[分享]N卡驱动安装启用详解

[hethe]

按照楼主的做法后，问题未能解决：
结果如下

代码： 全选

# nvidia-xconfig: X configuration file generated by nvidia-xconfig
# nvidia-xconfig:  version 1.0  (buildmeister@builder3)  Thu Feb 14 18:20:37 PST 2008


Section "ServerLayout"
    Identifier     "Layout0"
    Screen      0  "Screen0" 0 0
    InputDevice    "Keyboard0" "CoreKeyboard"
    InputDevice    "Mouse0" "CorePointer"
EndSection

Section "Files"
    RgbPath         "/usr/X11R6/lib/X11/rgb"
EndSection

Section "Module"
    Load           "dbe"
    Load           "extmod"
    Load           "type1"
    Load           "freetype"
    Load           "glx"
EndSection

Section "InputDevice"

    # generated from default
    Identifier     "Mouse0"
    Driver         "mouse"
    Option         "Protocol" "auto"
    Option         "Device" "/dev/psaux"
    Option         "Emulate3Buttons" "no"
    Option         "ZAxisMapping" "4 5"
EndSection

Section "InputDevice"

    # generated from default
    Identifier     "Keyboard0"
    Driver         "kbd"
EndSection

Section "Monitor"
    Identifier     "Monitor0"
    VendorName     "Unknown"
    ModelName      "Unknown"
    HorizSync       30.0 - 110.0
    VertRefresh     50.0 - 150.0
    Option         "DPMS"
EndSection

Section "Device"
    Identifier     "Device0"
    Driver         "nvidia"
    VendorName     "NVIDIA Corporation"
EndSection

Section "Screen"
    Identifier     "Screen0"
    Device         "Device0"
    Monitor        "Monitor0"
    DefaultDepth    24
    Option         "AddARGBGLXVisuals" "True"
    SubSection     "Display"
        Depth       24
    EndSubSection
EndSection

Section "Extensions"
    Option         "Composite" "Enable"
EndSection

运行 sudo nvidia-glx-config enable
sudo: nvidia-glx-config: command not found

运行 sudo nvidia-xconfig --add-argb-glx-visuals --composite

Using X configuration file: "/etc/X11/xorg.conf".
Option "AddARGBGLXVisuals" "True" added to Screen "Screen0".
Backed up file '/etc/X11/xorg.conf' as '/etc/X11/xorg.conf.backup'
New X configuration file written to '/etc/X11/xorg.conf'


设置桌面效果说无效无法启用桌面效果

我之前的那个显卡驱动也检测不到了

你显卡是什么？用的哪个驱动?开机是否有nvidia的logo？分辨率是否正常？

[大西瓜YY]

之前有个显卡的logo 但是现在没有了 我的是8400MGS显卡

安装的是 nvidia-glx-new 之前有驱动但是我删了几次又装了几次 但是我的显卡驱动都一直找不到


分辨率不正常 一直要调

[hethe]

大西瓜YY

你这样试试：
把下面几行都注释掉：

Load "dbe"
Load "extmod"
Load "type1"
Load "freetype"

然后在

Option "AddARGBGLXVisuals" "True"
SubSection "Display"
Depth 24

后面加：

Modes "nvidia-auto-select"

[tcgbp]

代码： 全选

tc@tc-desktop:~$ sudo nvidia-xconfig --add-argb-glx-visuals --composite

Using X configuration file: "/etc/X11/xorg.conf".

WARNING: The CorePointer device was not specified explicitly in the layout;
         using the first CorePointer in the config input list.


WARNING: The CoreKeyboard device was not specified explicitly in the layout;
         using the first keyboard device.

Option "AddARGBGLXVisuals" "True" added to Screen "Default Screen".
Backed up file '/etc/X11/xorg.conf' as '/etc/X11/xorg.conf.backup'
New X configuration file written to '/etc/X11/xorg.conf'

无法打开

[一天又天]

太感谢楼主了，对这个菜鸟来讲，太好了，我就是靠这个，让我带8300显卡的系统进了图形，太好了！！！好感动！

[123050326]

LZ，我的无法开启桌面效果阿！！我的是ubuntu 8.04 ＋6150集成显卡！
以前用7.10可以开启。。下面是我的信息。帮我看看是什么问题，谢谢阿！

# nvidia-settings: X configuration file generated by nvidia-settings
# nvidia-settings: version 1.0 (buildd@vernadsky) Thu Jun 5 09:26:53 UTC 2008
# xorg.conf (X.Org X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the xorg.conf manual page.
# (Type "man xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
# sudo dpkg-reconfigure -phigh xserver-xorg

Section "Screen"
Identifier "Default Screen"
Device "Configured Video Device"
Monitor "Configured Monitor"
SubSection "Display"
Virtual 1400 1050
Depth 24
Modes "1024x768@60" "1024x768@43" "1024x768@70" "1152x864@75" "1024x768@75" "1280x960@60" "1024x768@85" "1280x1024@60" "832x624@75" "1400x1050@60" "800x600@60" "800x600@85" "800x600@75" "800x600@72" "800x600@56" "640x480@85" "640x480@75" "640x480@72" "640x480@60"
EndSubSection
Option "AddARGBGLXVisuals" "True"
Defaultdepth 24
EndSection

Section "Screen"
# Removed Option "metamodes" "1024x768@75 +0+0; 1024x768@60 +0+0; 1024x768@43 +0+0; 1024x768@70 +0+0; 1024x768@85 +0+0; 832x624@75 +0+0; 800x600@60 +0+0; 800x600@85 +0+0; 800x600@75 +0+0; 800x600@72 +0+0; 800x600@56 +0+0; 640x480@85 +0+0; 640x480@75 +0+0; 640x480@72 +0+0; 640x480@60 +0+0"
Identifier "Screen0"
Device "Videocard0"
Monitor "Monitor0"
Option "TwinView" "0"
Option "TwinViewXineramaInfoOrder" "CRT-0"
Option "metamodes" "1024x768_75 +0+0; nvidia-auto-select +0+0; 1024x768 +0+0"
Option "AddARGBGLXVisuals" "True"
Defaultdepth 24
EndSection

Section "Device"
Identifier "Configured Video Device"
Driver "nvidia"
Vendorname "NVIDIA"
Boardname "NVIDIA GeForce 6 Series"
Busid "PCI:0:5:0"
Screen 0
EndSection

Section "Device"
Identifier "Videocard0"
Driver "nvidia"
Vendorname "NVIDIA Corporation"
Boardname "GeForce 6150"
EndSection

Section "InputDevice"
Identifier "Generic Keyboard"
Driver "kbd"
Option "XkbRules" "xorg"
Option "XkbModel" "pc105"
Option "XkbLayout" "cn"
Option "XkbOptions" "lv3:ralt_switch"
EndSection

Section "InputDevice"
Identifier "Configured Mouse"
Driver "mouse"
Option "CorePointer"
EndSection

Section "ServerLayout"
Identifier "Default Layout"
screen 0 "Screen0" 0 0
EndSection

Section "Module"
Load "glx"
Load "v4l"
EndSection

Section "Monitor"
Identifier "Configured Monitor"
Vendorname "Philips"
Modelname "Philips 107B(17inch/CM6800)"
Horizsync 30.0 - 69.0
Vertrefresh 50.0 - 130.0
Gamma 1
modeline "640x480@60" 25.2 640 656 752 800 480 490 492 525 -hsync -vsync
modeline "640x480@72" 31.5 640 664 704 832 480 489 491 520 -hsync -vsync
modeline "640x480@75" 31.5 640 656 720 840 480 481 484 500 -hsync -vsync
modeline "640x480@85" 36.0 640 696 752 832 480 481 484 509 -hsync -vsync
modeline "800x600@56" 36.0 800 824 896 1024 600 601 603 625 +hsync +vsync
modeline "800x600@72" 50.0 800 856 976 1040 600 637 643 666 +hsync +vsync
modeline "800x600@75" 49.5 800 816 896 1056 600 601 604 625 +hsync +vsync
modeline "800x600@85" 56.3 800 832 896 1048 600 601 604 631 +hsync +vsync
modeline "800x600@60" 40.0 800 840 968 1056 600 601 605 628 +hsync +vsync
modeline "832x624@75" 57.3 832 864 928 1152 624 625 628 667 -hsync -vsync
modeline "1024x768@85" 94.5 1024 1072 1168 1376 768 769 772 808 +hsync +vsync
modeline "1024x768@75" 78.8 1024 1040 1136 1312 768 769 772 800 +hsync +vsync
modeline "1024x768@70" 75.0 1024 1048 1184 1328 768 771 777 806 -hsync -vsync
modeline "1024x768@60" 65.0 1024 1048 1184 1344 768 771 777 806 -hsync -vsync
modeline "1024x768@43" 44.9 1024 1032 1208 1264 768 768 776 817 +hsync +vsync interlace
modeline "1152x864@75" 108.0 1152 1216 1344 1600 864 865 868 900 +hsync +vsync
modeline "1280x960@60" 102.1 1280 1360 1496 1712 960 961 964 994 -hsync +vsync
modeline "1280x1024@60" 108.0 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync
modeline "1400x1050@60" 122.6 1400 1488 1640 1880 1050 1051 1054 1087 -hsync +vsync
EndSection

Section "Monitor"
Identifier "Monitor0"
Vendorname "Unknown"
Modelname "CRT-0"
Horizsync 30.0 - 69.0
Vertrefresh 50.0 - 130.0
EndSection

Section "ServerFlags"
Option "Xinerama" "0"
EndSection

Section "Extensions"
Option "Composite" "Enable"
EndSection

[xiaomai0907]

我用的是nVIDIA GeForce4 MX440显卡分辨率都不能超过640*480