smplayer快进之后无声。
-
- 帖子: 42
- 注册时间: 2007-06-05 23:44
smplayer快进之后无声。
用smplayer放电影,经常快进之后就没声了,怎么回事呢?
- astolia
- 论坛版主
- 帖子: 6703
- 注册时间: 2008-09-18 13:11
Re: smplayer快进之后无声。
在smplayer的设置里面把记录mplayer输出打开,然后播放时看mplayer输出了啥
-
- 帖子: 42
- 注册时间: 2007-06-05 23:44
Re: smplayer快进之后无声。
我不懂得看,是不是这个?
alsa-resume: resume supported by hardware
[rv40 @ 0xb6b4aae0]Invalid decoder state: B-frame without reference data.
Error while decoding frame!
[rv40 @ 0xb6b4aae0]Invalid decoder state: B-frame without reference data.
Error while decoding frame!
[rv40 @ 0xb6b4aae0]Invalid decoder state: B-frame without reference data.
Error while decoding frame!
[rv40 @ 0xb6b4aae0]warning: first frame is no keyframe
[aac @ 0xb6b4aae0]Number of bands (13) exceeds limit (11).
lavc_audio: error
[aac @ 0xb6b4aae0]Number of bands (48) exceeds limit (33).
lavc_audio: error
[aac @ 0xb6b4aae0]Sample rate index in program config element does not match the sample rate index configured by the container.
[aac @ 0xb6b4aae0]Reserved bit set.
lavc_audio: error
[rv40 @ 0xb6b4aae0]First slice header is incorrect
Error while decoding frame!
[rv40 @ 0xb6b4aae0]warning: first frame is no keyframe
[aac @ 0xb6b4aae0]Prediction is not allowed in AAC-LC.
lavc_audio: error
[aac @ 0xb6b4aae0]channel element 2.1 is not allocated
lavc_audio: error
[aac @ 0xb6b4aae0]channel element 2.11 is not allocated
lavc_audio: error
[aac @ 0xb6b4aae0]Sample rate index in program config element does not match the sample rate index configured by the container.
[aac @ 0xb6b4aae0]Number of bands (8) exceeds limit (7).
lavc_audio: error
alsa-pause: pause supported by hardware
===== PAUSE ===== 72%
ID_PAUSED
ID_PAUSEDastolia 写了:在smplayer的设置里面把记录mplayer输出打开,然后播放时看mplayer输出了啥
alsa-resume: resume supported by hardware
[rv40 @ 0xb6b4aae0]Invalid decoder state: B-frame without reference data.
Error while decoding frame!
[rv40 @ 0xb6b4aae0]Invalid decoder state: B-frame without reference data.
Error while decoding frame!
[rv40 @ 0xb6b4aae0]Invalid decoder state: B-frame without reference data.
Error while decoding frame!
[rv40 @ 0xb6b4aae0]warning: first frame is no keyframe
[aac @ 0xb6b4aae0]Number of bands (13) exceeds limit (11).
lavc_audio: error
[aac @ 0xb6b4aae0]Number of bands (48) exceeds limit (33).
lavc_audio: error
[aac @ 0xb6b4aae0]Sample rate index in program config element does not match the sample rate index configured by the container.
[aac @ 0xb6b4aae0]Reserved bit set.
lavc_audio: error
[rv40 @ 0xb6b4aae0]First slice header is incorrect
Error while decoding frame!
[rv40 @ 0xb6b4aae0]warning: first frame is no keyframe
[aac @ 0xb6b4aae0]Prediction is not allowed in AAC-LC.
lavc_audio: error
[aac @ 0xb6b4aae0]channel element 2.1 is not allocated
lavc_audio: error
[aac @ 0xb6b4aae0]channel element 2.11 is not allocated
lavc_audio: error
[aac @ 0xb6b4aae0]Sample rate index in program config element does not match the sample rate index configured by the container.
[aac @ 0xb6b4aae0]Number of bands (8) exceeds limit (7).
lavc_audio: error
alsa-pause: pause supported by hardware
===== PAUSE ===== 72%
ID_PAUSED
- ahwad
- 帖子: 1116
- 注册时间: 2009-05-06 0:36
Re: smplayer快进之后无声。
改音频为alsa
- astolia
- 论坛版主
- 帖子: 6703
- 注册时间: 2008-09-18 13:11
Re: smplayer快进之后无声。
都2014年了还在看rmvb的啊。。。对rmvb中的raac音频支持一直都有点问题
-
- 帖子: 42
- 注册时间: 2007-06-05 23:44
Re: smplayer快进之后无声。
呃~~网上下载,什么格式都有可能:)astolia 写了:都2014年了还在看rmvb的啊。。。对rmvb中的raac音频支持一直都有点问题
快进后无声的现象,不只是rmvb,其他格式也一样。
- astolia
- 论坛版主
- 帖子: 6703
- 注册时间: 2008-09-18 13:11
Re: smplayer快进之后无声。
smplayer不知道你用的是哪个后端,如果是mplayer的话,你可以试试换成mplayer2。czbuyi 写了:呃~~网上下载,什么格式都有可能:)astolia 写了:都2014年了还在看rmvb的啊。。。对rmvb中的raac音频支持一直都有点问题
快进后无声的现象,不只是rmvb,其他格式也一样。
另外smplayer里和声音相关的设置,也要自己调一调
或者换vlc播放器试试
-
- 帖子: 42
- 注册时间: 2007-06-05 23:44
Re: smplayer快进之后无声。
VLC也会有同样的问题。怎么换成mplayer2呢?astolia 写了:smplayer不知道你用的是哪个后端,如果是mplayer的话,你可以试试换成mplayer2。czbuyi 写了:呃~~网上下载,什么格式都有可能:)astolia 写了:都2014年了还在看rmvb的啊。。。对rmvb中的raac音频支持一直都有点问题
快进后无声的现象,不只是rmvb,其他格式也一样。
另外smplayer里和声音相关的设置,也要自己调一调
或者换vlc播放器试试
- astolia
- 论坛版主
- 帖子: 6703
- 注册时间: 2008-09-18 13:11
Re: smplayer快进之后无声。
14.04的话直接安装 sudo apt-get install mplayer2
也可以试着改改smplayer里面的缓存大小设置,记得我以前遇到过某些视频文件不能用缓存,必须设置成0才能正常播放
也可以试着改改smplayer里面的缓存大小设置,记得我以前遇到过某些视频文件不能用缓存,必须设置成0才能正常播放
- nyfair
- 帖子: 1067
- 注册时间: 2007-12-07 12:49
- 系统: winnux10
- 来自: Tree New Bee
Re: smplayer快进之后无声。
http://git.mplayer2.org/mplayer2/astolia 写了:14.04的话直接安装 sudo apt-get install mplayer2
也可以试着改改smplayer里面的缓存大小设置,记得我以前遇到过某些视频文件不能用缓存,必须设置成0才能正常播放
mplayer2都死了半年多了,新的api,蓝光库和HW更新都不支持你能不要不懂装懂误导人么?
rmvb虽老,放到今天仍然远优于某些所谓的高新技术astolia 写了:都2014年了还在看rmvb的啊。。。对rmvb中的raac音频支持一直都有点问题
raac生成的是标准MPEG-4 LC-AAC,什么aac解码器都能解,能有什么问题?
可能会有问题的是更早的real6时代的cook,不是上个世纪压的片应该见不到
前端我现在只推荐一个,国产QtAV,干净清爽性能优越
viewtopic.php?f=74&t=402094
本人在此论坛仅负责吐槽,问题急需解决请支付宝转账5毛至{我的id@qq.com},将会竭诚为您服务
linux常见多媒体问题处理指南
1. 视频播放有问题->卸载gstreamer
2. 音频播放有问题->卸载pulseaudio
3. 远程播放有问题->卸载avahi
4. 系统全都有问题->卸载systemd,远离Lennart这傻逼让你从此轻松自在
⇩自由网络⇩
https://github.com/nyfair/freeweb
linux常见多媒体问题处理指南
1. 视频播放有问题->卸载gstreamer
2. 音频播放有问题->卸载pulseaudio
3. 远程播放有问题->卸载avahi
4. 系统全都有问题->卸载systemd,远离Lennart这傻逼让你从此轻松自在
⇩自由网络⇩
https://github.com/nyfair/freeweb
- astolia
- 论坛版主
- 帖子: 6703
- 注册时间: 2008-09-18 13:11
Re: smplayer快进之后无声。
现在ubuntu源里的mplayer2是r701,发布于2013年初。而mplayer是1.1版,发布于2012年6月。你所谓的“新的api,蓝光库和HW更新”它能比mplayer2支持的好?到底是谁在不懂装懂误导人?真是笑话nyfair 写了: http://git.mplayer2.org/mplayer2/
mplayer2都死了半年多了,新的api,蓝光库和HW更新都不支持你能不要不懂装懂误导人么?
标准是标准,实现是实现。日志都明明白白把acc解码器出现的问题写出来了。竟然视而不见,真是服了。nyfair 写了:rmvb虽老,放到今天仍然远优于某些所谓的高新技术astolia 写了:都2014年了还在看rmvb的啊。。。对rmvb中的raac音频支持一直都有点问题
raac生成的是标准MPEG-4 LC-AAC,什么aac解码器都能解,能有什么问题?
可能会有问题的是更早的real6时代的cook,不是上个世纪压的片应该见不到
- nyfair
- 帖子: 1067
- 注册时间: 2007-12-07 12:49
- 系统: winnux10
- 来自: Tree New Bee
Re: smplayer快进之后无声。
无知还嘴硬真是酷炫,转移话题的功力也太次了,我压根就没提过mplayer。现在是什么年代?mplayer2这种玩票性质的东西能跟官方本家比?不会编译只能用源,底下QtAV直接提供astolia 写了: 现在ubuntu源里的mplayer2是r701,发布于2013年初。而mplayer是1.1版,发布于2012年6月。你所谓的“新的api,蓝光库和HW更新”它能比mplayer2支持的好?到底是谁在不懂装懂误导人?真是笑话
你看日志的功底实在捉鸡astolia 写了: 标准是标准,实现是实现。日志都明明白白把acc解码器出现的问题写出来了。竟然视而不见,真是服了。
代码: 全选
[rv40 @ 0xb6b4aae0]Invalid decoder state: B-frame without reference data.
Error while decoding frame!
[rv40 @ 0xb6b4aae0]warning: first frame is no keyframe
[aac @ 0xb6b4aae0]Number of bands (13) exceeds limit (11).
lavc_audio: error
[aac @ 0xb6b4aae0]Sample rate index in program config element does not match the sample rate index configured by the container.
[aac @ 0xb6b4aae0]Reserved bit set.
lavc_audio: error
[rv40 @ 0xb6b4aae0]First slice header is incorrect
Error while decoding frame!
[rv40 @ 0xb6b4aae0]warning: first frame is no keyframe
[aac @ 0xb6b4aae0]Prediction is not allowed in AAC-LC.
lavc_audio: error
正常播放的东西,帧都没解出来你跟我这不是demuxer的bug而是decoder的问题?这还真是巧妇难为无米之炊czbuyi 写了: 经常快进之后就没声了
快进后无声的现象,不只是rmvb,其他格式也一样
本人在此论坛仅负责吐槽,问题急需解决请支付宝转账5毛至{我的id@qq.com},将会竭诚为您服务
linux常见多媒体问题处理指南
1. 视频播放有问题->卸载gstreamer
2. 音频播放有问题->卸载pulseaudio
3. 远程播放有问题->卸载avahi
4. 系统全都有问题->卸载systemd,远离Lennart这傻逼让你从此轻松自在
⇩自由网络⇩
https://github.com/nyfair/freeweb
linux常见多媒体问题处理指南
1. 视频播放有问题->卸载gstreamer
2. 音频播放有问题->卸载pulseaudio
3. 远程播放有问题->卸载avahi
4. 系统全都有问题->卸载systemd,远离Lennart这傻逼让你从此轻松自在
⇩自由网络⇩
https://github.com/nyfair/freeweb
-
- 帖子: 42
- 注册时间: 2007-06-05 23:44
Re: smplayer快进之后无声。
呃,,,,我看不懂了 
