.290] (II) fglrx(0): Modeline "1024x600"x60.0   68.94  1024 1301 1333 1408  600 803 808 816 +hsync +vsync (49.0 kHz)
[   264.290] (II) fglrx(0): Modeline "800x600"x60.0   68.94  800 1301 1333 1408  600 803 808 816 +hsync +vsync (49.0 kHz)
[   264.290] (II) fglrx(0): Modeline "800x480"x60.0   68.94  800 1301 1333 1408  480 803 808 816 +hsync +vsync (49.0 kHz)
[   264.290] (II) fglrx(0): Modeline "720x480"x60.0   68.94  720 1301 1333 1408  480 803 808 816 +hsync +vsync (49.0 kHz)
[   264.290] (II) fglrx(0): Modeline "640x480"x60.0   68.94  640 1301 1333 1408  480 803 808 816 +hsync +vsync (49.0 kHz)
[   264.290] (II) fglrx(0): EDID for output DFP1
[   264.290] (II) fglrx(0): EDID for output CRT1
[   264.290] (II) fglrx(0): EDID for output TV
[   264.290] (II) fglrx(0): Output LVDS connected
[   264.290] (II) fglrx(0): Output DFP1 disconnected
[   264.290] (II) fglrx(0): Output CRT1 disconnected
[   264.290] (II) fglrx(0): Output TV disconnected
[   264.290] (II) fglrx(0): Using exact sizes for initial modes
[   264.290] (II) fglrx(0): Output LVDS using initial mode 1280x800
[   264.290] (II) fglrx(0): Display dimensions: (300, 190) mm
[   264.290] (II) fglrx(0): DPI set to (108, 106)
[   264.290] (II) fglrx(0): Adapter ATI Mobility Radeon HD 2400 XT has 2 configurable heads and 1 displays connected.
[   264.290] (==) fglrx(0):  PseudoColor visuals disabled
[   264.290] (II) Loading sub module "ramdac"
[   264.290] (II) LoadModule: "ramdac"
[   264.290] (II) Module "ramdac" already built-in
[   264.290] (==) fglrx(0): NoDRI = NO
[   264.290] (==) fglrx(0): Capabilities: 0x00000000
[   264.290] (==) fglrx(0): CapabilitiesEx: 0x00000000
[   264.290] (==) fglrx(0): OpenGL ClientDriverName: "fglrx_dri.so"
[   264.290] (==) fglrx(0): UseFastTLS=0
[   264.291] (==) fglrx(0): BlockSignalsOnLock=1
[   264.291] (--) Depth 24 pixmap format is 32 bpp
[   264.292] (II) Loading extension ATIFGLRXDRI
[   264.292] (II) fglrx(0): doing swlDriScreenInit
[   264.292] (II) fglrx(0): swlDriScreenInit for fglrx driver
[   264.292] ukiDynamicMajor: found major device number 250
[   264.292] ukiDynamicMajor: found major device number 250
[   264.292] ukiDynamicMajor: found major device number 250
[   264.292] ukiOpenByBusid: Searching for BusID PCI:1:0:0
[   264.292] ukiOpenDevice: node name is /dev/ati/card0
[   264.292] ukiOpenDevice: open result is 16, (OK)
[   264.292] ukiOpenByBusid: ukiOpenMinor returns 16
[   264.292] ukiOpenByBusid: ukiGetBusid reports PCI:1:0:0
[   264.292] (II) fglrx(0): [uki] DRM interface version 1.0
[   264.292] (II) fglrx(0): [uki] created "fglrx" driver at busid "PCI:1:0:0"
[   264.292] (II) fglrx(0): [uki] added 8192 byte SAREA at 0x225000
[   264.292] (II) fglrx(0): [uki] mapped SAREA 0x225000 to 0xb7231000
[   264.292] (II) fglrx(0): [uki] framebuffer handle = 0x226000
[   264.292] (II) fglrx(0): [uki] added 1 reserved context for kernel
[   264.292] (II) fglrx(0): swlDriScreenInit done
[   264.292] (II) fglrx(0): Kernel Module Version Information:
[   264.292] (II) fglrx(0):     Name: fglrx
[   264.292] (II) fglrx(0):     Version: 8.97.2
[   264.292] (II) fglrx(0):     Date: Jul  4 2012
[   264.292] (II) fglrx(0):     Desc: ATI FireGL DRM kernel module
[   264.292] (II) fglrx(0): Kernel Module version matches driver.
[   264.292] (II) fglrx(0): Kernel Module Build Time Information:
[   264.292] (II) fglrx(0):     Build-Kernel UTS_RELEASE:        3.6.6-1-ARCH
[   264.292] (II) fglrx(0):     Build-Kernel MODVERSIONS:        no
[   264.292] (II) fglrx(0):     Build-Kernel __SMP__:            no
[   264.292] (II) fglrx(0):     Build-Kernel PAGE_SIZE:          0x1000
[   264.293] (II) fglrx(0): [uki] register handle = 0x00227000
[   264.313] (II) fglrx(0): DRI initialization successfull
[   264.313] (II) fglrx(0): FBADPhys: 0xc0000000 FBMappedSize: 0x01004000
[   264.314] (==) fglrx(0): Backing store disabled
[   264.314] (II) Loading extension FGLRXEXTENSION
[   264.314] (**) fglrx(0): DPMS enabled
[   264.314] (II) fglrx(0): Initialized in-driver Xinerama extension
[   264.314] (**) fglrx(0): Textured Video is enabled.
[   264.314] (II) LoadModule: "glesx"
[   264.314] (II) Loading /usr/lib/xorg/modules/glesx.so
[   264.315] (II) Module glesx: vendor="X.Org Foundation"
[   264.316] 	compiled for 1.4.99.906, module version = 1.0.0
[   264.316] (II) Loading extension GLESX
[   264.316] (II) fglrx(0): GLESX enableFlags = 528
[   264.316] (II) fglrx(0): GLESX is enabled
[   264.316] (II) LoadModule: "amdxmm"
[   264.316] (II) Loading /usr/lib/xorg/modules/amdxmm.so
[   264.316] (II) Module amdxmm: vendor="X.Org Foundation"
[   264.316] 	compiled for 1.4.99.906, module version = 2.0.0
[   264.316] (II) Loading extension AMDXVOPL
[   264.316] (II) Loading extension AMDXVBA
[   264.317] (II) fglrx(0): UVD feature is enabled(II) fglrx(0): 
[   264.321] (II) fglrx(0): Enable composite support successfully
[   264.321] (WW) fglrx(0): Option "VendorName" is not used
[   264.321] (WW) fglrx(0): Option "ModelName" is not used
[   264.321] (II) fglrx(0): X context handle = 0x1
[   264.321] (II) fglrx(0): [DRI] installation complete
[   264.322] (==) fglrx(0): Silken mouse enabled
[   264.322] (==) fglrx(0): Using HW cursor of display infrastructure!
[   264.322] (II) fglrx(0): Disabling in-server RandR and enabling in-driver RandR 1.2.
[   264.322] (II) fglrx(0): 'LVDS LCD' ConnectorType, abstracted as 'Panel'
[   264.322] (II) fglrx(0): 'eDP LCD' ConnectorType, abstracted as 'Panel'
[   264.327] (II) fglrx(0): Cannot get TV Format. Set all TV geometry value to zero!
[   264.327] (II) fglrx(0): Cannot set TV horizontal size.
[   264.327] (II) fglrx(0): Cannot get TV Format for trying to adjust horizontal position after horizontal size changed. 
[   264.327] (II) fglrx(0): Cannot set TV horizontal position.
[   264.327] (II) fglrx(0): Cannot set TV vertical position.
[   264.381] (--) RandR disabled
[   264.381] (II) Initializing built-in extension Generic Event Extension
[   264.381] (II) Initializing built-in extension SHAPE
[   264.381] (II) Initializing built-in extension MIT-SHM
[   264.381] (II) Initializing built-in extension XInputExtension
[   264.381] (II) Initializing built-in extension XTEST
[   264.381] (II) Initializing built-in extension BIG-REQUESTS
[   264.381] (II) Initializing built-in extension SYNC
[   264.381] (II) Initializing built-in extension XKEYBOARD
[   264.381] (II) Initializing built-in extension XC-MISC
[   264.381] (II) Initializing built-in extension SECURITY
[   264.381] (II) Initializing built-in extension XINERAMA
[   264.381] (II) Initializing built-in extension XFIXES
[   264.381] (II) Initializing built-in extension RENDER
[   264.381] (II) Initializing built-in extension RANDR
[   264.381] (II) Initializing built-in extension COMPOSITE
[   264.381] (II) Initializing built-in extension DAMAGE
[   264.385] ukiDynamicMajor: found major device number 250
[   264.385] ukiDynamicMajor: found major device number 250
[   264.385] ukiOpenByBusid: Searching for BusID PCI:1:0:0
[   264.385] ukiOpenDevice: node name is /dev/ati/card0
[   264.385] ukiOpenDevice: open result is 17, (OK)
[   264.385] ukiOpenByBusid: ukiOpenMinor returns 17
[   264.385] ukiOpenByBusid: ukiGetBusid reports PCI:1:0:0
[   264.519] (II) AIGLX: Loaded and initialized OpenGL driver(II) GLX: Initialized DRI GL provider for screen 0
[   264.540] (II) fglrx(0): Enable the clock gating!
[   264.540] (II) fglrx(0): Setting screen physical size to 338 x 211
[   264.682] (II) config/udev: Adding input device Power Button (/dev/input/event4)
[   264.682] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[   264.682] (II) LoadModule: "evdev"
[   264.682] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[   264.682] (II) Module evdev: vendor="X.Org Foundation"
[   264.682] 	compiled for 1.10.99.902, module version = 2.6.0
[   264.682] 	Module class: X.Org XInput Driver
[   264.682] 	ABI class: X.Org XInput driver, version 13.0
[   264.682] (II) Using input driver 'evdev' for 'Power Button'
[   264.683] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[   264.683] (**) Power Button: always reports core events
[   264.683] (**) Power Button: Device: "/dev/input/event4"
[   264.683] (--) Power Button: Found keys
[   264.683] (II) Power Button: Configuring as keyboard
[   264.683] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input4/event4"
[   264.683] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[   264.683] (**) Option "xkb_rules" "evdev"
[   264.683] (**) Option "xkb_model" "evdev"
[   264.683] (**) Option "xkb_layout" "us"
[   264.722] (II) config/udev: Adding input device Video Bus (/dev/input/event5)
[   264.722] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[   264.722] (II) Using input driver 'evdev' for 'Video Bus'
[   264.722] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[   264.722] (**) Video Bus: always reports core events
[   264.722] (**) Video Bus: Device: "/dev/input/event5"
[   264.722] (--) Video Bus: Found keys
[   264.722] (II) Video Bus: Configuring as keyboard
[   264.722] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/device:02/LNXVIDEO:00/input/input5/event5"
[   264.722] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[   264.722] (**) Option "xkb_rules" "evdev"
[   264.722] (**) Option "xkb_model" "evdev"
[   264.722] (**) Option "xkb_layout" "us"
[   264.723] (II) config/udev: Adding input device Lid Switch (/dev/input/event2)
[   264.723] (II) No input driver specified, ignoring this device.
[   264.723] (II) This device may have been added with another device file.
[   264.723] (II) config/udev: Adding input device Sleep Button (/dev/input/event3)
[   264.723] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[   264.723] (II) Using input driver 'evdev' for 'Sleep Button'
[   264.723] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[   264.723] (**) Sleep Button: always reports core events
[   264.723] (**) Sleep Button: Device: "/dev/input/event3"
[   264.723] (--) Sleep Button: Found keys
[   264.723] (II) Sleep Button: Configuring as keyboard
[   264.723] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input3/event3"
[   264.723] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 8)
[   264.723] (**) Option "xkb_rules" "evdev"
[   264.723] (**) Option "xkb_model" "evdev"
[   264.723] (**) Option "xkb_layout" "us"
[   264.724] (II) config/udev: Adding input device Acer CrystalEye webcam (/dev/input/event13)
[   264.724] (**) Acer CrystalEye webcam: Applying InputClass "evdev keyboard catchall"
[   264.724] (II) Using input driver 'evdev' for 'Acer CrystalEye webcam'
[   264.724] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[   264.724] (**) Acer CrystalEye webcam: always reports core events
[   264.724] (**) Acer CrystalEye webcam: Device: "/dev/input/event13"
[   264.724] (--) Acer CrystalEye webcam: Found keys
[   264.724] (II) Acer CrystalEye webcam: Configuring as keyboard
[   264.724] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.7/usb1/1-3/1-3:1.0/input/input14/event13"
[   264.724] (II) XINPUT: Adding extended input device "Acer CrystalEye webcam" (type: KEYBOARD, id 9)
[   264.724] (**) Option "xkb_rules" "evdev"
[   264.724] (**) Option "xkb_model" "evdev"
[   264.724] (**) Option "xkb_layout" "us"
[   264.724] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event9)
[   264.724] (II) No input driver specified, ignoring this device.
[   264.725] (II) This device may have been added with another device file.
[   264.725] (II) config/udev: Adding input device HDA Intel Line (/dev/input/event10)
[   264.725] (II) No input driver specified, ignoring this device.
[   264.725] (II) This device may have been added with another device file.
[   264.725] (II) config/udev: Adding input device HDA Intel Mic (/dev/input/event11)
[   264.725] (II) No input driver specified, ignoring this device.
[   264.725] (II) This device may have been added with another device file.
[   264.725] (II) config/udev: Adding input device HDA Intel Front Headphone (/dev/input/event12)
[   264.725] (II) No input driver specified, ignoring this device.
[   264.726] (II) This device may have been added with another device file.
[   264.726] (II) config/udev: Adding input device Logitech USB Laser Mouse (/dev/input/event1)
[   264.726] (**) Logitech USB Laser Mouse: Applying InputClass "evdev pointer catchall"
[   264.726] (II) Using input driver 'evdev' for 'Logitech USB Laser Mouse'
[   264.726] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[   264.726] (**) Logitech USB Laser Mouse: always reports core events
[   264.726] (**) Logitech USB Laser Mouse: Device: "/dev/input/event1"
[   264.726] (--) Logitech USB Laser Mouse: Found 3 mouse buttons
[   264.726] (--) Logitech USB Laser Mouse: Found scroll wheel(s)
[   264.726] (--) Logitech USB Laser Mouse: Found relative axes
[   264.726] (--) Logitech USB Laser Mouse: Found x and y relative axes
[   264.726] (II) Logitech USB Laser Mouse: Configuring as mouse
[   264.726] (II) Logitech USB Laser Mouse: Adding scrollwheel support
[   264.726] (**) Logitech USB Laser Mouse: YAxisMapping: buttons 4 and 5
[   264.726] (**) Logitech USB Laser Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[   264.726] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.2/usb7/7-1/7-1:1.0/input/input1/event1"
[   264.726] (II) XINPUT: Adding extended input device "Logitech USB Laser Mouse" (type: MOUSE, id 10)
[   264.726] (II) Logitech USB Laser Mouse: initialized for relative axes.
[   264.726] (**) Logitech USB Laser Mouse: (accel) keeping acceleration scheme 1
[   264.726] (**) Logitech USB Laser Mouse: (accel) acceleration profile 0
[   264.726] (**) Logitech USB Laser Mouse: (accel) acceleration factor: 2.000
[   264.726] (**) Logitech USB Laser Mouse: (accel) acceleration threshold: 4
[   264.727] (II) config/udev: Adding input device Logitech USB Laser Mouse (/dev/input/mouse0)
[   264.727] (II) No input driver specified, ignoring this device.
[   264.727] (II) This device may have been added with another device file.
[   264.727] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[   264.727] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[   264.727] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[   264.727] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[   264.727] (**) AT Translated Set 2 keyboard: always reports core events
[   264.727] (**) AT Translated Set 2 keyboard: Device: "/dev/input/event0"
[   264.727] (--) AT Translated Set 2 keyboard: Found keys
[   264.727] (II) AT Translated Set 2 keyboard: Configuring as keyboard
[   264.727] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[   264.727] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 11)
[   264.727] (**) Option "xkb_rules" "evdev"
[   264.727] (**) Option "xkb_model" "evdev"
[   264.727] (**) Option "xkb_layout" "us"
[   264.728] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event8)
[   264.728] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchpad catchall"
[   264.728] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad catchall"
[   264.728] (II) LoadModule: "synaptics"
[   264.728] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[   264.728] (II) Module synaptics: vendor="X.Org Foundation"
[   264.728] 	compiled for 1.11.0, module version = 1.5.0
[   264.729] 	Module class: X.Org XInput Driver
[   264.729] 	ABI class: X.Org XInput driver, version 13.0
[   264.729] (II) Using input driver 'synaptics' for 'SynPS/2 Synaptics TouchPad'
[   264.729] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[   264.729] (**) SynPS/2 Synaptics TouchPad: always reports core events
[   264.729] (**) Option "Device" "/dev/input/event8"
[   264.730] (--) synaptics: SynPS/2 Synaptics TouchPad: x-axis range 1472 - 5472
[   264.730] (--) synaptics: SynPS/2 Synaptics TouchPad: y-axis range 1408 - 4448
[   264.730] (--) synaptics: SynPS/2 Synaptics TouchPad: pressure range 0 - 255
[   264.730] (--) synaptics: SynPS/2 Synaptics TouchPad: finger width range 0 - 0
[   264.730] (--) synaptics: SynPS/2 Synaptics TouchPad: buttons: left right scroll-buttons
[   264.730] (--) synaptics: SynPS/2 Synaptics TouchPad: Vendor 0x2 Product 0x7
[   264.730] (**) Option "TapButton1" "1"
[   264.730] (**) Option "TapButton2" "2"
[   264.730] (**) Option "TapButton3" "3"
[   264.730] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[   264.730] (**) SynPS/2 Synaptics TouchPad: always reports core events
[   264.730] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio2/input/input8/event8"
[   264.730] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD, id 12)
[   264.730] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MinSpeed is now constant deceleration 2.5
[   264.730] (**) synaptics: SynPS/2 Synaptics TouchPad: MaxSpeed is now 1.75
[   264.730] (**) synaptics: SynPS/2 Synaptics TouchPad: AccelFactor is now 0.040
[   264.731] (**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1
[   264.731] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration profile 1
[   264.731] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000
[   264.731] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4
[   264.731] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[   264.731] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse1)
[   264.731] (II) No input driver specified, ignoring this device.
[   264.731] (II) This device may have been added with another device file.
[   264.731] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event14)
[   264.731] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchpad catchall"
[   264.731] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad catchall"
[   264.731] (II) Using input driver 'synaptics' for 'SynPS/2 Synaptics TouchPad'
[   264.731] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[   264.732] (**) SynPS/2 Synaptics TouchPad: always reports core events
[   264.732] (**) Option "Device" "/dev/input/event14"
[   264.732] (--) synaptics: SynPS/2 Synaptics TouchPad: x-axis range 1472 - 5472
[   264.732] (--) synaptics: SynPS/2 Synaptics TouchPad: y-axis range 1408 - 4448
[   264.732] (--) synaptics: SynPS/2 Synaptics TouchPad: pressure range 0 - 255
[   264.732] (--) synaptics: SynPS/2 Synaptics TouchPad: finger width range 0 - 0
[   264.732] (--) synaptics: SynPS/2 Synaptics TouchPad: buttons: left right scroll-buttons
[   264.732] (--) synaptics: SynPS/2 Synaptics TouchPad: Vendor 0x2 Product 0x7
[   264.732] (**) Option "TapButton1" "1"
[   264.732] (**) Option "TapButton2" "2"
[   264.732] (**) Option "TapButton3" "3"
[   264.732] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[   264.732] (**) SynPS/2 Synaptics TouchPad: always reports core events
[   264.732] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio3/input/input15/event14"
[   264.732] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD, id 13)
[   264.732] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MinSpeed is now constant deceleration 2.5
[   264.732] (**) synaptics: SynPS/2 Synaptics TouchPad: MaxSpeed is now 1.75
[   264.732] (**) synaptics: SynPS/2 Synaptics TouchPad: AccelFactor is now 0.040
[   264.733] (**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1
[   264.733] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration profile 1
[   264.733] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000
[   264.733] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4
[   264.733] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[   264.733] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse2)
[   264.733] (II) No input driver specified, ignoring this device.
[   264.733] (II) This device may have been added with another device file.
[   264.733] (II) config/udev: Adding input device PC Speaker (/dev/input/event6)
[   264.733] (II) No input driver specified, ignoring this device.
[   264.733] (II) This device may have been added with another device file.
[   264.734] (II) config/udev: Adding input device Acer BMA150 accelerometer (/dev/input/event7)
[   264.734] (II) No input driver specified, ignoring this device.
[   264.734] (II) This device may have been added with another device file.
[   264.734] (II) config/udev: Adding input device Acer BMA150 accelerometer (/dev/input/js0)
[   264.734] (II) No input driver specified, ignoring this device.
[   264.734] (II) This device may have been added with another device file.
[   264.748] (II) fglrx(0): Restoring Recent Mode via PCS is not supported in RANDR 1.2 capable environments
[   265.566] (II) fglrx(0): EDID vendor "AUO", prod id 17476
[   265.566] (II) fglrx(0): Printing DDC gathered Modelines:
[   265.566] (II) fglrx(0): Modeline "1280x800"x0.0   68.94  1280 1301 1333 1408  800 803 808 816 -hsync -vsync (49.0 kHz)
[   265.592] (WW) fglrx(0): Cannot get updated TV attributes.
[   265.696] (II) fglrx(0): EDID vendor "AUO", prod id 17476
[   265.696] (II) fglrx(0): Printing DDC gathered Modelines:
[   265.696] (II) fglrx(0): Modeline "1280x800"x0.0   68.94  1280 1301 1333 1408  800 803 808 816 -hsync -vsync (49.0 kHz)
[   265.722] (WW) fglrx(0): Cannot get updated TV attributes
cat /var/log/Xorg.0.log
回复